Noise Amplifier. QM14501 Datasheet

QM14501 Amplifier. Datasheet pdf. Equivalent

QM14501 Datasheet
Recommendation QM14501 Datasheet
Part QM14501
Description BeiDou Low Noise Amplifier
Feature QM14501; QM14501 GPS, GLONASS, and BeiDou Low Noise Amplifier With Integrated Output SAW Filter Product Over.
Manufacture Qorvo
Datasheet
Download QM14501 Datasheet




Qorvo QM14501
QM14501
GPS, GLONASS, and BeiDou Low Noise
Amplifier With Integrated Output SAW Filter
Product Overview
The QM14501 is a Low Noise Amplifier with an integrated
SAW filter at the output. The low noise figure and high gain
make the QM14501 ideal for GNSS receivers requiring high
sensitivity. This module uses pHEMT process and integrates
input matching and low loss, high rejection SAW filter at the
output. This results in a simplified and high-performing receiver
design. The QM14501 is packaged in a 3.3 mm x 2.1 mm x
1.0 mm package with low external component count required
to achieve the best-in-class performance.
Functional Block Diagram
Package Style: module 3.3 mm x 2.1 mm x 1.0 mm
Key Features
Low Noise Figure: 0.9 dB
Gain: 13.5 dB
High IIP3: +8 dBm
Current Tunability Via Single Resistor
Operating frequencies: 1.55 1.61 GHz
Small package: 3.3 mm x 2.1 mm x 1.0 mm (nominal)
Applications
Cellular and Non-Cellular GNSS receivers
(GPS, GLONASS, and BeiDou platforms)
Ordering Information
Part Number
QM14501SB
QM14501SR
QM14501TR13-5K
QM14501PCK401
Description
5 Piece Sample Bag
100 Piece Reel
5000 Piece 13” Reel
Fully Assembled Evaluation Board
QM14501 DS Rev F | Subject to change without notice
1 of 12
www.qorvo.com



Qorvo QM14501
QM14501
GPS, GLONASS, and BeiDou Low Noise
Amplifier With Integrated Output SAW Filter
Absolute Maximum Ratings
Parameter
VDD
Logic SD
Supply Current IDD
RF Input Power
Operating Temperature
Storage Temperature
ESD (HBM)
Rating
3.6
3.6
20
+15
-30 to +85
-65 to +150
TBD
Unit
V
V
mA
dBm
°C
°C
V
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is
not implied.
Nominal Operating Parameters
Parameter
General Performance
VDD Supply Voltage
VDD Supply Current, Gain Mode
VDD Supply Current, Low Current Mode
VDD Supply Current, Shutdown Mode
SD Control Logic Voltage HIGH
SD Control Logic Voltage LOW
SD Control Logic Current
Specification
Min. Typ. Max.
Unit Condition
1.5 3.3 V
8 mA
4.5 mA
0.1 uA
1.0
VDD
V
0 0.4 V
760 uA
QM14501 DS Rev F | Subject to change without notice
2 of 13
www.qorvo.com



Qorvo QM14501
QM14501
GPS, GLONASS, and BeiDou Low Noise
Amplifier With Integrated Output SAW Filter
Electrical Specifications GPS Band (1575.42 MHz ± 12 MHz)
Parameter
Gain Mode
Operating Frequency Range
VDD Supply Current
Gain
Noise Figure
Input Return Loss
Output Return Loss
Reverse Isolation
Input 1dB Compression Point
Input Third Order Intercept Point
Cell Band Rejection
(Relative to 1575 GHz at 827.5 Hz)
PCS Band Rejection (Relative to
1575 GHz at 1885 MHz)
Stability Factor k
Low Current Mode
VDD Supply Current
Gain
Noise Figure
Input Return Loss
Output Return Loss
Reverse Isolation
Input 1dB Compression Point
Input Third Order Intercept Point
Cell Band Rejection
(Relative to 1575 GHz at 827.5 Hz)
PCS Band Rejection (Relative to
1575 GHz at 1885 MHz)
Stability Factor k
Low Voltages
VDD Supply Current
Gain
Noise Figure
Input 1dB Compression Point
Input Third Order Intercept Point
Min.
Specification
Typ.
Max.
1563.42
1587.42
8.8
13.7
0.9
7
24
23
-2
9
54
45
1
4.9
12.8
1.0
6
25
22
0
6
55
44
1
VDD = 2 V VDD = 1.5 V VDD = 1 V
10.5 7.3
4
14 13.5 11.5
0.85 0.95
1.1
-2 -4 -6
10 7.5
3
Unit
MHz
mA
dB
dB
dB
dB
dB
dBm
dBm
dBc
dBc
mA
dB
dB
dB
dB
dB
dBm
dBm
dBc
dBc
mA
dB
dB
dB
dB
Condition
Nominal conditions unless otherwise stated
(T = 25 °C, 50 Ω)
VDD = 2.8 V, VSD = 2.8 V, R2 = 3 kΩ
F1 F2 = 1 MHz, PF1 & PF2 = -30 dBm
20 MHz to 10 GHz
Nominal conditions unless otherwise stated
(T = 25 °C, 50 Ω)
VDD = 2.8 V, VSD = 1.67 V, R2 = 3 kΩ
F1 F2 = 1 MHz, PF1 & PF2 = -30 dBm
20 MHz to 10 GHz
Nominal conditions unless otherwise stated
(T = 25 °C, 50 Ω)
VSD = VDD, R2 = 1.5 kΩ
QM14501 DS Rev F | Subject to change without notice
3 of 13
www.qorvo.com







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)