N-Channel MOSFET. AONS66917 Datasheet

AONS66917 MOSFET. Datasheet pdf. Equivalent

Part AONS66917
Description N-Channel MOSFET
Feature AONS66917 100V N-Channel AlphaSGT TM General Description • Trench Power AlphaSGTTM technology • Low.
Manufacture Alpha & Omega Semiconductors
Datasheet
Download AONS66917 Datasheet



AONS66917
AONS66917
100V N-Channel AlphaSGT TM
General Description
• Trench Power AlphaSGTTM technology
• Low RDS(ON)
• Low Gate Charge
• Optimized for fast-switching applications
• RoHS and Halogen-Free Compliant
Product Summary
VDS
ID (at VGS=10V)
RDS(ON) (at VGS=10V)
RDS(ON) (at VGS=4.5V)
100V
100A
< 3.5mΩ
< 5.0mΩ
Applications
• Synchronous Rectification in DC/DC and AC/DC
Converters
• Industrial and Motor Drive applications
100% UIS Tested
100% Rg Tested
Top View
DFN5x6
Bottom View
PIN1
Top View
PIN1
S1
S2
S3
G4
8D
7D
6D
5D
G
D
S
Orderable Part Number
AONS66917
Package Type
DFN 5x6
Form
Tape & Reel
Minimum Order Quantity
3000
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
Continuous Drain TC=25°C
Current G
TC=100°C
Pulsed Drain Current C
Continuous Drain
Current
Avalanche Current C
TA=25°C
TA=70°C
Avalanche energy L=0.1mH
Power Dissipation B
Power Dissipation A
TC=25°C
TC=100°C
TA=25°C
TA=70°C
C
VGS
ID
IDM
IDSM
IAS
EAS
PD
PDSM
Junction and Storage Temperature Range
TJ, TSTG
Maximum
100
±20
100
100
320
30.5
24.5
65
211
215
86
6.2
4.0
-55 to 150
Units
V
V
A
A
A
mJ
W
W
°C
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A
Maximum Junction-to-Ambient A D
Maximum Junction-to-Case
t ≤ 10s
Steady-State
Steady-State
Symbol
RqJA
RqJC
Typ
15
40
0.43
Max
20
50
0.58
Units
°C/W
°C/W
°C/W
Rev.1.0: January 2019
www.aosmd.com
Page 1 of 6



AONS66917
AONS66917
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol Parameter
Conditions
STATIC PARAMETERS
BVDSS Drain-Source Breakdown Voltage
IDSS Zero Gate Voltage Drain Current
ID=250mA, VGS=0V
VDS=100V, VGS=0V
IGSS
VGS(th)
RDS(ON)
gFS
VSD
IS
Gate-Body leakage current
Gate Threshold Voltage
VDS=0V, VGS=±20V
VDS=VGS, ID=250mA
VGS=10V, ID=20A
Static Drain-Source On-Resistance
VGS=4.5V, ID=20A
Forward Transconductance
VDS=5V, ID=20A
Diode Forward Voltage
IS=1A, VGS=0V
Maximum Body-Diode Continuous Current G
TJ=55°C
TJ=125°C
DYNAMIC PARAMETERS
Ciss Input Capacitance
Coss Output Capacitance
Crss Reverse Transfer Capacitance
Rg Gate resistance
VGS=0V, VDS=50V, f=1MHz
f=1MHz
SWITCHING PARAMETERS
Qg(10V)
Qg(4.5V)
Qgs
Qgd
tD(on)
tr
tD(off)
tf
trr
Qrr
Total Gate Charge
Total Gate Charge
Gate Source Charge
VGS=10V, VDS=50V, ID=20A
Gate Drain Charge
Turn-On DelayTime
Turn-On Rise Time
Turn-Off DelayTime
VGS=10V, VDS=50V, RL=2.5W,
RGEN=3W
Turn-Off Fall Time
Body Diode Reverse Recovery Time IF=20A, di/dt=500A/ms
Body Diode Reverse Recovery Charge IF=20A, di/dt=500A/ms
Min
100
1.7
0.3
Typ
2.2
2.9
4.8
3.9
100
0.68
5940
1475
24
0.6
80
35
18
11
16.5
6.5
46
12
43
208
Max Units
1
5
±100
2.8
3.5
5.8
5.0
1
100
V
μA
nA
V
mΩ
S
V
A
pF
pF
pF
1.0 Ω
115 nC
50 nC
nC
nC
ns
ns
ns
ns
ns
nC
A. The value of RqJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The Power
dissipation PDSM is based on R qJA t≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application depends on
the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation
limit for cases where additional heatsinking is used.
C. Single pulse width limited by junction temperature TJ(MAX)=150°C.
D. The RqJA is the sum of the thermal impedance from junction to case RqJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300ms pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. The maximum current rating is package limited.
H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C.
APPLICATIONS OR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT
ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE
PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev.1.0: January 2019
www.aosmd.com
Page 2 of 6





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)