SIGNAL MICROCONTROLLER. MSP430F2618-EP Datasheet

MSP430F2618-EP MICROCONTROLLER. Datasheet pdf. Equivalent

MSP430F2618-EP Datasheet
Recommendation MSP430F2618-EP Datasheet
Part MSP430F2618-EP
Description MIXED SIGNAL MICROCONTROLLER
Feature MSP430F2618-EP; MSP430F2618- EP MIXED SIGNAL MICROCONTROLLER SLAS632 -- DECEMBER 2008 FEATURES D Low Supply Voltag.
Manufacture etcTI
Datasheet
Download MSP430F2618-EP Datasheet




etcTI MSP430F2618-EP
MSP430F2618- EP
MIXED SIGNAL MICROCONTROLLER
SLAS632 -- DECEMBER 2008
FEATURES
D Low Supply Voltage Range, 1.8 V to 3.6 V
D Ultra-Low Power Consumption:
-- Active Mode: 365 A at 1 MHz, 2.2 V
-- Standby Mode (VLO): 0.5 A
-- Off Mode (RAM Retention): 0.1 A
D Wake-Up From Standby Mode in Less
Than 1 s
D 16-Bit RISC Architecture,
62.5-ns Instruction Cycle Time
D Three-Channel Internal DMA
D 12-Bit Analog-to-Digital (A/D) Converter
With Internal Reference, Sample-and-Hold,
and Autoscan Feature
D Dual 12-Bit Digital-to-Analog (D/A)
Converters With Synchronization
D 16-Bit Timer_A With Three
Capture/Compare Registers
D 16-Bit Timer_B With Seven
Capture/Compare-With-Shadow Registers
D On-Chip Comparator
D Four Universal Serial Communication
Interfaces (USCIs)
-- USCI_A0 and USCI_A1
-- Enhanced UART Supporting
Auto-Baudrate Detection
-- IrDA Encoder and Decoder
-- Synchronous SPI
-- USCI_B0 and USCI_B1
-- I2Ct
-- Synchronous SPI
description
D Supply Voltage Supervisor/Monitor With
Programmable Level Detection
D Brownout Detector
D Bootstrap Loader
D Serial Onboard Programming,
No External Programming Voltage Needed
Programmable Code Protection by Security
Fuse
D 116KB+256B Flash Memory, 8KB RAM
D Available in 113-Pin Ball Grid Array (BGA)
D For Complete Module Descriptions, See the
MSP430x2xx Family User’s Guide,
Literature Number SLAU144
SUPPORTS DEFENSE, AEROSPACE, AND
MEDICAL APPLICATIONS
D Controlled Baseline
D One Assembly/Test Site
D One Fabrication Site
D Extended Product Life Cycle
D Extended Product--Change Notification
D Product Traceability
D SnPb Solder Ball Alloy for Increased
Reliability
The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code
efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active
mode in less than 1 s.
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range
from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device not to meet its published specifications. These devices have limited
built-in ESD protection.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
I2C is a registered trademark of Philips Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2008, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1



etcTI MSP430F2618-EP
MSP430F2618- EP
MIXED SIGNAL MICROCONTROLLER
SLAS632 -- DECEMBER 2008
description (continued)
The MSP430F2618 is a microcontroller configuration with two built-in 16-bit timers, a fast 12-bit A/D converter,
a comparator, dual 12-bit D/A converters, four universal serial communication interface (USCI) modules, DMA,
and up to 64 I/O pins. Typical applications include sensor systems, industrial control applications, hand-held
meters, etc.
TA
--40C to 105C
AVAILABLE OPTIONS
PACKAGED DEVICES
PLASTIC 113-PIN BGA (GQW)
MSP430F2618TGQW
DEVELOPMENT TOOL SUPPORT
All MSP430 microcontrollers include an Embedded Emulation Module (EEM) allowing advanced debugging
and programming through easy-to-use development tools. Recommended hardware options include:
D Debugging and Programming Interface
-- MSP-FET430UIF (USB)
-- MSP-FET430PIF (Parallel Port)
D Debugging and Programming Interface with Target Board
-- MSP-FET430U64
-- MSP-FET430U80
D Standalone Target Board
-- MSP-TS430PM64
D Production Programmer
-- MSP-GANG430
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265



etcTI MSP430F2618-EP
pin designation
MSP430F2618- EP
MIXED SIGNAL MICROCONTROLLER
SLAS632 -- DECEMBER 2008
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
C1 C2 C3
C11 C12
D1 D2
D4 D5 D6 D7 D8 D9
D11 D12
E1 E2
E4 E5 E6 E7 E8 E9
E11 E12
F1 F2
F4 F5
F8 F9
F11 F12
G1 G2
G4 G5
G8 G9
G11 G12
H1 H2
H4 H5 H6 H7 H8 H9
H11 H12
J1 J2
J4 J5 J6 J7 J8 J9
J11 J12
K1 K2
K11 K12
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12
M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12
Note: For terminal assignments, see the MSP430F261x Terminal Functions table.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)