SCHMITT-TRIGGER INVERTER. SN74AHC14-EP Datasheet

SN74AHC14-EP INVERTER. Datasheet pdf. Equivalent

SN74AHC14-EP Datasheet
Recommendation SN74AHC14-EP Datasheet
Part SN74AHC14-EP
Description HEX SCHMITT-TRIGGER INVERTER
Feature SN74AHC14-EP; SN74AHC14-EP HEX SCHMITT-TRIGGER INVERTER D Controlled Baseline – One Assembly/Test Site, One Fabri.
Manufacture etcTI
Datasheet
Download SN74AHC14-EP Datasheet




Texas Instruments SN74AHC14-EP
SN74AHC14-EP
HEX SCHMITT-TRIGGER INVERTER
D Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of
–55°C to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product Change Notification
D Qualification Pedigree
D EPIC(Enhanced-Performance Implanted
CMOS) Process
Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life.
SGDS027 – JULY 2002
D Operating Range 2-V to 5.5-V VCC
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D OR PW PACKAGE
(TOP VIEW)
1A
1Y
2A
2Y
3A
3Y
GND
1
2
3
4
5
6
7
14 VCC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
description
The SN74AHC14 contains six independent inverters. This device performs the Boolean function Y = A.
Each circuit functions as an independent inverter, but because of the Schmitt action, the inverters have different
input threshold levels for positive-going (VT+) and negative-going (VT–) signals.
ORDERING INFORMATION
TA
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
–55°C to 125°C
SOIC – D
TSSOP – PW
Tape and reel
Tape and reel
SN74AHC14MDREP
SN74AHC14MPWREP
AHC14MEP
HA14MEP
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
FUNCTION TABLE
(each inverter)
INPUT OUTPUT
AY
HL
LH
logic diagram (positive logic)
AY
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2002, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1



Texas Instruments SN74AHC14-EP
SN74AHC14-EP
HEX SCHMITT-TRIGGER INVERTER
SGDS027 JULY 2002
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under absolute maximum ratingsmay cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditionsis not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
MIN MAX UNIT
VCC Supply voltage
2 5.5 V
VI Input voltage
0 5.5 V
VO Output voltage
0 VCC V
VCC = 2 V
50 mA
IOH High-level output current
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V
4
mA
8
VCC = 2 V
50 mA
IOL Low-level output current
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V
4
mA
8
TA Operating free-air temperature
55 125 °C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265



Texas Instruments SN74AHC14-EP
SN74AHC14-EP
HEX SCHMITT-TRIGGER INVERTER
SGDS027 JULY 2002
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VT+
Positive-going
input threshold voltage
VT
Negative-going
input threshold voltage
VT
Hysteresis (VT+ VT)
TEST CONDITIONS
VOH
VOL
II
ICC
Ci
IOH = 50 mA
IOH = 4 mA
IOH = 8 mA
IOL = 50 mA
IOL = 4 mA
IOL = 8 mA
VI = 5.5 V or GND
VI = VCC or GND,
VI = VCC or GND
IO = 0
VCC
3V
4.5 V
5.5 V
3V
4.5 V
5.5 V
3V
4.5 V
5.5 V
2V
3V
4.5 V
3V
4.5 V
2V
3V
4.5 V
3V
4.5 V
0 V to 5.5 V
5.5 V
5V
TA = 25°C
MIN TYP MAX
1.2 2.2
1.75 3.15
2.15 3.85
0.9 1.9
1.35 2.75
1.65 3.35
0.3 1.2
0.4 1.4
0.5 1.6
1.9 2
2.9 3
4.4 4.5
2.58
3.94
0.1
0.1
0.1
0.36
0.36
±0.1
2
2 10
MIN MAX UNIT
1.2 2.2
1.75 3.15
2.15 3.85
0.9 1.9
1.35 2.75
1.65 3.35
0.3 1.2
0.4 1.4
0.5 1.6
1.9
2.9
4.4
2.48
3.8
0.1
0.1
0.1
0.5
0.5
±1
20
V
V
V
V
V
mA
mA
pF
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
TA = 25°C
MIN TYP MAX
MIN MAX UNIT
tPLH
tPHL
tPLH
tPHL
A
A
Y CL = 15 pF
8.3 12.8
8.3 12.8
1 15
ns
1 15
10.8 16.3
1 18.5
Y
CL = 50 pF
10.8 16.3
1 18.5
ns
switching characteristics over recommended operating free-air temperature range,
VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
TA = 25°C
MIN TYP MAX
MIN MAX UNIT
tPLH
tPHL
tPLH
tPHL
A
A
Y CL = 15 pF
Y CL = 50 pF
5.5 8.6
5.5 8.6
7 10.6
7 10.6
1 10
ns
1 10
1 12
ns
1 12
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)