SMD LED. AA3535QB24Z1S Datasheet

AA3535QB24Z1S LED. Datasheet pdf. Equivalent

Part AA3535QB24Z1S
Description SMD LED
Feature PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICE.
Manufacture Kingbright
Datasheet
Download AA3535QB24Z1S Datasheet




AA3535QB24Z1S
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z White SMD package, silicone resin.
z Low thermal resistance.
z Compatible with IR-reflow processes.
z ESD protection.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant.
Package Dimensions
3.5x3.5 mm SMD CHIP LED LAMP
Part Number: AA3535QB24Z1S Blue
Description
The Blue source color devices are made with AlGaInN
Vertical Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
BLUE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ3811
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: MAY/07/2009
DRAWN: Y.F.Lu
PAGE: 1 OF 6
ERP: 1201004866



AA3535QB24Z1S
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAJ3811
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: MAY/07/2009
DRAWN: Y.F.Lu
PAGE: 2 OF 6
ERP: 1201004866







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)