TS5V330 VIDEO SWITCH Datasheet

TS5V330 Datasheet, PDF, Equivalent


Part Number

TS5V330

Description

QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download TS5V330 Datasheet


TS5V330
TS5V330
www.ti.com .............................................................................................................................................................. SCDS164D – MAY 2004 – REVISED JUNE 2009
QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE
FEATURES
1
Low Differential Gain and Phase
(DG = 0.64%, DP = 0.1 Degrees Typ)
Wide Bandwidth (BW = 300 MHz Min)
Low Crosstalk (XTALK = –63 dB Typ)
Low Power Consumption
(ICC = 3 µA Max)
Bidirectional Data Flow With Near-Zero
Propagation Delay
Low ON-State Resistance (ron = 3 Ω Typ)
VCC Operating Range From 4.5 V to 5.5 V
Ioff Supports Partial-Power-Down Mode
Operation
Data and Control Inputs Provide Undershoot
Clamp Diode
Control Inputs Can Be Driven by TTL or
5-V/3.3-V CMOS Outputs
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 1000-V Charged-Device Model (C101)
Suitable for Both RGB and Composite-Video
Switching
D, DBQ, OR PW PACKAGE
(TOP VIEW)
IN
S1A
S2A
DA
S1B
S2B
DB
GND
1
2
3
4
5
6
7
8
16 VCC
15 EN
14 S1D
13 S2D
12 DD
11 S1C
10 S2C
9 DC
RGY PACKAGE
(TOP VIEW)
S1A 2
S2A 3
DA 4
S1B 5
S2B 6
DB 7
1
8
16
15 EN
14 S1D
13 S2D
12 DD
11 S1C
10 S2C
9
DESCRIPTION/ORDERING INFORMATION
The TS5V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN) input.
When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is
disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data
path of the multiplexer/demultiplexer.
Low differential gain and phase make this switch ideal for composite and RGB video applications. This device
has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging
current will not backflow through the device when it is powered down. This switch maintains isolation during
power off.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2009, Texas Instruments Incorporated

TS5V330
TS5V330
SCDS164D – MAY 2004 – REVISED JUNE 2009 .............................................................................................................................................................. www.ti.com
TA
–40°C to 85°C
ORDERING INFORMATION
PACKAGE (1)
ORDERABLE PART NUMBER
QFN – RGY
Tape and reel
TS5V330RGYR
SOIC – D
Tube
Tape and reel
TS5V330D
TS5V330DR
SSOP (QSOP) – DBQ Tape and reel
TS5V330DBQR
TSSOP – PW
Tube
Tape and reel
TS5V330PW
TS5V330PWR
TOP-SIDE MARKING
TE330
TS5V330
TE330
TE330
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
FUNCTION TABLE
INPUTS
EN IN
LL
LH
HX
INPUT/OUTPUT
D
S1
S2
Z
FUNCTION
D port = S1 port
D port = S2 port
Disconnect
PIN
S1, S2
D
IN
EN
xxxx
PIN DESCRIPTION
DESCRIPTION
Analog video I/Os
Analog video I/Os
Select input
Switch-enable input
2 Submit Documentation Feedback
Product Folder Link(s): TS5V330
Copyright © 2004–2009, Texas Instruments Incorporated


Features TS5V330 www.ti.com .................... ....................................... ....................................... ....................................... ..................... SCDS164D – MAY 2004 – REVISED JUNE 2009 QUAD SPDT WI DE-BANDWIDTH VIDEO SWITCH WITH LOW ON-S TATE RESISTANCE FEATURES 1 • Low Dif ferential Gain and Phase (DG = 0.64%, D P = 0.1 Degrees Typ) • Wide Bandwidth (BW = 300 MHz Min) • Low Crosstalk ( XTALK = –63 dB Typ) • Low Power Con sumption (ICC = 3 µA Max) • Bidirect ional Data Flow With Near-Zero Propagat ion Delay • Low ON-State Resistance ( ron = 3 Ω Typ) • VCC Operating Range From 4.5 V to 5.5 V • Ioff Supports Partial-Power-Down Mode Operation • D ata and Control Inputs Provide Undersho ot Clamp Diode • Control Inputs Can B e Driven by TTL or 5-V/3.3-V CMOS Outpu ts • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Perfo rmance Tested Per JESD 22 – 1000-V Ch arged-Device Model (C101) • Suitable for Both RGB and Composite-Video Switching D, DBQ, OR PW PA.
Keywords TS5V330, datasheet, pdf, etcTI, QUAD, SPDT, WIDE-BANDWIDTH, VIDEO, SWITCH, S5V330, 5V330, V330, TS5V33, TS5V3, TS5V, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)