DS90C402 Signaling Receiver Datasheet

DS90C402 Datasheet, PDF, Equivalent


Part Number

DS90C402

Description

Dual Low Voltage Differential Signaling Receiver

Manufacture

etcTI

Total Page 16 Pages
Datasheet
Download DS90C402 Datasheet


DS90C402
DS90C402
www.ti.com
SNLS001C – JUNE 1998 – REVISED APRIL 2013
DS90C402 Dual Low Voltage Differential Signaling (LVDS) Receiver
Check for Samples: DS90C402
FEATURES
1
2 Ultra Low Power Dissipation
• Operates above 155.5 Mbps
• Standard TIA/EIA-644
• 8 Lead SOIC Package saves PCB space
• VCM ±1V center around 1.2V
• ±100 mV Receiver Sensitivity
DESCRIPTION
The DS90C402 is a dual receiver device optimized
for high data rate and low power applications. This
device along with the DS90C401 provides a pair chip
solution for a dual high speed point-to-point interface.
The device is in a PCB space saving 8 lead small
outline package. The receiver offers ±100 mV
threshold sensitivity, in addition to common-mode
noise protection.
Connection Diagram
Functional Diagram
See Package Number D (SOIC)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated

DS90C402
DS90C402
SNLS001C – JUNE 1998 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings(1)(2)
Supply Voltage (VCC)
Input Voltage (RIN+, RIN)
Output Voltage (ROUT)
Maximum Package Power Dissipation @ +25°C
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Junction Temperature
ESD Rating(3)
D Package
Derate D Package
(HBM, 1.5 kΩ, 100 pF)
(EIAJ, 0 Ω, 200 pF)
0.3V to +6V
0.3V to (VCC + 0.3V)
0.3V to (VCC + 0.3V)
1025 mW
8.2 mW/°C above +25°C
65°C to +150°C
+260°C
+150°C
3,500V
250V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) ESD Rating: HBM (1.5 kΩ, 100 pF) 3,500V EIAJ (0Ω, 200 pF) 250V
Recommended Operating Conditions
Supply Voltage (VCC)
Receiver Input Voltage
Operating Free Air Temperature (TA)
Min Typ Max
+4.5 +5.0 +5.5
GND
2.4
40 +25 +85
Units
V
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.(1)(2)
Symbol
Parameter
Conditions
Pin Min Typ Max Units
VTH Differential Input High Threshold VCM = + 1.2V
VTL Differential Input Low Threshold
IIN Input Current
VIN = +2.4V
VCC = 5.5V
VIN = 0V
VOH Output High Voltage
IOH = 0.4 mA, VID = +200 mV
IOH = 0.4mA, Inputs terminated
IOH = 0.4mA, Inputs Open
IOH = 0.4mA, Inputs Shorted
VOL Output Low Voltage
IOS Output Short Circuit Current
IOL = 2 mA, VID = 200 mV
VOUT = 0V (3)
ICC No Load Supply Current
Inputs Open
RIN+,
RIN
ROUT
VCC
100
10
10
3.8
3.8
3.8
15
±1
±1
4.9
4.9
4.9
4.9
0.07
60
3.5
+100
+10
+10
0.3
100
10
mV
mV
μA
µA
V
V
V
V
V
mA
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified.
(2) All typicals are given for: VCC = +5.0V, TA = +25°C.
(3) Output short circuit current (IOS) is specified as magnitude only, minus sign indicates direction only. Only one output should be shorted
at a time, do not exceed maximum junction temperature specification.
2 Submit Documentation Feedback
Product Folder Links: DS90C402
Copyright © 1998–2013, Texas Instruments Incorporated


Features DS90C402 www.ti.com SNLS001C – JUNE 1998 – REVISED APRIL 2013 DS90C402 D ual Low Voltage Differential Signaling (LVDS) Receiver Check for Samples: DS90 C402 FEATURES 1 •2 Ultra Low Power D issipation • Operates above 155.5 Mbp s • Standard TIA/EIA-644 • 8 Lead S OIC Package saves PCB space • VCM ±1 V center around 1.2V • ±100 mV Recei ver Sensitivity DESCRIPTION The DS90C4 02 is a dual receiver device optimized for high data rate and low power applic ations. This device along with the DS90 C401 provides a pair chip solution for a dual high speed point-to-point interf ace. The device is in a PCB space savin g 8 lead small outline package. The rec eiver offers ±100 mV threshold sensiti vity, in addition to common-mode noise protection. Connection Diagram Functi onal Diagram See Package Number D (SOI C) These devices have limited built-in ESD protection. The leads should be sh orted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the .
Keywords DS90C402, datasheet, pdf, etcTI, Dual, Low, Voltage, Differential, Signaling, Receiver, S90C402, 90C402, 0C402, DS90C40, DS90C4, DS90C, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)