Ethernet Transceiver. 88E1116R Datasheet

88E1116R Transceiver. Datasheet pdf. Equivalent

88E1116R Datasheet
Recommendation 88E1116R Datasheet
Part 88E1116R
Description Gigabit Ethernet Transceiver
Feature 88E1116R; Marvell® Alaska® 88E1116R Gigabit Ethernet Transceiver Technical Product Brief Doc. No. MV-S106839-.
Manufacture Marvell
Datasheet
Download 88E1116R Datasheet





Marvell 88E1116R
Marvell® Alaska® 88E1116R
Gigabit Ethernet Transceiver
Technical Product Brief
Doc. No. MV-S106839-U0 Rev. C
December 1, 2020
Document Classification: Public
Cover



Marvell 88E1116R
Alaska® 88E1116R Technical Product Brief
Gigabit Ethernet Transceiver
THIS DOCUMENT AND THE INFORMATION FURNISHED IN THIS DOCUMENT ARE PROVIDED "AS IS" WITHOUT ANY
WARRANTY. MARVELL AND ITS AFFILIATES EXPRESSLY DISCLAIM AND MAKE NO WARRANTIES OR GUARANTEES,
WHETHER EXPRESS, ORAL, IMPLIED, STATUTORY, ARISING BY OPERATION OF LAW, OR AS A RESULT OF USAGE OF
TRADE, COURSE OF DEALING, OR COURSE OF PERFORMANCE, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.
This document, including any software or firmware referenced in this document, is owned by Marvell or Marvell's licensors, and is
protected by intellectual property laws. No license, express or implied, to any Marvell intellectual property rights is granted by this
document. The information furnished in this document is provided for reference purposes only for use with Marvell products. It is
the user's own responsibility to design or build products with this information. Marvell products are not authorized for use as critical
components in medical devices, military systems, life or critical support devices, or related systems. Marvell is not liable, in whole
or in part, and the user will indemnify and hold Marvell harmless for any claim, damage, or other liability related to any such use of
Marvell products.
Marvell assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights
of third parties that may result from its use. You may not use or facilitate the use of this document in connection with any
infringement or other legal analysis concerning the Marvell products disclosed herein. Marvell and the Marvell logo are registered
trademarks of Marvell or its affiliates. Please visit www.marvell.com for a complete list of Marvell trademarks and guidelines for use
of such trademarks. Other names and brands may be claimed as the property of others.
Copyright © 2020. Marvell and/or its affiliates. All rights reserved.
Doc. No. MV-S105539-00 Rev. --
Page 2
Document Classification: Proprietary Information
Copyright © 2020 Marvell
December 1, 2020, Advance



Marvell 88E1116R
Alaska® 88E1116R Technical Product Brief
Gigabit Ethernet Transceiver
OVERVIEW
The Alaska® 88E1116R Gigabit Ethernet Transceiver
is a physical layer device containing a single Gigabit
Ethernet transceiver. The transceiver implements the
Ethernet physical layer portion of the 1000BASE-T,
100BASE-TX, and 10BASE-T standards. It is manu-
factured using standard digital CMOS process and
contains all the active circuitry required to implement
the physical layer functions to transmit and receive
data on standard CAT 5 unshielded twisted pair.
The 88E1116R device supports the RGMII (Reduced
pin count GMII) for direct connection to a MAC/Switch
port.
The 88E1116R device integrates MDI interface termi-
nation resistors into the PHY. This resistor integration
simplifies board layout and reduces board cost by
reducing the number of external components. The new
Marvell® calibrated resistor scheme will achieve and
exceed the accuracy requirements of the IEEE 802.3
return loss specifications.
The 88E1116R device can run off a single 1.8V, 2.5V,
or 3.3V supply. Alternatively if the regulators are not
used then the 88E1116R device can run off 1.8V
and1.2V supply.
The 88E1116R device has two regulators to generate
all required voltages. The 88E1116R device supports
1.8V, 2.5V, and 3.3V HSTL/SSTL and 2.5V LVCMOS I/
O Standards
The 88E1116R device incorporates the Marvell® Vir-
tual Cable Tester® (VCT™) feature, which uses Time
Domain Reflectometry (TDR) technology for the
remote identification of potential cable malfunctions,
thus reducing equipment returns and service calls.
Using VCT, the Alaska 88E1116R device detects and
reports potential cabling issues such as pair swaps,
pair polarity and excessive pair skew. The device will
also detect cable opens, shorts or any impedance mis-
match in the cable and reporting accurately within one
meter the distance to the fault.
The 88E1116R device uses advanced mixed-signal
processing to perform equalization, echo and crosstalk
cancellation, data recovery, and error correction at a
gigabit per second data rate. The device achieves
robust performance in noisy environments with very
low power dissipation.
FEATURES
10/100/1000BASE-T IEEE 802.3 compliant
Four RGMII timing modes - This eliminates the
need for adding trace delays on the PCB
Supports LVCMOS, SSTL, and HSTL I/O Stan-
dards on the RGMII interface
Integrated MDI interface termination resistors that
eliminate twelve passive components
Energy Detect and Energy Detect+ low power
modes
Three loopback modes for diagnostics
“Downshift” mode for two-pair cable installations
Fully integrated digital adaptive equalizers, echo
cancellers, and crosstalk cancellers
Advanced digital baseline wander correction
Automatic MDI/MDIX crossover at all speeds of
operation
Automatic polarity correction
IEEE 802.3u compliant Auto-Negotiation
Software programmable LED modes including LED
testing
Supports IEEE 1149.1 JTAG
MDC/MDIO Management Interface
CRC checker, packet counter
Packet generation
Virtual Cable Tester (VCT)
Auto-Calibration for MAC Interface outputs
Coma Mode support
Requires a single 1.8V supply
I/O pads can be supplied with 1.8V, 2.5V, or 3.3V
Two regulators generate all required voltages.
Regulator can be supplied with 1.8V, 2.5V or 3.3V.
Commercial grade
64-Pin QFN package
10/100/1000 Mbps
Ethernet MAC
88E1116R
Device
MAC Interface
- RGMII
M
a
g
n
e
RJ-45
t
i
c
s
88E1116R Device used in Copper Application
Media Types:
- 10BASE-T
- 100BASE-TX
- 1000BASE-T
Copyright © 2020 Marvell
December 1, 2020, Advance
Document Classification: Proprietary Information
Doc. No. MV-S105539-00, Rev. --
Page 3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)