MSPS TxDAC+. AD9772A Datasheet


AD9772A TxDAC+. Datasheet pdf. Equivalent


Part Number

AD9772A

Description

14-Bit 160 MSPS TxDAC+

Manufacture

Analog Devices

Total Page 30 Pages
Datasheet
Download AD9772A Datasheet


AD9772A
FEATURES
Single 3.1 V to 3.5 V supply
14-bit DAC resolution and input data width
160 MSPS input data rate
67.5 MHz reconstruction pass band @ 160 MSPS
74 dBc SFDR @ 25 MHz
2× interpolation filter with high- or low-pass response
73 dB image rejection with 0.005 dB pass-band ripple
Zero-stuffing option for enhanced direct IF performance
Internal 2×/4× clock multiplier
250 mW power dissipation; 13 mW with power-down mode
48-lead LQFP package
APPLICATIONS
Communication transmit channel
W-CDMA base stations, multicarrier base stations,
direct IF synthesis, wideband cable systems
Instrumentation
GENERAL DESCRIPTION
The AD9772A is a single-supply, oversampling, 14-bit digital-
to-analog converter (DAC) optimized for baseband or IF
waveform reconstruction applications requiring exceptional
dynamic range. Manufactured on an advanced CMOS process,
it integrates a complete, low distortion 14-bit DAC with a 2×
digital interpolation filter and clock multiplier. The on-chip PLL
clock multiplier provides all the necessary clocks for the digital
filter and the 14-bit DAC. A flexible differential clock input
allows for a single-ended or differential clock driver for
optimum jitter performance.
For baseband applications, the 2× digital interpolation filter
provides a low-pass response, thus providing as much as a
threefold reduction in the complexity of the analog reconstruc-
tion filter. It does so by multiplying the input data rate by a
factor of 2 while suppressing the original upper in-band image
by more than 73 dB. For direct IF applications, the 2× digital
interpolation filter response can be reconfigured to select the
upper in-band image (that is, the high-pass response) while
suppressing the original baseband image. To increase the signal
level of the higher IF images and their pass-band flatness in
direct IF applications, the AD9772A also features a zero-stuffing
option in which the data following the 2× interpolation filter is
upsampled by a factor of 2 by inserting midscale data samples.
14-Bit, 160 MSPS TxDAC+
with 2× Interpolation Filter
AD9772A
FUNCTIONAL BLOCK DIAGRAM
CLKCOM CLKVDD MOD0 MOD1 RESET PLLLOCK DIV0 DIV1
CLK+
CLK–
AD9772A
CLOCK DISTRIBUTION
AND MODE SELECT
PLL CLOCK
MULTIPLIER
1×/2×
FILTER
CONTROL
MUX
CONTROL
2×/4×
PLLCOM
LPF
PLLVDD
DATA
INPUTS
(DB13 TO
DB0)
SLEEP
EDGE-
TRIGGERED
LATCHES
2× FIR
INTER-
POLATION
FILTER
ZERO-
STUFF
MUX
14-BIT DAC
1.2V REFERENCE
AND CONTROL AMP
IOUTA
IOUTB
REFIO
FSADJ
DCOM DVDD
ACOM AVDD
Figure 1.
REFLO
The AD9772A can reconstruct full-scale waveforms with band-
widths of up to 67.5 MHz while operating at an input data rate
of 160 MSPS. The 14-bit DAC provides differential current
outputs to support differential or single-ended applications.
A segmented current source architecture is combined with a
proprietary switching technique to reduce spurious components
and enhance dynamic performance. Matching between the two
current outputs ensures enhanced dynamic performance in a
differential output configuration. The differential current
outputs can be fed into a transformer or a differential op amp
topology to obtain a single-ended output voltage using an
appropriate resistive load.
The on-chip band gap reference and control amplifier are con-
figured for maximum accuracy and flexibility. The AD9772A
can be driven by the on-chip reference or by a variety of
external reference voltages. The full-scale current of the
AD9772A can be adjusted over a 2 mA to 20 mA range, thus
providing additional gain-ranging capabilities.
The AD9772A is available in a 48-lead LQFP package and is
specified for operation over the industrial temperature range of
–40°C to +85°C.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2008 Analog Devices, Inc. All rights reserved.

AD9772A
AD9772A* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
View a parametric search of comparable parts
Evaluation Kits
• AD9772A Evaluation Board
Documentation
Application Notes
• AN-137: A Digitally Programmable Gain and Attenuation
Amplifier Design
• AN-237: Choosing DACs for Direct Digital Synthesis
• AN-320A: CMOS Multiplying DACs and Op Amps
Combine to Build Programmable Gain Amplifier, Part 1
• AN-595: Understanding Pin Compatibility in the TxDAC®
Line of High Speed D/A Converters
• AN-642: Coupling a Single-Ended Clock Source to the
Differential Clock Input of Third-Generation TxDAC® and
TxDAC+® Products
• AN-808: Multicarrier CDMA2000 Feasibility
• AN-912: Driving a Center-Tapped Transformer with a
Balanced Current-Output DAC
• delete
Data Sheet
• AD9772A: 14-Bit, 160 MSPS TxDAC+® with 2 X
Interpolation Filter Data Sheet
Tools and Simulations
• AD9772A IBIS Models
Reference Materials
Informational
• Advantiv™ Advanced TV Solutions
Solutions Bulletins & Brochures
• Digital to Analog Converters ICs Solutions Bulletin
Technical Articles
• Soft Radio Runs into Hard Standards
Design Resources
• AD9772A Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
Discussions
View all AD9772A EngineerZone Discussions
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.


Features FEATURES Single 3.1 V to 3.5 V supply 14 -bit DAC resolution and input data widt h 160 MSPS input data rate 67.5 MHz rec onstruction pass band @ 160 MSPS 74 dBc SFDR @ 25 MHz 2× interpolation filter with high- or low-pass response 73 dB image rejection with 0.005 dB pass-band ripple Zero-stuffing option for enhanc ed direct IF performance Internal 2×/4 × clock multiplier 250 mW power dissip ation; 13 mW with power-down mode 48-le ad LQFP package APPLICATIONS Communicat ion transmit channel W-CDMA base statio ns, multicarrier base stations, direct IF synthesis, wideband cable systems In strumentation GENERAL DESCRIPTION The A D9772A is a single-supply, oversampling , 14-bit digitalto-analog converter (DA C) optimized for baseband or IF wavefor m reconstruction applications requiring exceptional dynamic range. Manufacture d on an advanced CMOS process, it integ rates a complete, low distortion 14-bit DAC with a 2× digital interpolation f ilter and clock multiplier. The on-chip PLL clock multiplier pr.
Keywords AD9772A, datasheet, pdf, Analog Devices, 14-Bit, 160, MSPS, TxDAC+, D9772A, 9772A, 772A, AD9772, AD977, AD97, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)