Operational Amplifiers. L358BA Datasheet

L358BA Amplifiers. Datasheet pdf. Equivalent

L358BA Datasheet
Recommendation L358BA Datasheet
Part L358BA
Description Industry-Standard Dual Operational Amplifiers
Feature L358BA; www.ti.com LM158, LM158A, LM258, LM258A LM358, LM358A, LM358B, LM358BA, LM2904L, LMM15289,0L4BM,1L5.
Manufacture etcTI
Datasheet
Download L358BA Datasheet




Texas Instruments L358BA
www.ti.com
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM358B, LM358BA, LM2904L, LMM15289,0L4BM,1L5M8A2,9L04MB2A58, ,LLMM2295084AV
LM358, LM358A, LM358B, LM358BA,SLLMOS2096084Y,LJMUN2E901947B6 ,LRMEV2I9SE0D4BFEAB,RLUMAR2Y902042V1
SLOS068Y – JUNE 1976 – REVISED FEBRUARY 2021
Industry-Standard Dual Operational Amplifiers
1 Features
3 Description
• Wide supply range of 3 V to 36 V (B version)
• Quiescent current: 300 µA per amplifier (B version,
typical)
• Unity-gain bandwidth of 1.2 MHz (B version)
• Common-mode input voltage range includes
ground, enabling direct sensing near ground
• Low input offset voltage of 3 mV at 25°C (A and B
versions, maximum)
• Internal RF and EMI filter (B version)
• On products compliant to MIL-PRF-38535, all
parameters are tested unless otherwise noted. On
all other products, production processing does not
necessarily include testing of all parameters.
2 Applications
Merchant network and server power supply units
Multi-function printers
Power supplies and mobile chargers
Motor control: AC induction, brushed DC,
brushless DC, high-voltage, low-voltage,
permanent magnet, and stepper motor
Desktop PC and motherboard
Indoor and outdoor air conditioners
Washers, dryers, and refrigerators
AC inverters, string inverters, central inverters, and
voltage frequency drives
Uninterruptible power supplies
Programmable logic controllers
Electronic point-of-sale systems
RG
RF
The LM358B and LM2904B devices are the next-
generation versions of the industry-standard
operational amplifiers (op amps) LM358 and LM2904,
which include two high-voltage (36-V) op amps.
These devices provide outstanding value for cost-
sensitive applications, with features including low
offset (300 µV, typical), common-mode input range to
ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit
design with enhanced features such as unity-gain
stability, lower offset voltage of 3 mV (maximum at
room temperature), and lower quiescent current of
300 µA per amplifier (typical). High ESD (2 kV, HBM)
and integrated EMI and RF filters enable the LM358B
and LM2904B devices to be used in the most rugged,
environmentally challenging applications.
The LM358B and LM2904B amplifiers are available in
micro-sized packaging, such as the SOT23-8 , as well
as industry standard packages, including SOIC,
TSSOP, and VSSOP.
Device Information
PART NUMBER(1)
PACKAGE BODY SIZE (NOM)
LM358B, LM2904B, LM358,
LM358A, LM2904,
SOIC (8)
LM2904V, LM258, LM258A
4.90 mm × 3.90 mm
LM358B, LM2904B, LM358,
LM358A, LM2904,
TSSOP (8)
LM2490V
3.00 mm × 4.40 mm
LM358B, LM2904B, LM358,
LM358A, LM2904,
VSSOP (8)
LM2904V, LM258, LM258A
3.00 mm × 3.00 mm
LM358B(2), LM2904B(2)
SOT-23 (8) 2.90 mm × 1.60 mm
LM358, LM2904
SO (8)
5.20 mm × 5.30 mm
LM358, LM2904, LM358A,
LM258, LM258A
PDIP (8)
9.81 mm × 6.35 mm
R1
VIN
LM158, LM158A
VOUT LM158, LM158A
CDIP (8)
9.60 mm × 6.67 mm
LCCC (20) 8.89 mm × 8.89 mm
(1) For all available packages, see the orderable addendum at
C1
the end of the data sheet.
f-3 dB =
1
2pR1C1
(2) Package is for preview only.
( ( VOUT
VIN
=
1
+
RF
RG
1
1 + sR1C1
Single-Pole, Low-Pass Filter
CopyrighAtn©I2M0P21OTReTxaAsNInTsNtruOmTeInCtsEInactotrhpeoreatnedd of this data sheet addresses availability, warranty, changes, use iSnusbamfeittyD-corcituicmael anpt pFleiceadtbioancsk,
1
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA. Product Folder Links: LM158 LM158A LM258 LM258A LM358 LM358A LM358B LM358BA LM2904 LM2904B
LM2904BA LM2904V



