SMD LED. APH1608SURCK Datasheet

APH1608SURCK LED. Datasheet pdf. Equivalent

Part APH1608SURCK
Description SMD LED
Feature APH1608SURCK 1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source color devices are made.
Manufacture Kingbright
Datasheet
Download APH1608SURCK Datasheet




APH1608SURCK
APH1608SURCK
1.6 x 0.8 mm SMD Chip LED Lamp
DESCRIPTIONS
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.6 mm x 0.8 mm SMD LED, 0.65 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
APH1608SURCK
Emitting Color
(Material)
Hyper Red (AlGaInP)
Lens Type
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAB7256 / 1203001361 Rev No: V.11A Date: 03/26/2019
Iv (mcd) @ 20mA [2]
Min.
Typ.
120
230
*40
*80
Viewing Angle [1]
2θ1/2
120°
Page 1 / 4



APH1608SURCK
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Forward Voltage IF = 20mA
VF [2]
Hyper Red
Reverse Current (VR = 5V)
IR
Hyper Red
Temperature Coefficient of λpeak
IF = 20mA, -10°C T 85°C
Temperature Coefficient of λdom
IF = 20mA, -10°C T 85°C
Temperature Coefficient of VF
IF = 20mA, -10°C T 85°C
TCλpeak
TCλdom
TCV
Hyper Red
Hyper Red
Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
APH1608SURCK
Value
Typ.
Max.
645
-
630
-
28
-
35
-
1.95
2.5
-
10
0.14
-
0.05
-
-1.9
-
Unit
nm
nm
nm
pF
V
μA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
Rth JA [2]
Rth JS [2]
75
5
115
-40 to +85
-40 to +85
30
185
3000
465
325
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAB7256 / 1203001361 Rev No: V.11A Date: 03/26/2019
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 4







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)