DatasheetsPDF.com

LINE DRIVER. SN75150P Datasheet

DatasheetsPDF.com

LINE DRIVER. SN75150P Datasheet






SN75150P DRIVER. Datasheet pdf. Equivalent




SN75150P DRIVER. Datasheet pdf. Equivalent





Part

SN75150P

Description

DUAL LINE DRIVER



Feature


SN75150 DUAL LINE DRIVER D Meets or Exc eeds the Requirement of TIA/EIA-232-F a nd ITU Recommendation V.28 D Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between – 25 V and 25 V D 2-µs Maximum Transition Tim e Through the 3-V to – 3-V Transition Region Under Full 2500-pF Load D Input s Compatible With Most TTL Families D C ommon Strobe Input D In.
Manufacture

Texas Instruments

Datasheet
Download SN75150P Datasheet


Texas Instruments SN75150P

SN75150P; verting Output D Slew Rate Can Be Contro lled With an External Capacitor at the Output D Standard Supply Voltages . . . ± 12 V SLLS081C – JANUARY 1971 – REVISED JUNE 1999 D OR P PACKAGE (TOP VIEW) S1 1A 2 2A 3 GND 4 8 VCC+ 7 1Y 6 2Y 5 VCC – description The SN75150 is a monolithic dual line driver desig ned to satisfy the requirements of the standard interface betwee.


Texas Instruments SN75150P

n data-terminal equipment and data-commu nication equipment as defined by TIA/EI A-232-F. A rate of 20 kbits/s can be tr ansmitted with a full 2500-pF load. Oth er applications are in data-transmissio n systems using relatively short single lines, in level translators, and for d riving MOS devices. The logic input is compatible with most TTL families. Oper ation is from 12-V.


Texas Instruments SN75150P

and –12-V power supplies. The SN75150 is characterized for operation from 0 C to 70°C. logic symbol† logic di agram (positive logic) S1 EN 1A 2 2A 3 7 1Y 6 2Y † This symbol is in ac cordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. S1 2 1A 2A 3 ÎÎÎÎÎÎÎÎÎÎ 7 1Y 6 2Y Pleas e be aware that an important notice con cerning availability, standard warra.

Part

SN75150P

Description

DUAL LINE DRIVER



Feature


SN75150 DUAL LINE DRIVER D Meets or Exc eeds the Requirement of TIA/EIA-232-F a nd ITU Recommendation V.28 D Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between – 25 V and 25 V D 2-µs Maximum Transition Tim e Through the 3-V to – 3-V Transition Region Under Full 2500-pF Load D Input s Compatible With Most TTL Families D C ommon Strobe Input D In.
Manufacture

Texas Instruments

Datasheet
Download SN75150P Datasheet




 SN75150P
SN75150
DUAL LINE DRIVER
D Meets or Exceeds the Requirement of
TIA/EIA-232-F and ITU Recommendation
V.28
D Withstands Sustained Output Short Circuit
to Any Low-Impedance Voltage Between
– 25 V and 25 V
D 2-µs Maximum Transition Time Through the
3-V to – 3-V Transition Region Under Full
2500-pF Load
D Inputs Compatible With Most TTL Families
D Common Strobe Input
D Inverting Output
D Slew Rate Can Be Controlled With an
External Capacitor at the Output
D Standard Supply Voltages . . . ± 12 V
SLLS081C – JANUARY 1971 – REVISED JUNE 1999
D OR P PACKAGE
(TOP VIEW)
S1
1A 2
2A 3
GND 4
8 VCC+
7 1Y
6 2Y
5 VCC –
description
The SN75150 is a monolithic dual line driver designed to satisfy the requirements of the standard interface
between data-terminal equipment and data-communication equipment as defined by TIA/EIA-232-F. A rate of
20 kbits/s can be transmitted with a full 2500-pF load. Other applications are in data-transmission systems using
relatively short single lines, in level translators, and for driving MOS devices. The logic input is compatible with
most TTL families. Operation is from 12-V and –12-V power supplies.
The SN75150 is characterized for operation from 0°C to 70°C.
logic symbol
logic diagram (positive logic)
S1
EN
1A 2
2A 3
7 1Y
6 2Y
This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
S1
2
1A
2A 3
ÎÎÎÎÎÎÎÎÎÎ
7 1Y
6 2Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1999, Texas Instruments Incorporated
1




 SN75150P
SN75150
DUAL LINE DRIVER
SLLS081C – JANUARY 1971 – REVISED JUNE 1999
schematic (each line driver)
VCC +
To Other
Line Driver
Input A
11 k
Strobe S
To Other
Line Driver
7 k
15 k10 k
15 k
5 k
47
GND
To Other
Line Driver
4.5 k
15 k
Output Y
To Other
Line Driver
VCC
Resistor values shown are nominal.
10 k
5 k
1 k
47
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265




 SN75150P
SN75150
DUAL LINE DRIVER
SLLS081C – JANUARY 1971 – REVISED JUNE 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 15 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Applied output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 25 V
Package thermal impedance, θJA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . 197°C/W
P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network ground terminal.
2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability.
3. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace
length of zero.
recommended operating conditions
Supply voltage
High-level input voltage, VIH
Low-level input voltage, VIL
Driver output voltage, VO
Operating free-air temperature, TA
VCC+
VCC–
MIN
10.8
– 10.8
2
0
0
NOM MAX
12 13.2
– 12 – 13.2
5.5
0.8
± 15
70
UNIT
V
V
V
V
°C
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3



Recommended third-party SN75150P Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)