Texas Instruments L358BA
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM358B, LM358BA, LM2904, LM2904B, LM2904BA, LM2904V
SLOS068Y – JUNE 1976 – REVISED FEBRUARY 2021
www.ti.com
Table of Contents
1 Features............................................................................1
2 Applications..................................................................... 1
3 Description.......................................................................1
4 Revision History.............................................................. 2
5 Device Comparison Table...............................................4
6 Pin Configuration and Functions...................................5
7 Specifications.................................................................. 6
7.1 Absolute Maximum Ratings........................................ 6
7.2 ESD Ratings............................................................... 6
7.3 Recommended Operating Conditions.........................7
7.4 Thermal Information....................................................7
7.5 Electrical Characteristics: LM358B and LM358BA..... 8
7.6 Electrical Characteristics: LM2904B and
LM2904BA...................................................................10
7.7 Electrical Characteristics: LM358, LM358A.............. 12
7.8 Electrical Characteristics: LM2904, LM2904V.......... 13
7.9 Electrical Characteristics: LM158, LM158A.............. 14
7.10 Electrical Characteristics: LM258, LM258A............ 16
7.11 Typical Characteristics: LM358B and LM2904B..... 17
7.12 Typical Characteristics: LM158, LM158A,
LM258, LM258A, LM358, LM358A, LM2904, and
LM2904V..................................................................... 24
8 Parameter Measurement Information.......................... 26
9 Detailed Description......................................................27
9.1 Overview................................................................... 27
9.2 Functional Block Diagram: LM358B, LM358BA,
LM2904B, LM2904BA................................................. 27
9.3 Feature Description...................................................28
9.4 Device Functional Modes..........................................28
10 Application and Implementation................................ 29
10.1 Application Information........................................... 29
10.2 Typical Application.................................................. 29
11 Power Supply Recommendations..............................30
12 Layout...........................................................................30
12.1 Layout Guidelines................................................... 30
12.2 Layout Examples.................................................... 31
13 Device and Documentation Support..........................32
13.1 Related Links.......................................................... 32
13.2 Receiving Notification of Documentation Updates..32
13.3 Support Resources................................................. 32
13.4 Trademarks............................................................. 32
13.5 Electrostatic Discharge Caution..............................32
13.6 Glossary..................................................................32
14 Mechanical, Packaging, and Orderable
Information.................................................................... 33
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision X (June 2020) to Revision Y (February 2021)
Page
• Updated the numbering format for tables, figures, and cross-references throughout the document..................1
• Added SOT23-8 (DDF) package information throughout data sheet..................................................................1
• Deleted preview tag from LM358B and LM2904B VSSOP (8) package in Device Information table................. 1
• Added SOT23-8 (DDF) package information to Device Comparison Table .......................................................4
• Added SOT23-8 (DDF) package information to the Pin Configuration and Functions section........................... 5
• Added DDF (SOT-23) package to the Thermal Information table.......................................................................7
Changes from Revision W (October 2019) to Revision X (June 2020)
Page
• Added application links to Applications section.................................................................................................. 1
• Deleted preview tag from LM358B and LM2904B TSSOP (8) package in Device Information table ................ 1
Changes from Revision V (September 2018) to Revision W (October 2019)
Page
• Added specification in the Device Comparison Table ........................................................................................4
• Changed CDM ESD rating for LM358B and LM2904B in ESD Ratings ............................................................ 6
• Changed VS to V+ in Recommended Operating Conditions ..............................................................................7
• Changed Thermal Information for the LM158FK and LM158JG devices........................................................... 7
• Added Typical Characteristics section for the LM358B and LM2490B op amps.............................................. 17
• Added test circuit for THD+N and small-signal step response, G = –1 in the Parameter Measurement
Information section........................................................................................................................................... 26
• Changed the Functional Block Diagram .......................................................................................................... 27
2
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: LM158 LM158A LM258 LM258A LM358 LM358A LM358B LM358BA LM2904 LM2904B
LM2904BA LM2904V



