Line Interface. PEB4365 Datasheet

PEB4365 Interface. Datasheet pdf. Equivalent

PEB4365 Datasheet
Recommendation PEB4365 Datasheet
Part PEB4365
Description Dual Channel Subscriber Line Interface
Feature PEB4365; Preliminary Data Sheet, DS3, July 2003 DuSLIC Dual Channel Subscriber Line Interface Concept PEB 326.
Manufacture Infineon
Datasheet
Download PEB4365 Datasheet





Infineon PEB4365
Preliminary Data Sheet, DS3, July 2003
DuSLIC
Dual Channel Subscriber Line
Interface Concept
PEB 3264, Version 1.4
PEB 3265, Version 1.5
PEB 4264/-2, Version 1.1/1.2
PEB 4364, Version 1.1/1.2
PEB 4265/-2, Version 1.1/1.2
PEB 4365, Version 1.2
PEB 4266, Version 1.2
Wired
Communications
Never stop thinking.



Infineon PEB4365
ABM®, ACE®, AOP®, ARCOFI®, ASM®, ASP®, DigiTape®, DuSLIC®, EPIC®, ELIC®,
FALC®, GEMINAX®, IDEC®, INCA®, IOM®, IPAT®-2, ISAC®, ITAC®, IWE®, IWORX®,
MUSAC®, MuSLIC®, OCTAT®, OptiPort®, POTSWIRE®, QUAT®, QuadFALC®,
SCOUT®, SICAT®, SICOFI®, SIDEC®, SLICOFI®, SMINT®, SOCRATES®, VINETIC®,
10BaseV®, 10BaseVX® are registered trademarks of Infineon Technologies AG.
10BaseS™, EasyPort™, VDSLite™ are trademarks of Infineon Technologies AG.
Microsoft® is a registered trademark of Microsoft Corporation. Linux® is a registered
trademark of Linus Torvalds.
The information in this document is subject to change without notice.
Edition 2003-07-11
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
© Infineon Technologies AG 2003.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide
(www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.



Infineon PEB4365
Preliminary Data Sheet
Revision History:
2003-07-11
DS3
Previous Version: DS2
Page
Subjects (major changes since last revision)
Title
Product name corrected to Dual Channel Subscriber Line Interface
Concept
all
PEB 3265 version changed from 1.2 to 1.5
all
PEB 4264/-2 and PEB 4265/-2: version 1.2 added
all
PEB 4266 version changed from 1.1 to 1.2
all
PEB 3264 version changed from 1.2 to 1.4
all
Bit VRTLIM renamed to VTRLIM
all
Bit VRTLIM-M renamed to VTRLIM-M
all
New SLICs TSLIC-E and TSLIC-S added
all
New SLICOFI-2 (Version 1.5 only) package P-TQFP-64-1 added
all
New package P-VQFN-48-4 for SLIC-S/-S2, SLIC-E/-E2 and SLIC-P
added
all
Former chapter 2 "Pin Descriptions" removed. See updated device data
sheets.
Page 18 “Overview” on Page 18: Chapter reworked, tables for codec and SLIC
chips added.
Page 23 “Features” on Page 23: ITU-T Recommendation G.712 added
Page 25 “Logic Symbols” on Page 25: Logic symbol for SLIC-E/-E2 Version 1.2
added.
Page 32 “Block Diagram SLICOFI-2/-2S” on Page 32: block diagrams of SLIC
devices removed.
Page 33
Page 38
Figure 10 "Signal Paths – DC Feeding" on Page 33: CITA (CITB) renamed
to CITACA (CITACB).
Table 4 "DC Characteristics" on Page 38: VLIM changed from 50 V to 72
V.
Page 42
Page 50
Page 61
Figure 19 "Signal Paths – AC Transmission" on Page 42: CITA (CITB)
renamed to CITACA (CITACB).
“Internal Balanced Ringing via SLICs” on Page 50:
VDROP,RT renamed to VDROP,TR, VRT,RMS renamed to VTR,RMS, VRT0,RMS
renamed to VTR0,RMS
Figure 30 "Bellcore On-Hook Caller ID Physical Layer Transmission"
on Page 61: note added.
Page 61 “Caller ID Buffer Handling of SLICOFI-2” on Page 61: description for
listing item (9) changed
Page 64 “Non Linear Processor (NLP) in DuSLIC-E/-E2/-P” on Page 64 added.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)