DS1135 Delay Line Datasheet

DS1135 Datasheet, PDF, Equivalent


Part Number

DS1135

Description

3V 3-in-1 High-Speed Silicon Delay Line

Manufacture

Maxim Integrated

Total Page 7 Pages
Datasheet
Download DS1135 Datasheet


DS1135
FEATURES
All-Silicon Timing Circuit
Three Independent Buffered Delays
Stable and Precise Over Temperature and
Voltage
Leading and Trailing Edge Precision
Preserves the Input Symmetry
Vapor Phasing, IR, and Wave Solderable
Available in Tape and Reel
Commercial and Industrial Temperature
Ranges Available
5V Operation (Refer to DS1135L for 3V
Operation)
Recommended Replacement for DS1013
and DS1035
DS1135
3-in-1 High-Speed Silicon
Delay Line
PIN ASSIGNMENT
IN1 1 8 VCC
IN2 2 7 OUT1
IN3 3 6 OUT2
GND
4 5 OUT3
DS1135Z 8-Pin SO (150 mils)
PIN DESCRIPTION
IN1-IN3
- Input Signals
OUT1-OUT3
- Output Signals
VCC - +5V Supply
GND
- Ground
DESCRIPTION
The DS1135 series is a low-power, +5V high-speed version of the popular DS1013 and DS1035.
The DS1135 series of delay lines have three independent logic buffered delays in a single package. The
device is our fastest 3-in-1 delay line. It is available in a standard 8-pin 150-mil SO.
The device features precise leading and trailing edge accuracy. It has the inherent reliability of an all-
silicon delay line solution. Each output is capable of driving up to 10 LS loads.
Standard delay values are indicated in Table 1.
19-6411; Rev 8/12
1 of 7

DS1135
LOGIC DIAGRAM Figure 1
IN
TIME DELAY
DS1135
OUT
ONE OF THREE
PART NUMBER DELAY TABLE (tPLH, tPHL) Table 1
PART NUMBER
DELAY PER
OUTPUT
(ns)
INITIAL
TOLERANCE
(Note 1)
DS1135Z-6+
DS1135Z-8+
DS1135Z-10+
DS1135Z-12+
DS1135Z-15+
DS1135Z-20+
DS1135Z-25+
DS1135Z-30+
6/6/6
8/8/8
10/10/10
12/12/12
15/15/15
20/20/20
25/25/25
30/30/30
±1.0ns
±1.0ns
±1.0ns
±1.0ns
±1.0ns
±1.0ns
±1.5ns
±1.5ns
TOLERANCE OVER
TEMP AND VOLTAGE
(Note 2)
0°C to +70°C -40°C to +85°C
±1.0ns
±1.5ns
±1.0ns
±1.5ns
±1.0ns
±1.5ns
±1.0ns
±1.5ns
±1.5ns
±2ns
±1.5ns
±2ns
±1.5ns
±2ns
±1.5ns
±2ns
NOTES:
1. Nominal conditions are +25°C and VCC =+5.0V.
2. Voltage range of 4.75V to 5.25V.
3. Delay accuracies are for both leading and trailing edges.
TEST SETUP DESCRIPTION
Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1135.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20ps resolution) connected to the output. The DS1135 output taps
are selected and connected to the interval counter by a VHF switch control unit. All measurements are
fully automated with each instrument controlled by the computer over an IEEE 488 bus.
2 of 7


Features FEATURES  All-Silicon Timing Circuit  Three Independent Buffered Delays Stable and Precise Over Temperature and Voltage  Leading and Trailing Ed ge Precision Preserves the Input Symmet ry  Vapor Phasing, IR, and Wave Sold erable  Available in Tape and Reel Commercial and Industrial Temperatur e Ranges Available  5V Operation (Re fer to DS1135L for 3V Operation)  Re commended Replacement for DS1013 and DS 1035 DS1135 3-in-1 High-Speed Silicon Delay Line PIN ASSIGNMENT IN1 1 8 VCC IN2 2 7 OUT1 IN3 3 6 OUT2 GND 4 5 OU T3 DS1135Z 8-Pin SO (150 mils) PIN DE SCRIPTION IN1-IN3 - Input Signals OU T1-OUT3 - Output Signals VCC - +5V Su pply GND - Ground DESCRIPTION The DS 1135 series is a low-power, +5V high-sp eed version of the popular DS1013 and D S1035. The DS1135 series of delay lines have three independent logic buffered delays in a single package. The device is our fastest 3-in-1 delay line. It is available in a standard 8-pin 150-mil SO. The device features precise leading an.
Keywords DS1135, datasheet, pdf, Maxim Integrated, 3V, 3-in-1, High-Speed, Silicon, Delay, Line, S1135, 1135, 135, DS113, DS11, DS1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)