NV25080WF Automotive Grade Datasheet

NV25080WF Datasheet, PDF, Equivalent


Part Number

NV25080WF

Description

EEPROM Serial 8/16-Kb SPI - Automotive Grade

Manufacture

ON Semiconductor

Total Page 14 Pages
Datasheet
Download NV25080WF Datasheet


NV25080WF
NV25080WF, NV25160WF
EEPROM Serial 8/16-Kb SPI
- Automotive Grade 1
in Wettable Flank UDFN8
Package
Description
The NV25080/25160 are EEPROM Serial 8/16Kb SPI
Automotive Grade 1 devices internally organized as 1024x8/2048x8
bits. They feature a 32byte page write buffer and support the Serial
Peripheral Interface (SPI) protocol. The device is enabled through a
Chip Select (CS) input. In addition, the required bus signals are a clock
input (SCK), data input (SI) and data output (SO) lines. The HOLD
input may be used to pause any serial communication with the
NV25080/25160 device. These devices feature software and hardware
write protection, including partial as well as full array protection.
Features
Automotive AECQ100 Grade 1 (40°C to +125°C) Qualified
10 MHz SPI Compatible
1.8 V to 5.5 V Supply Voltage Range
SPI Modes (0,0) & (1,1)
32byte Page Write Buffer
Selftimed Write Cycle
Hardware and Software Protection
Block Write Protection
Protect 1/4, 1/2 or Entire EEPROM Array
Low Power CMOS Technology
1,000,000 Program/Erase Cycles
100 Year Data Retention
Industrial and Extended Temperature Range
8Pad Wettable Flank UDFN8 Packages
These Devices are PbFree, Halogen Free/BFR Free, and RoHS
Compliant
VCC
SI
CS
WP
HOLD
SCK
NV25080WF
NV25160WF
SO
VSS
Figure 1. Functional Symbol
www.onsemi.com
1
UDFN8 (2x2)
(Wettable Flank)
MUW2 SUFFIX
CASE 517AW
1
UDFN8 (2x3)
(Wettable Flank)
MUW3 SUFFIX
CASE 517DH
PIN CONFIGURATIONS
CS 1
SO
VCC
HOLD
WP SCK
VSS SI
UDFN8 (MUW2, MUW3)
(Top View)
Pin Name
CS
SO
WP
VSS
SI
SCK
HOLD
VCC
PIN FUNCTION
Function
Chip Select
Serial Data Output
Write Protect
Ground
Serial Data Input
Serial Clock
Hold Transmission Input
Power Supply
ORDERING INFORMATION
See detailed ordering and shipping information on page 11 of
this data sheet.
© Semiconductor Components Industries, LLC, 2017
April, 2019 Rev. 3
1
Publication Order Number:
NV25080WF/D

NV25080WF
NV25080WF, NV25160WF
Table 1. ABSOLUTE MAXIMUM RATINGS
Parameters
Ratings
Unit
Operating Temperature
45 to +130
°C
Storage Temperature
65 to +150
°C
Voltage on any Pin with Respect to Ground (Note 1)
0.5 to +6.5
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The DC input voltage on any pin should not be lower than 0.5 V or higher than VCC + 0.5 V. During transitions, the voltage on any pin may
undershoot to no less than 1.5 V or overshoot to no more than VCC + 1.5 V, for periods of less than 20 ns.
Table 2. RELIABILITY CHARACTERISTICS (Note 2)
Symbol
Parameter
Min Unit
NEND (Note 3) Endurance
1,000,000
Program / Erase Cycles
TDR Data Retention
100 Years
2. These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AECQ100
and JEDEC test methods.
3. Page Mode, VCC = 5 V, 25°C.
Table 3. DC OPERATING CHARACTERISTICS (VCC = 1.8 V to 5.5 V, TA = 40°C to +125°C, unless otherwise specified.)
Symbol
Parameter
Test Conditions
Min Max
ICCR
ICCW
ISB1
ISB2
IL
ILO
Supply Current (Read Mode)
Supply Current (Write Mode)
Standby Current
Standby Current
Input Leakage Current
Output Leakage Current
Read, VCC = 5.5 V, 5 MHz, SO open
Write, VCC = 5.5 V, 5 MHz, SO open
VIN = GND or VCC, CS = VCC,
WP = VCC, VCC = 5.5 V
VIN = GND or VCC, CS = VCC,
WP = GND, VCC = 5.5 V
VIN = GND or VCC
CS = VCC,
VOUT = GND or VCC
2
3
2
5
2 2
1 2
VIL1
VIH1
VIL2
VIH2
VOL1
VOH1
Input Low Voltage
Input High Voltage
Input Low Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
VCC 2.5 V
VCC 2.5 V
VCC < 2.5 V
VCC < 2.5 V
IOL = 3.0 mA
IOH = 1.6 mA
0.5
0.7 VCC
0.5
0.8 VCC
VCC 0.8 V
0.3 VCC
VCC + 0.5
0.2 VCC
VCC + 0.5
0.4
Unit
mA
mA
mA
mA
mA
mA
V
V
V
V
V
V
Table 4. PIN CAPACITANCE (TA = 25°C, f = 1.0 MHz, VCC = +5.0 V) (Note 2)
Symbol
Test
Conditions
COUT
CIN
Output Capacitance (SO)
Input Capacitance (CS, SCK, SI, WP, HOLD)
VOUT = 0 V
VIN = 0 V
Min Typ
Max
8
8
Unit
pF
pF
www.onsemi.com
2


Features NV25080WF, NV25160WF EEPROM Serial 8/16 -Kb SPI - Automotive Grade 1 in Wetta ble Flank UDFN8 Package Description The NV25080/25160 are EEPROM Serial 8/16 Kb SPI − Automotive Grade 1 devices internally organized as 1024x8/2048x8 b its. They feature a 32−byte page writ e buffer and support the Serial Periphe ral Interface (SPI) protocol. The devic e is enabled through a Chip Select (CS) input. In addition, the required bus s ignals are a clock input (SCK), data in put (SI) and data output (SO) lines. Th e HOLD input may be used to pause any s erial communication with the NV25080/25 160 device. These devices feature softw are and hardware write protection, incl uding partial as well as full array pro tection. Features • Automotive AEC− Q100 Grade 1 (−40°C to +125°C) Qual ified • 10 MHz SPI Compatible • 1.8 V to 5.5 V Supply Voltage Range • SP I Modes (0,0) & (1,1) • 32−byte Pag e Write Buffer • Self−timed Write C ycle • Hardware and Software Protection • Block Write Protection − Protect 1/4, 1/2 or Entire.
Keywords NV25080WF, datasheet, pdf, ON Semiconductor, EEPROM, Serial, 8/16-Kb, SPI, -, Automotive, Grade, V25080WF, 25080WF, 5080WF, NV25080W, NV25080, NV2508, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)