DS1135L Delay Line Datasheet

DS1135L Datasheet, PDF, Equivalent


Part Number

DS1135L

Description

3V 3-in-1 High-Speed Silicon Delay Line

Manufacture

Maxim Integrated

Total Page 7 Pages
Datasheet
Download DS1135L Datasheet


DS1135L
FEATURES
All-Silicon Timing Circuit
Three Independent Buffered Delays
Stable and Precise Over Temperature and
Voltage
Leading and Trailing Edge Precision
Preserves the Input Symmetry
Vapor Phase and IR Reflow Solderable
Available in Tape and Reel
Delays Specified Over Both Commercial
and Industrial Temperature Ranges
3V Operation
Recommended Replacement for DS1033
DS1135L
3V 3-in-1 High-Speed Silicon
Delay Line
PIN ASSIGNMENT
IN1 1 8 VCC
IN2 2 7 OUT1
IN3 3 6 OUT2
GND
4 5 OUT3
DS1135LZ 8-Pin SO (150 mils)
PIN DESCRIPTION
IN1-IN3
- Input Signals
OUT1-OUT3
- Output Signals
VCC - +3V Supply
GND
- Ground
DESCRIPTION
The DS1135L series is a low-power, 3V high-speed version of the popular DS1013, DS1033, and
DS1035 series.
The DS1135L series of delay lines have three independent logic buffered delays in a single package. The
device is our fastest 3-in-1 delay line. It is available in a 150-mil 8-pin SO.
The device features precise leading and trailing edge accuracy. It has the inherent reliability of an all-
silicon delay line solution.
Standard delay values are indicated in Table 1.
19-6412; Rev 8/12
1 of 6

DS1135L
LOGIC DIAGRAM Figure 1
IN
TIME DELAY
DS1135L
OUT
ONE OF THREE
PART NUMBER DELAY TABLE (tPLH, tPHL) Table 1
PART NUMBER
DELAY PER
OUTPUT
(ns)
INITIAL
TOLERANCE
(Note 1)
TOLERANCE OVER
TEMP AND VOLTAGE
(Note 2)
0°C to +70°C
-40°C to +85°C
DS1135LZ-10+
10/10/10
±1.0ns
±2.0ns
±3.0ns
DS1135LZ-12+
12/12/12
±1.0ns
±2.0ns
±3.0ns
DS1135LZ-15+
15/15/15
±1.0ns
±2.5ns
±4.0ns
DS1135LZ-20+
20/20/20
±1.0ns
±2.5ns
±4.0ns
DS1135LZ-25+
25/25/25
±1.5ns
±3.0ns
±5.0ns
DS1135LZ-30+
30/30/30
±1.5ns
±3.0ns
±5.0ns
+Denotes a lead(Pb)-free/RoHS-compliant package.
NOTES:
1. Nominal conditions are +25°C and VCC = +3.3V.
2. Voltage range of 2.7V to 3.6V.
3. Delay accuracies are for both leading and trailing edges.
TEST SETUP DESCRIPTION
Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1135L.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution) connected to the output. The DS1135L output taps
are selected and connected to the interval counter by a VHF switch control unit. All measurements are
fully automated with each instrument controlled by the computer over an IEEE 488 bus.
2 of 7


Features FEATURES  All-Silicon Timing Circuit  Three Independent Buffered Delays Stable and Precise Over Temperature and Voltage  Leading and Trailing Ed ge Precision Preserves the Input Symmet ry  Vapor Phase and IR Reflow Solder able  Available in Tape and Reel  Delays Specified Over Both Commercial and Industrial Temperature Ranges  3 V Operation  Recommended Replacement for DS1033 DS1135L 3V 3-in-1 High-Spe ed Silicon Delay Line PIN ASSIGNMENT I N1 1 8 VCC IN2 2 7 OUT1 IN3 3 6 OUT2 G ND 4 5 OUT3 DS1135LZ 8-Pin SO (150 mi ls) PIN DESCRIPTION IN1-IN3 - Input Signals OUT1-OUT3 - Output Signals V CC - +3V Supply GND - Ground DESCRIP TION The DS1135L series is a low-power, 3V high-speed version of the popular D S1013, DS1033, and DS1035 series. The D S1135L series of delay lines have three independent logic buffered delays in a single package. The device is our fast est 3-in-1 delay line. It is available in a 150-mil 8-pin SO. The device features precise leading and trailing edge accu.
Keywords DS1135L, datasheet, pdf, Maxim Integrated, 3V, 3-in-1, High-Speed, Silicon, Delay, Line, S1135L, 1135L, 135L, DS1135, DS113, DS11, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)