Texas Instruments L358BA
www.ti.com
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM358B, LM358BA, LM2904, LM2904B, LM2904BA, LM2904V
SLOS068Y – JUNE 1976 – REVISED FEBRUARY 2021
• Deleted preview designator from LM358B and LM2904B in the Related Links section................................... 32
Changes from Revision U (January 2017) to Revision V (September 2018)
Page
• Changed the data sheet title ..............................................................................................................................1
• Changed first four items in the Features section ............................................................................................... 1
• Changed the first item in the Applications section and added four new items ...................................................1
• Changed voltage values in the first paragraph of the Description section..........................................................1
• Changed text in the second paragraph of the Description section..................................................................... 1
• Added devices LM358B and LM2904B to data sheet.........................................................................................1
• Changed the first three rows of the Device Information table and added a a cross-referenced note for
PREVIEW-status devices................................................................................................................................... 1
• Added Device Comparison table ....................................................................................................................... 4
• Added a table note to the Pin Functions table ................................................................................................... 5
• Changed "free-air temperature" to "ambient temperature" in the Absolute Maximum Ratings condition
statement............................................................................................................................................................ 6
• Changed all entries in the Absolute Maximum Ratings table except TJ and Tstg .............................................. 6
• Deleted lead temperature and case temperature from Absolute Maximum Ratings ......................................... 6
• Changed device listings and their voltage values in the ESD Ratings table ......................................................6
• Changed "free-air temperature" to "ambient temperature" in the Recommended Operating Conditions
condition statement ............................................................................................................................................7
• Changed table entries for all parameters in the Recommended Operating Conditions table.............................7
• Added rows to the Thermal Information table, and a table note regarding device-package combinations ....... 7
• Deleted the Operating Conditions table............................................................................................................16
• Added a condition statement to the Typical Characteristics section.................................................................24
• Changed specific voltages to a Recommended Operating Conditions reference............................................ 27
• Changed unity-gain bandwidth from 0.7 MHz for all devices to 1.2 MHz for B-version devices.......................28
• Changed slew rate from.3 V/µs for all devices to o.5 V/µs for B-version devices............................................ 28
• Changed the Section 9.3.3 section in multiple places throughout.................................................................... 28
• Changed VCC to VS in the Section 10.1 section ...............................................................................................29
• Subscripted the suffixes fro RI and RF .............................................................................................................29
• Changed Operational Amplifier Board Layout for Noninverting Configuration with an image that includes a
dual op amp...................................................................................................................................................... 31
• Added Preview designation to the LM358B and LM2904B devices in Table 13-1 ...........................................32
Changes from Revision T (April 2015) to Revision U ()
Page
• Changed data sheet title.....................................................................................................................................1
Changes from Revision S (January 2014) to Revision T (April 2015)
Page
• Added Applications section, ESD Ratings table, Feature Description section, Device Functional Modes,
Application and Implementation section, Power Supply Recommendations section, Layout section, Device
and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ........... 1
Changes from Revision R (July 2010) to Revision S (Jauary 2014)
Page
• Converted this data sheet from the QS format to DocZone using the PDF on the web..................................... 1
• Deleted Ordering Information table.....................................................................................................................1
• Updated Features to include Military Disclaimer................................................................................................ 1
• Added Typical Characteristics section.............................................................................................................. 24
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
3
Product Folder Links: LM158 LM158A LM258 LM258A LM358 LM358A LM358B LM358BA LM2904 LM2904B
LM2904BA LM2904V







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)