VIDEO SWITCH. TS5V330C Datasheet


TS5V330C SWITCH. Datasheet pdf. Equivalent


Part Number

TS5V330C

Description

QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH

Manufacture

etcTI

Total Page 24 Pages
Datasheet
Download TS5V330C Datasheet


TS5V330C
TS5V330C
www.ti.com
SCDS276B – APRIL 2009 – REVISED DECEMBER 2009
QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE
Check for Samples: TS5V330C
FEATURES
1
• Low Differential Gain and Phase
(Typical DG = 0.24%, Typical DP = 0.039°)
• Wide Bandwidth (Typical BW > 288 MHz)
• Low Cross-Talk (Typical XTALK = –87 dB)
• Low Power Consumption
(Maximum ICC = 3 μA)
• Bidirectional Data Flow, With Near-Zero
Propagation Delay
• Low ON-State Resistance (Typical rON = 3 )
• VCC Operating Range From 4.5 V to 5.5 V
• Ioff Supports Partial-Power-Down Mode
Operation
• Data and Control Inputs Provide Undershoot
Clamp Diode
• Control Inputs Can be Driven by TTL or
5-V/3.3-V CMOS Outputs
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
• Suitable for Both RGB and Composite Video
Switching
D, DB, DBQ, OR PW PACKAGE
(TOP VIEW)
IN
S1A
S2A
DA
S1B
S2B
DB
GND
1
2
3
4
5
6
7
8
16 VCC
15 EN
14 S1D
13 S2D
12 DD
11 S1C
10 S2C
9 DC
RGY PACKAGE
(TOP VIEW)
S1A
S2A
DA
S1B
S2B
DB
2
3
4
5
6
7
1
8
16
15 EN
14 S1D
13 S2D
12 DD
11 S1C
10 S2C
9
DESCRIPTION/ORDERING INFORMATION
The TS5V330C is a 4-bit 1-of-2 multiplexer/demultiplexer video switch with a single switch-enable (EN) input.
The select (IN) input controls the data path of the multiplexer/demultiplexer. When EN is low, the switch is
enabled and the D port is connected to the S port. When EN is high, the switch is disabled and a high impedance
state exists between the D and S ports.
Low differential gain and phase makes this switch ideal for video applications. The device has a wide bandwidth
and low cross talk which makes it suitable for high frequency video applications. The device can be used for
RGB and composite video switching applications.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging
current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated

TS5V330C
TS5V330C
SCDS276B – APRIL 2009 – REVISED DECEMBER 2009
www.ti.com
TA
–40°C to 85°C
ORDERING INFORMATION
PACKAGE(1) (2)
ORDERABLE PART NUMBER
QFN – RGY
Tape and reel
TS5V330CRGYR
SOIC – D
Tube
Tape and reel
TS5V330CD
TS5V330CDR
SSOP – DB
Tape and reel
TS5V330CDBR
SSOP (QSOP) – DBQ Tape and reel
TS5V330CDBQR
TSSOP – PW
Tube
Tape and reel
TS5V330CPW
TS5V330CPWR
TOP-SIDE MARKING
TE330C
TS5V330C
TE330C
TE330C
TE330C
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
INPUTS
EN IN
LL
LH
HX
Table 1. FUNCTION TABLE
INPUT/OUTPUT
A
S1
S2
Z
FUNCTION
D port = S1 port
D port = S2 port
Disconnect
Table 2. PIN DESCRIPTIONS
PIN NAME
DESCRIPTION
S1, S2 Analog video I/Os
D Analog video I/Os
IN Select input
EN Switch-enable input
2 Submit Documentation Feedback
Product Folder Link(s): TS5V330C
Copyright © 2009, Texas Instruments Incorporated


Features TS5V330C www.ti.com SCDS276B – APRIL 2009 – REVISED DECEMBER 2009 QUAD S PDT WIDE BANDWIDTH VIDEO SWITCH WITH LO W ON-STATE RESISTANCE Check for Sample s: TS5V330C FEATURES 1 • Low Differe ntial Gain and Phase (Typical DG = 0.24 %, Typical DP = 0.039°) • Wide Bandw idth (Typical BW > 288 MHz) • Low Cro ss-Talk (Typical XTALK = –87 dB) • Low Power Consumption (Maximum ICC = 3 μA) • Bidirectional Data Flow, With Near-Zero Propagation Delay • Low ON- State Resistance (Typical rON = 3 Ω) • VCC Operating Range From 4.5 V to 5 .5 V • Ioff Supports Partial-Power-Do wn Mode Operation • Data and Control Inputs Provide Undershoot Clamp Diode Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Pe r JESD 22 – 2000-V Human-Body Model ( A114-B, Class II) – 1000-V Charged-De vice Model (C101) • Suitable for Both RGB and Composite Video Switching D, DB, DBQ, OR PW PACKAGE (TOP VIEW) IN S1A S2A DA S1B S2B DB GND .
Keywords TS5V330C, datasheet, pdf, etcTI, QUAD, SPDT, WIDE, BANDWIDTH, VIDEO, SWITCH, S5V330C, 5V330C, V330C, TS5V330, TS5V33, TS5V3, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)