Barrier Rectifier. MBR20200CTF Datasheet

MBR20200CTF Rectifier. Datasheet pdf. Equivalent


INCHANGE MBR20200CTF
Schottky Barrier Rectifier
FEATURES
·Guard -Ring for Stress Protection
·Low Forward Voltage
·High Operating Junction Temperature
·Low Power Loss/High Efficiency
·High surge capability
·100% avalanche tested
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
MECHANICAL CHARACTERISTICS
·Case: Epoxy, Molded
·Finish: All External Surfaces Corrosion Resistant and
Terminal Leads are Readily Solderable
·Lead Temperature for Soldering Purposes: 260Max.
for 10 Seconds
ABSOLUTE MAXIMUM RATINGS(Ta=25)
SYMBOL
PARAMETER
VALUE UNIT
VRRM
VRWM
VR
IF(AV)
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Rated VR) TC= 125
200
V
10
A
Peak Repetitive Forward Current
IFRM
(Rated VR,Square Wave,20kHz) TC= 90
20
A
Nonrepetitive Peak Surge Current
IFSM
(Surge applied at rated load conditions half-
150
A
wave, single phase, 60Hz)
TJ
Junction Temperature
150
Tstg
Storage Temperature Range
-65~150
dv/dt Voltage Rate of Change (Rated VR)
10,000 V/μs
MBR20200CTF
isc websitewww.iscsemi.com
1 isc & iscsemi is registered trademark


MBR20200CTF Datasheet
Recommendation MBR20200CTF Datasheet
Part MBR20200CTF
Description Schottky Barrier Rectifier
Feature MBR20200CTF; Schottky Barrier Rectifier FEATURES ·Guard -Ring for Stress Protection ·Low Forward Voltage ·High O.
Manufacture INCHANGE
Datasheet
Download MBR20200CTF Datasheet




INCHANGE MBR20200CTF
Schottky Barrier Rectifier
MBR20200CTF
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
Rth j-c
Thermal Resistance,Junction to Case
MAX
2.5
UNIT
/W
ELECTRICAL CHARACTERISTICS (Pulse Test: Pulse Width=300μs,Duty Cycle2%)
SYMBOL
PARAMETER
CONDITIONS
MAX
UNIT
VF
Maximum Instantaneous Forward Voltage IF= 10A ; TC= 25
IR
Maximum Instantaneous Reverse Current Rated DC Voltage, TC= 25
Rated DC Voltage, TC= 125
0.9
V
0.05
6.0
mA
Notice
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not designed
for use in equipment which require specialized quality and/or reliability, or in equipment which
could have applications in hazardous environments, aerospace industry, or medical field. Please
contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc websitewww.iscsemi.com
2 isc & iscsemi is registered trademark







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)