SBRA401N Power Rectifier Datasheet

SBRA401N Datasheet, PDF, Equivalent


Part Number

SBRA401N

Description

Surface Mount Schottky Power Rectifier

Manufacture

ON Semiconductor

Total Page 6 Pages
Datasheet
Download SBRA401N Datasheet


SBRA401N
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
MBRA140, NRVBA140,
NRVBA140N, SBRA140N,
SBRA401N
This device employs the Schottky Barrier principle in a large area
metaltosilicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
Features
Small Compact Surface Mountable Package with JBent Leads
Rectangular Package for Automated Handling
Highly Stable Oxide Passivated Junction
Very Low Forward Voltage Drop
Guardring for Stress Protection
NRVBA & SBRA Prefix for Automotive and Other Applications
Requiring Unique Site and Control Change Requirements;
AECQ101 Qualified and PPAP Capable*
These Devices are PbFree, Halogen Free/BFR Free and are RoHS
Compliant
Mechanical Characteristics
Case: Epoxy, Molded
Weight: 70 mg (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped in 12 mm tape, 5000 units per 13 inch reel
Polarity: Cathode Lead Indicated by Either Notch in Plastic Body
or Polarity Band
www.onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERES
40 VOLTS
SMA
CASE 403D
MARKING DIAGRAM
B14
AYWW G
B14 = Specific Device Code
A = Assembly Location**
Y = Year
WW = Work Week
G = PbFree Package
(Note: Microdot may be in either location)
**The Assembly Location code (A) is front side
optional. In cases where the Assembly Location is
stamped in the package bottom (molding ejecter pin),
the front side assembly code may be blank.
ORDERING INFORMATION
Device
MBRA140T3G
NRVBA140T3G*
NRVBA140NT3G*
Package
SMA
(PbFree)
SMA
(PbFree)
SMA
(PbFree)
Shipping
5,000 /
Tape & Reel
5,000 /
Tape & Reel
5,000 /
Tape & Reel
SBRA140NT3G*
SBRA401NT3G*
SMA
(PbFree)
SMA
(PbFree)
5,000 /
Tape & Reel
5,000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
February, 2020 Rev. 12
1
Publication Order Number:
MBRA140T3/D

SBRA401N
MBRA140, NRVBA140, NRVBA140N, SBRA140N, SBRA401N
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(At Rated VR, TC = 95°C)
Peak Repetitive Forward Current
(At Rated VR, Square Wave, 20 kHz, TC = 100°C)
NonRepetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
VRRM
VRWM
VR
IO
IFRM
IFSM
40
1.0
2.0
30
V
A
A
A
Storage Temperature
Operating Junction Temperature
Voltage Rate of Change
(Rated VR, TJ = 25°C)
ESD Ratings:
Machine Model = C
Human Body Model = 3B
Tstg
TJ
dv/dt
55 to +150
55 to +125
10,000
> 400
> 8000
°C
°C
V/ms
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, JunctiontoLead (Note 1)
Thermal Resistance, JunctiontoAmbient (Note 1)
1. Mounted on 2Square PC Board with 1Square Total Pad Size, PC Board FR4.
Symbol
RqJL
RqJA
Value
35
86
Unit
°C/W
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Maximum Instantaneous Forward Voltage (Note 2)
see Figure 2 for other Values
(IF = 1.0 A)
(IF = 2.0 A)
VF
TJ = 25°C
0.55
0.71
TJ = 100°C
0.505
0.74
V
Maximum Instantaneous Reverse Current
see Figure 4 for other Values
(VR = 40 V)
(VR = 20 V)
IR
TJ = 25°C
0.5
0.1
TJ = 100°C
10
4.0
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: Pulse Width 250 ms, Duty Cycle 2.0%.
www.onsemi.com
2


Features Surface Mount Schottky Power Rectifier S MA Power Surface Mount Package MBRA140 , NRVBA140, NRVBA140N, SBRA140N, SBRA40 1N This device employs the Schottky Bar rier principle in a large area metal− to−silicon power diode. State of the art geometry features epitaxial constru ction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity diode s in surface mount applications where c ompact size and weight are critical to the system. Features • Small Compact Surface Mountable Package with J−Bent Leads • Rectangular Package for Auto mated Handling • Highly Stable Oxide Passivated Junction • Very Low Forwar d Voltage Drop • Guardring for Stress Protection • NRVBA & SBRA Prefix for Automotive and Other Applications Requ iring Unique Site and Control Change Re quirements; AEC−Q101 Qualified and PP AP Capable* • These Devices are Pb− Free, Halogen Free/BFR Free and are RoHS Compliant Mechanical Characteristics • Case: E.
Keywords SBRA401N, datasheet, pdf, ON Semiconductor, Surface, Mount, Schottky, Power, Rectifier, BRA401N, RA401N, A401N, SBRA401, SBRA40, SBRA4, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)