NTCLE413 Thermistors Datasheet

NTCLE413 Datasheet, PDF, Equivalent


Part Number

NTCLE413

Description

NTC Thermistors

Manufacture

Vishay

Total Page 10 Pages
Datasheet
Download NTCLE413 Datasheet


NTCLE413
www.vishay.com
NTCLE413
Vishay BCcomponents
NTC Thermistors, Mini Epoxy PVC Twin Insulated Leads
ADDITIONAL RESOURCES
3D 3D
3D Models
Design Tools
QUICK REFERENCE DATA
PARAMETER
VALUE
Resistance value at 25 °C
4.7K to 100K
Tolerance on R25-value
B25/85-value
Tolerance on B25/85
Operating temperature
range at zero dissipation
± 1.0 to ± 5.0
3435 to 4190
± 0.5 to ± 1.5
-40 to 105
Maximum power
dissipation at 55 °C
Accuracy of temperature
measurement (for 1 %
types)
Dissipation factor 
(in still air)
Response time
(in oil)
Climatic category
(LCT / UCT / days)
Minimum dielectric
withstanding voltage
between leads and
coated body
100
± 0.5 between 0 and 40
± 1.0 between -40 and 80
3
2.5
40 / 105 / 28
500
Weight (40 mm length)
0.2
UNIT
%
K
%
°C
mW
°C
mW/K
s
VRMS
g
FEATURES
• High adhesive strength between the PVC wire
and the encapsulating lacquer
• Accurate down to ± 0.3°C
• Small body of max. 3 mm for easy installation
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Available
APPLICATIONS
• Temperature measurement, sensing, and control
• On battery packs, heat-sinks, tubing, enclosures, etc.
DESCRIPTION
These sensors consist of small NTC chip soldered between
stranded AWG #30, 105 °C resistant, PVC (UL2651).
Terminations are solder dipped. They are lacquered and
insulated with a black epoxy coating.
MARKING
Black lacquered body without additional mark
PACKAGING
SPQ: 125 items (for standard 40 mm lead wire length)
MOUNTING
By soldering the wire end, or crimping connector. The body
can be inserted in a tube, free in air, tape attached or glued.
Not intended for fluid immersed applications or continuous
contact with water. Not for potting in hard material or
over-molding applications. Consult Vishay for specific
application or mounting.
DESIGN-IN SUPPORT
• For complete curve computation, please
www.vishay.com/thermistors/ntc-curve-list/
• Other R/T curves available on request
• The lead length can be customized
• Connectors can be added to the wire end
visit:
DIMENSIONS in millimeters
Electronic components of assessed quality measured in accordance with IEC 60539-1
Outline
NTCLE413E2
Ø D max.
L
L1 max.
L2
W
Ø d1
Ø d2
D
d2 d1
D
L1
W
L
L2
3.0
40 ± 5 (or refer to table SAP description)
10
3±1
2 (for information)
0.3 ± 0.03
1 (for information)
Revision: 25-Sep-2019
1 Document Number: 29078
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NTCLE413
www.vishay.com
NTCLE413
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
R25
()
R25-TOL.
(± %)
B25/85
(K)
B25/85-TOL.
(± %)
L
(mm)
R/T TABLE
SAP MATERIAL AND ORDERING NUMBER
RoHS COMPLIANT
WITH EXEMPTION (1)
RoHS COMPLIANT
4700
3
3984
0.5
40 ± 5
Table 1 NTCLE413E2472H400
NTCLE413E2472H400A
5000
3
3984
0.5
40 ± 5
Table 2 NTCLE413E2502H400
NTCLE413E2502H400A
10 000
1
3435
1
40 ± 5
Table 3 NTCLE413E2103F400L
NTCLE413E2103F404A
10 000
1
3435
1
52 ± 5
Table 3 NTCLE413E2103F520L
NTCLE413E2103F524A
10 000
1
3435
1
1000 ± 20 Table 3 NTCLE413E2103F102L
NTCLE413E2103F106A
10 000
5
3435
1
52 ± 5
Table 4 NTCLE413E2103J520L
NTCLE413E2103J524A
10 000
3
3984
0.5
40 ± 5
Table 5 NTCLE413E2103H400
NTCLE413E2103H400A
10 000
3
3984
0.5 400 ± 10 Table 5 NTCLE413E2103H401
NTCLE413E2103H401A
47 000
3
4090
1.5
40 ± 5
Table 6 NTCLE413E2473H400
NTCLE413E2473H400A
100 000
3
4190
1.5
40 ± 5
Table 7 NTCLE413E2104H400
NTCLE413E2104H400A
Notes
• Preferred types are marked in bold
(1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in
capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound
Revision: 25-Sep-2019
2 Document Number: 29078
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Features www.vishay.com NTCLE413 Vishay BCcompon ents NTC Thermistors, Mini Epoxy PVC T win Insulated Leads ADDITIONAL RESOURC ES 3D 3D 3D Models Design Tools QUIC K REFERENCE DATA PARAMETER VALUE Res istance value at 25 °C 4.7K to 100K Tolerance on R25-value B25/85-value Tol erance on B25/85 Operating temperature range at zero dissipation ± 1.0 to ± 5.0 3435 to 4190 ± 0.5 to ± 1.5 -40 to 105 Maximum power dissipation at 55 °C Accuracy of temperature  measur ement (for 1 % types) Dissipation facto r  (in still air) Response time (in oil) Climatic category (LCT / UCT / days) Minimum dielectric  with standing voltage  between leads and coated body 100 ± 0.5 between 0 an d 40 ± 1.0 between -40 and 80 3  2.5 40 / 105 / 28 500 Weight (40 mm l ength) 0.2 UNIT  % K % °C mW °C mW/K s VRMS g FEATURES • High adhesi ve strength between the PVC wire and th e encapsulating lacquer • Accurate do wn to ± 0.3°C • Small body of max. 3 mm for easy installation • Material categorization: for defin.
Keywords NTCLE413, datasheet, pdf, Vishay, NTC, Thermistors, TCLE413, CLE413, LE413, NTCLE41, NTCLE4, NTCLE, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)