Photovoltaic Isolator. PVI5080NPbF Datasheet

PVI5080NPbF Isolator. Datasheet pdf. Equivalent

Part PVI5080NPbF
Description Photovoltaic Isolator
Feature General Description The PVI Series Photovoltaic Isolator generates an electrically isolated DC volta.
Manufacture Infineon
Datasheet
Download PVI5080NPbF Datasheet



PVI5080NPbF
General Description
The PVI Series Photovoltaic Isolator generates an
electrically isolated DC voltage upon receipt of a
DC input signal. It is capable of directly driving
gates of power MOSFETs or IGBTs. It utilizes a
monolithic integrated circuit photovoltaic generator
of novel construction as its output. The output is
controlled by radiation from a GaAlAs light emitting
diode (LED), which is optically isolated from the
photovoltaic generator.
The PVI Series is ideally suited for applications
requiring high-current and/or high-voltage switching
with optical isolation between the low-level driving
circuitry and high-energy or high-voltage load
circuits. It can be used for directly driving gates of
power MOSFETs. The dual-channel device allows
its outputs to drive independent discrete power
MOSFETs, or be connected in parallel or in series
to provide higher current drive for power MOSFETs
or higher voltage drive for IGBTs. The PVI Series
Photovoltaic isolators employ fast turn-off circuitry.
These PVI Series Photovoltaic Isolators are
packaged in 8-pin, molded DIP packages and
available with either thru-hole or surface-mount
(“gull-wing”) leads, in plastic shipping tubes.
Applications
 Load Distribution
 Industrial Controls
 Current-to-Voltage Conversion
 Custom Solid-State Relay
PVI5080NPbF, PVI5080NSPbF
Photovoltaic Isolator
Single Channel
5-10 Volt Output
Features
 Isolated Voltage Source
 Monolithic Construction
 Up to 8A Output
 Single Output
 Solid-State Reliability
Part Identification
PVI5080NPbF
PVI5080NSPbF
thru-hole
Surface-mount
(gull-wing)
1
2017-12-05



PVI5080NPbF
PVI5080NPbF/PVI5080NSPbF
Electrical Specifications (-40°C TA +85°C unless otherwise specified)
INPUT CHARACTERISTICS
Input Current Range (see figure 4)
Maximum Forward Voltage Drop @ 10mA, 25°C (see figure 5)
Maximum Reverse Voltage
Maximum Reverse Current @ -6.0V (DC), 25°C
Maximum Pulsed Input Current @ 25°C (see figure 6)
Limits
2.0 to 50
1.4
6.0
100
1.0
Units
mA (DC)
V (DC)
V (DC)
A (DC)
A (peak)
OUTPUT CHARACTERISTICS
Maximum Forward Voltage @ 10µA
Maximum Reverse Current @ -10VDC
Limits
8.0 per channel
10
Units
V(DC)
A (DC)
COUPLED CHARACTERISTICS
Minimum Open Circuit Voltage @ ILED = 10mA, 25°C, RL = >10M
(see figures 1 to 2)
Minimum Short Circuit Current @ ILED = 14mA, 25°C (see figures 1 to 2)
Maximum Capacitance (Input/Output)
Maximum Ton Time @ ILED=10mA, CLOAD=10pF (See Figure7)
RL > 20M
RL=10M
RL=4.7M
Maximum Toff Time @ ILED=10mA, CLOAD=10pF (See Figure7)
Limits
5.0
8.0
1.0
300
160
90
220
Units
V(DC)
A (DC)
pF
µS
µS
µS
µS
GENERAL CHARACTERISTICS
Minimum Dielectric Strength, Input-Output
Minimum Dielectric Strength, Output-to-Output
Minimum Insulation Resistance, Input-to-Output,
@TA=+25°C, 50%RH, 100VDC
Maximum Pin Soldering Temperature (10 seconds maximum)
Ambient Temperature Range:
Operating
Storage
Limits
4000
1200
1012
+260
-40 to 85
-40 to 125
Units
VRMS
VDC
°C
Infineon Technology does not recommend the use of this product in aerospace, avionics, military or life support
applications. Users of this Infineon Technology product in such applications assume all risks of such use and indemnify
Infineon Technology against all damages resulting from such use.
2
2017-12-05





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)