Thyristors. MKP1V120 Datasheet

MKP1V120 Thyristors. Datasheet pdf. Equivalent

MKP1V120 Datasheet
Recommendation MKP1V120 Datasheet
Part MKP1V120
Description Thyristors
Feature MKP1V120; MKP1V120 Series Axial Lead AXIAL LEAD CASE 59 STYLE 2 Thyristors Surface Mount – 120V - 240V > MKP1.
Manufacture Littelfuse
Datasheet
Download MKP1V120 Datasheet




Littelfuse MKP1V120
MKP1V120 Series
Axial Lead
AXIAL LEAD
CASE 59
STYLE 2
Thyristors
Surface Mount – 120V - 240V > MKP1V120 Series
Pb
Description
Bidirectional devices designed for direct interface with the
ac power line. Upon reaching the breakover voltage in each
direction, the device switches from a blocking state to a
low voltage on−state. Conduction will continue like a Triac
until the main terminal current drops below the holding
current. The plastic axial lead package provides high pulse
current capability at low cost. Glass passivation insures
reliable operation.
Features
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
• Used to Trigger Gates of SCR’s and Triac
• Indicates UL Registered − File #E128662
• These are Pb−Free Devices
Functional Diagram
Additional Information
Datasheet
Resources
Samples
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 08/30/17



Littelfuse MKP1V120
Thyristors
Surface Mount – 120V - 240V > MKP1V120 Series
Maximum Ratings (TJ = 25°C unless otherwise noted)
Rating
Peak Repetitive Off−State Voltage (Note 1)
(− 40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open)
MKP1V120 / MKP1V130 / MKP1V160 / MCR25MG
MCR25NG
On-State RMS Current (All Conduction Angles; TL = 80°C,
Lead Length = 3/8")
Peak Non-Repetitive Surge Current
(60 Hz One Cycle, Sine Wave, TJ = 125°C)
Operating Junction Temperature Range
Storage Temperature Range
Symbol
VDRM,
VRRM
IT (RMS)
ITSM
TJ
Tstg
Value
±90
±180
±0.9
±4.0
-40 to +125
-40 to +150
Unit
V
A
A
°C
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is
not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Thermal Characteristics
Rating
Thermal Resistance, Junction−to−Lead Lead Length = 3/8"
Lead Solder Temperature
(Lead Length ≥ 1/16" from Case, 10 s Max)
Symbol
R8JL
TL
Value
40
260
Unit
°C/W
°C
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 08/30/17



Littelfuse MKP1V120
Thyristors
Surface Mount – 120V - 240V > MKP1V120 Series
Electrical Characteristics - OFF (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol
Min
Typ Max
Repetitive Peak Off−State Current TJ = 25ºC (50 to 60 Hz Sine Wave)
VDRM = 90V, MKP1V120, MKP1V130 and MKP1V160
VDRM = 180V, MKP1V240
IDRM
-
- 5.0
Unit
µA
Electrical Characteristics - ON (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol Min Typ Max
35 µA MKP1V120
110 _ 130
Breakover Voltage
35 µA MKP1V130
120 _ 140
VBO
200µA MKP1V160
150 _ 170
35 µA MKP1V240
220 _ 250
Peak On−State Voltage
(ITM = 1 A Peak, Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%)
Dynamic Holding Current (Sine Wave, 50 to 60 Hz, RL = 100 Ohm)
VTM – 1.3 1.5
IH _ _ 100
Switching Resistance (Sine Wave, 50 to 60 Hz)
RS 0.1 _
_
Unit
V
V
mA
Dynamic Characteristics
Characteristic
Symbol
Min
Typ
Max
Unit
Critical Rate−of−Rise of On−State Current, Critical Damped Waveform Circuit
(IPK = 130 Amps, Pulse Width = 10 µsec)
dv/dt
_
120
− V/µs
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 08/30/17







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)