boost converter. ASL1507SHN Datasheet

ASL1507SHN converter. Datasheet pdf. Equivalent

Part ASL1507SHN
Description Single-phase and two-phase boost converter
Feature ASL1507SHN; ASL2507SHN Single-phase and two-phase boost converter with limp-home mode Rev. 1 — 26 .
Manufacture NXP
Datasheet
Download ASL1507SHN Datasheet




ASL1507SHN
ASL1507SHN; ASL2507SHN
Single-phase and two-phase boost converter with limp-home
mode
Rev. 1 — 26 April 2018
Product data sheet
1 Introduction
The ASL1507SHN is a highly integrated and flexible one-phase DC-to-DC boost
converter IC. The IC has one integrated gate driver which can drive one external
power metal-oxide-semiconductor field-effect transistor (MOSFET) and two integrated
proportional-integral (PI) controllers which can regulate the output voltage. It has a serial
peripheral interface (SPI) allowing control and diagnostic communication with an external
microcontroller.
The ASL2507SHN is a highly integrated and flexible two-phase DC-to-DC boost
converter IC. The IC has two integrated gate drivers which can drive two external power
metal-oxide-semiconductor field-effect transistors (MOSFETs) and two integrated
proportional-integral (PI) controllers which can regulate the output voltage on both
channels. It has a serial peripheral interface (SPI) allowing control and diagnostic
communication with an external microcontroller.
The ASL1507SHN; ASL2507SHN is designed primarily for use in automotive LED
lighting applications and provides an optimized supply voltage for ASLx416/17SHN
multichannel LED buck driver.
For simplicity, the data sheet states always 'gate drivers' and 'output voltages'. The
ASL1507SHN has only one gate driver and can only drive one output.
2 General description
The ASL1507SHN; ASL2507SHN has a fixed frequency peak current mode control with
parabolic/non‑linear slope compensation. It can operate with input voltages from 5.5 V to
40 V. It can be configured in boost topology via SPI for output voltages of up to 80 V, to
power the LED buck driver IC.
The ASL1507SHN is a single-phase boost converter with one output voltage. The
ASL2507SHN is a two-phase boost converter, which can have two independent outputs.
The ASL2507SHN is configurable via the SPI interface, as a single output converter with
either one phase or two phases, or two independent output voltages. In case the SPI
communication is lost in an abnormal situation, it switches to limp-home mode operation
ensuring system safety.
The ASL1507SHN; ASL2507SHN boost converter can drive up to two external low-side
N channel MOSFETs from an internally regulated adjustable supply. It can drive either
logic or standard level MOSFETs.
The integrated SPI interface also allows for programming the supply under/overvoltage
range, output voltage range, frequency spread spectrum, and DC-to-DC switching
frequency. It enables the optimization of external components and flexibility for
electromagnetic compatibility (EMC) design. This interface can be used also to provide
diagnostic information such as the device temperature, battery voltage, VGG voltage,
output voltage etc.



ASL1507SHN
NXP Semiconductors
ASL1507SHN; ASL2507SHN
Single-phase and two-phase boost converter with limp-home mode
The ASL1507SHN; ASL2507SHN integrates a non-volatile memory (NVM) to save
the default configuration internally. The configuration includes boost ramp-up, boost
voltage, frequency setting, error detection and etc. The default configuration is used in
limp‑home mode (SPI fail) and autonomous mode (no MCU). Additional features include
input undervoltage lockout and thermal shutdown when the junction temperature of the
ASL1507SHN; ASL2507SHN exceeds Tsd(otp).
The device is housed in a very small HVQFN32 package with an exposed thermal pad.
It is designed to meet the stringent requirements of automotive applications. It is fully
AEC-Q100 grade 1 qualified. It operates over the −40 °C to +125 °C ambient automotive
temperature range.
3 Features and benefits
AEC-Q100 grade 1 qualified
Limp-home mode ensuring system safety
Up to two flexible output voltages with 3 % accuracy programmable via SPI
Single phase on each output or double phase on one output
Fixed frequency operation via built-in oscillator from 125 kHz to 700 kHz
Slope compensation to track the frequency and output voltage
Programmable control loop compensation
Programmable spread spectrum functionality
Gate switching is halted when overvoltage on output is detected
Programmable gate voltage
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Output voltage monitoring
Supply voltage measurement
Control signal to enable the device low quiescent current < 5 μA when EN = 0
Read-back programmed voltage and frequency range via SPI
Junction temperature monitoring via SPI
Small package outline HVQFN32
Wide operating input voltage range from +5.5 V to +40 V
Operating ambient temperature range of −40 °C to +125 °C
4 Applications
Automotive LED lighting
Daytime running lights
Position or park light
Low beam
High beam
Turn indicator
Fog light
Cornering light
ASL1507_ASL2507
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 26 April 2018
© NXP B.V. 2018. All rights reserved.
2 / 56







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)