NTCLP100 Thermistors Datasheet

NTCLP100 Datasheet, PDF, Equivalent


Part Number

NTCLP100

Description

NTC Thermistors

Manufacture

Vishay

Total Page 6 Pages
Datasheet
Download NTCLP100 Datasheet


NTCLP100
www.vishay.com
NTCLE400, NTCLS100, NTCLP100
Vishay BCcomponents
NTC Thermistors, Special Long Lead Sensors
FEATURES
• Accurate over wide temperature range
• High stability
• Excellent price / performance ratio
• High adhesive strength between PVC wire and
the encapsulating laquer
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C (R25)
Tolerance on R25-value (2)
B25/85-value
Tolerance on B25/85-value
Operating temperature range at
zero dissipation
Maximum power dissipation
at 55 °C
VALUE
2.2K to 100K
±3
3977 to 4190
± 0.75 to ± 1.5
-40 to +85
250
UNIT
%
K
%
°C
mW
Min. dielectric withstanding
voltage between terminals
and sensor body
1500
VAC
Dissipation factor:
NTCLE400...
NTCLS100...
6.0
mW/K
8.0
NTCLP100...
Response time (1):
NTCLE400...
NTCLS100...
NTCLP100...
Weight
NTCLE400...
NTCLS100...
NTCLP100...
6.0
7
s
15
10
4
g
6
6
Notes
(1) Response time in silicone oil MS 200/50. This is the time needed
for the sensor to reach 63.2 % of the total temperature
difference when subjected to a temperature change from 25 °C
in air to 85 °C in oil
(2) Tighter tolerances on R25 are available upon request
APPLICATIONS
Temperature measurement, sensing and control in remote
locations and for various environmental conditions.
DESCRIPTION
These sensors exist of a small NTC chip reflow soldered
between two AWG #24 UL-2468 wires. They are lacquered
and insulated with black epoxy (NTCLE400 type), sleeved
(NTCLS100 type) or potted into a brass pipe (NTCLP100
type).
MARKING
UL mark on wire, no mark on body.
PACKAGING
The thermistors are packed in cardboard boxes; each box
containing 500 pieces.
DESIGN-IN SUPPORT
Other wire length and wire type (UL-2651 PVC 105 °C) are
available on request. The products can be provided with a
connector on request.
For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/.
MOUNTING
By soldering or clamping the wire ends, in any position.
Body can be inserted or taped attached. Not intended for
fluid immersed applications.
ELECTRICAL DATA AND ORDERING INFORMATION
R25
R25-TOL.
B25/85
B25/85-TOL.
SAP MATERIAL AND ORDERING NUMBER (1)(2)
()
(± %)
(K)
(± %)
EPOXY TYPE
SLEEVED TYPE
PIPE TYPE
2200
3
3977
0.75 NTCLE400E3222H NTCLS100E3222H NTCLP100E3222H
4700
3
3977
0.75 NTCLE400E3472H NTCLS100E3472H NTCLP100E3472H
5000
3
3977
0.75 NTCLE400E3502H NTCLS100E3502H NTCLP100E3502H
10 000
47 000
3
3
3977
4090
0.75 NTCLE400E3103H NTCLS100E3103H NTCLP100E3103H
1.5 NTCLE400E3473H NTCLS100E3473H NTCLP100E3473H
100 000
3
4190
1.5 NTCLE400E3104H NTCLS100E3104H NTCLP100E3104H
Notes
(1) Other values and tolerances based on the NTCC100E4 series are available on request. (www.vishay.com/doc?29058)
(2) The specified catalog numbers refer to products with L = 400 mm, without connector and adopt UL-2468.AWG24 wire
Revision: 24-Aug-17
1 Document Number: 29060
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NTCLP100
www.vishay.com
DIMENSIONS in millimeters
Epoxy-coated type NTCLE400E....
NTCLE400, NTCLS100, NTCLP100
Vishay BCcomponents
6 max.
17 ± 3
L
L = 400 mm + 15/- 0
Other wire lengths or connector attached available on request.
Sleeved type NTCLS100E....
8 max.
15 max.
25 ± 5
L = 400 mm + 15/- 0
Other wire lengths or connector attached available on request.
Brass-pipe type NTCLP100E....
L
5±2
5±2
6 ± 0.1
25 ± 0.5
L
L = 400 mm + 15/- 0
Other wire lengths or connector attached available on request.
DERATING
Power derating curve.
P
(%)
100
5±2
0
- 40 0
55
Note
• Zero power is considered as measuring power max. 1 % of max. power
85 125
Tamb (°C)
Revision: 24-Aug-17
2 Document Number: 29060
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Features www.vishay.com NTCLE400, NTCLS100, NTCL P100 Vishay BCcomponents NTC Thermisto rs, Special Long Lead Sensors FEATURES • Accurate over wide temperature ran ge • High stability • Excellent pri ce / performance ratio • High adhesiv e strength between PVC wire and the enc apsulating laquer • Material categori zation:  for definitions of complian ce please see www.vishay.com/doc?99912 QUICK REFERENCE DATA PARAMETER Resist ance value at 25 °C (R25) Tolerance on R25-value (2) B25/85-value Tolerance o n B25/85-value Operating temperature ra nge at zero dissipation Maximum power d issipation at 55 °C VALUE 2.2K to 100K ±3 3977 to 4190 ± 0.75 to ± 1.5 -40 to +85 250 UNIT  % K % °C mW Min. dielectric withstanding voltag e between terminals and sensor body 1500 VAC Dissipation factor: NTCLE4 00... NTCLS100... 6.0 mW/K 8.0 NTCLP1 00... Response time (1): NTCLE400... NT CLS100... NTCLP100... Weight NTCLE400.. . NTCLS100... NTCLP100... 6.0 7 s  15  10 4 g 6 6 Notes (1) Response time in sili.
Keywords NTCLP100, datasheet, pdf, Vishay, NTC, Thermistors, TCLP100, CLP100, LP100, NTCLP10, NTCLP1, NTCLP, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)