DatasheetsPDF.com

SMD LED. APTD3216SURCK Datasheet

DatasheetsPDF.com

SMD LED. APTD3216SURCK Datasheet






APTD3216SURCK LED. Datasheet pdf. Equivalent




APTD3216SURCK LED. Datasheet pdf. Equivalent





Part

APTD3216SURCK

Description

SMD LED



Feature


APTD3216SURCK 3.2 x 1.6 mm SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Ele ctrostatic discharge and power surge co uld damage the LEDs It is recommended t o use a wrist band or anti-electrostati c glove when handling the LEDs All devi ces, equipments and machineries must be electrically grou.
Manufacture

Kingbright

Datasheet
Download APTD3216SURCK Datasheet


Kingbright APTD3216SURCK

APTD3216SURCK; nded FEATURES 3.2 mm x 1.6 mm SMD LED, 1 .8 mm thickness Low power consumption I deal for backlight and indicator Packag e: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant A PPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare application s ATTENTION Observe precautions for han dling electrostati.


Kingbright APTD3216SURCK

c discharge sensitive devices PACKAGE D IMENSIONS RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes : 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifi cations, characteristics and technical data described in the datasheet are sub ject to change without prior notice. 4. The device has a si.


Kingbright APTD3216SURCK

ngle mounting surface. The device must b e mounted according to the specificatio ns. SELECTION GUIDE Part Number APTD32 16SURCK Emitting Color (Material) ■ Hyper Red (AlGaInP) Lens Type Water Cl ear Notes: 1. θ1/2 is the angle from optical centerline where the luminous i ntensity is 1/2 of the optical peak val ue. 2. Luminous intensity / luminous fl ux: +/-15%. * Luminou.

Part

APTD3216SURCK

Description

SMD LED



Feature


APTD3216SURCK 3.2 x 1.6 mm SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Ele ctrostatic discharge and power surge co uld damage the LEDs It is recommended t o use a wrist band or anti-electrostati c glove when handling the LEDs All devi ces, equipments and machineries must be electrically grou.
Manufacture

Kingbright

Datasheet
Download APTD3216SURCK Datasheet




 APTD3216SURCK
APTD3216SURCK
3.2 x 1.6 mm SMD Chip LED Lamp
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
3.2 mm x 1.6 mm SMD LED, 1.8 mm thickness
Low power consumption
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Halogen-free
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
APTD3216SURCK
Emitting Color
(Material)
Hyper Red (AlGaInP)
Lens Type
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAC4694 / 1203002303 Rev No: V.18A Date: 11/29/2019
Iv (mcd) @ 20mA [2]
Min.
Typ.
700 1500
*300
*800
Viewing Angle [1]
2θ1/2
40°
Page 1 / 4




 APTD3216SURCK
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Emitting Color
Hyper Red
Hyper Red
Hyper Red
Hyper Red
APTD3216SURCK
Value
Typ.
Max.
645 -
630 -
28 -
35 -
Unit
nm
nm
nm
pF
Forward Voltage IF = 20mA
VF [2]
Hyper Red
1.95 2.5
V
Reverse Current (VR = 5V)
IR Hyper Red
Temperature Coefficient of λpeak
IF = 20mA, -10°C T 85°C
TCλpeak
Hyper Red
Temperature Coefficient of λdom
IF = 20mA, -10°C T 85°C
TCλdom
Hyper Red
Temperature Coefficient of VF
IF = 20mA, -10°C T 85°C
TCV Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
- 10
µA
0.14 - nm/°C
0.05 - nm/°C
-1.9 - mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
Rth JA [2]
Rth JS [2]
75
5
115
-40 to +85
-40 to +85
30
185
3000
680
550
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAC4694 / 1203002303 Rev No: V.18A Date: 11/29/2019
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 4




 APTD3216SURCK
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
80%
Ta = 25 °C
Red
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
APTD3216SURCK
SPATIAL DISTRIBUTION
Ta = 25 °C
-30°
-45°
-15°
-60°
15°
30°
45°
60°
-75° 75°
-90° 90°
1.0 0.5 0.0 0.5 1.0
Forward Current vs.
Forward Voltage
50
Ta = 25 °C
40
30
20
10
0
1.5 1.7 1.9 2.1 2.3 2.5
Forward voltage (V)
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
HYPER RED
Forward Current Derating Curve
50
40
1.5 30
1.0 20
0.5 10
0.0
0
10 20 30 40
Forward current (mA)
50
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAC4694 / 1203002303 Rev No: V.18A Date: 11/29/2019
Page 3 / 4



Recommended third-party APTD3216SURCK Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)