ROUND LED. WP7143SRC-D Datasheet

WP7143SRC-D LED. Datasheet pdf. Equivalent

Part WP7143SRC-D
Description ROUND LED
Feature Features z Outstanding material efficiency. z Reliable and rugged. z Low current capability. z RoHS .
Manufacture Kingbright
Datasheet
Download WP7143SRC-D Datasheet




WP7143SRC-D
Features
z Outstanding material efficiency.
z Reliable and rugged.
z Low current capability.
z RoHS compliant.
T-1 3/4 (5mm) ROUND LED LAMP
Part Number: WP7143SRC/D
Super Bright Red
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAE9408
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: JAN/19/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 6
ERP: 1101002055-03



WP7143SRC-D
Selection Guide
Part No.
Dice
Lens Type
WP7143SRC/D
Super Bright Red (GaAlAs)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
900 1500
*300 *600
Viewing
Angle [1]
2θ1/2
30°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Super Bright Red
655
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Red
640
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Super Bright Red
75
30
155
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAE9408
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: JAN/19/2015
DRAWN: L.Q.Xie
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101002055-03







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)