SMD LED. AA3022YS-4.5SF Datasheet

AA3022YS-4.5SF LED. Datasheet pdf. Equivalent

Part AA3022YS-4.5SF
Description SMD LED
Feature 3.0x2.2mm SINGLE COLOR SURFACE MOUNT LED LAMP Part Number: AA3022YS-4.5SF Yellow Features z 3.0mm.
Manufacture Kingbright
Datasheet
Download AA3022YS-4.5SF Datasheet




AA3022YS-4.5SF
3.0x2.2mm SINGLE COLOR SURFACE MOUNT
LED LAMP
Part Number: AA3022YS-4.5SF
Yellow
Features
z 3.0mm x 2.2mm SMT LED, 1.5mm thickness.
z White reflector to maximize reflection of light.
z Ultra-compact type assures space saving.
z High efficiency & low power consumption.
z Package : 1500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0972
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 1 OF 6
ERP: 1201007049



AA3022YS-4.5SF
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAL0972
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: OCT/06/2010
DRAWN: Y.H.Wu
PAGE: 2 OF 6
ERP: 1201007049







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)