Analog Switch. HS-302RH Datasheet

HS-302RH Switch. Datasheet pdf. Equivalent

Part HS-302RH
Description Radiation Hardened CMOS Dual DPST Analog Switch
Feature N1cO-oN8TnO8tR8aR-EcINEtCoCTOuEOMrRMMTSMeEIcLENhNoDnrDEicwEDawDlFSwROu.EiRpnPptNeLorEArstWCilC.EcDeM.
Manufacture Intersil Corporation
Datasheet
Download HS-302RH Datasheet




HS-302RH
N1cO-oN8TnO8tR8aR-EcINEtCoCTOuEOMrRMMTSMeEIcLENhNoDnrDEicwEDawDlFSwROu.EiRpnPptNeLorEArstWCilC.EcDeMonEmEtSeN/IrtGsTacNt S
Radiation Hardened CMOS Dual DPST Analog Switch
HS-302RH, HS-302EH
Intersil’s Satellite Applications Flow™ (SAF) devices are fully
tested and guaranteed to 100kRAD Total Dose. These QML
Class T devices are processed to a standard flow intended to
meet the cost and shorter lead-time needs of large volume
satellite manufacturers, while maintaining a high level of
reliability.
The HS-302RH, HS-302EH analog switches are a monolithic
device fabricated using Radiation Hardened CMOS technology
and the Intersil dielectric isolation process for latch-up free
operation. Improved total dose hardness is obtained by layout
(thin oxide tabs extending to a channel stop) and processing
(hardened gate oxide). These switches offer low-resistance
switching performance for analog voltages up to the supply
rails. ON-resistance is low and stays reasonably constant over
the full range of operating voltage and current. ON-resistance
also stays reasonably constant when exposed to radiation,
being typically 30Ω pre-rad and 35Ω post 100kRAD(Si). These
devices provide break-before-make switching.
Specifications
Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed below must be used when ordering.
Detailed Electrical Specifications for the HS-302RH, HS-302EH
are contained in SMD# 5962-95812.
Functional Diagram
Features
• QML class T, Per MIL-PRF-38535
• Radiation performance
- Gamma dose () 1 x 105 RAD(Si)
• No latch-up, dielectrically isolated device islands
• Pin for pin compatible with Intersil HI-302 series analog
switches
• Analog signal range 15V
• Low leakage . . . . . . . . . . . . . . . . . . . . . 100nA (Max, Post Rad)
• Low RON . . . . . . . . . . . . . . . . . . . . . . . . . . 60Ω (Max, Post Rad)
• Low operating power . . . . . . . . . . . . . .100µA (Max, Post Rad)
Pin Configurations
HS1-302RH, HS1-302EH
(14 LD SBDIP), CDIP2-T14
TOP VIEW
NC 1
S3 2
D3 3
D1 4
S1 5
IN1 6
GND 7
14 V+
13 S4
12 D4
11 D2
10 S2
9 IN2
8 V-
IN N P
D
TRUTH TABLE
LOGIC
ALL SWITCHES
0 OFF
1 ON
NC
S3
D3
D1
S1
IN1
GND
HS9-302RH, HS9-302EH
(14 LD FLATPACK), CDFP3-F14
TOP VIEW
1 14
2 13
3 12
4 11
5 10
69
78
V+
S4
D4
D2
S2
IN2
V-
July 31, 2013
FN4603.3
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2002, 2013. All Rights Reserved
Intersil (and design) and Satellite Applications Flow™ (SAF) are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.



HS-302RH
HS-302RH, HS-302EH
Ordering Information
ORDERING SMD NUMBER
(Note 2)
PART NUMBER
TEMP. RANGE
(°C)
PACKAGE
(RoHS Compliant)
(Note 1)
PKG.
DWG. #
5962R9581201V9A
HS0-302RH-Q
-55 to +125
Die
5962R9581204V9A
HS0-302EH-Q
-55 to +125
Die
5962R9581201QCC
HS1-302RH-8
-55 to +125
14 Ld SBDIP
D14.3
5962R9581201VCC
HS1-302RH-Q
-55 to +125
14 Ld SBDIP
D14.3
5962R9581204VCC
HS1-302EH-Q
-55 to +125
14 Ld SBDIP
D14.3
5962R9581201QXC
HS9-302RH-8
-55 to +125
14 Ld Flatpack
K14.A
5962R9581201VXC
HS9-302RH-Q
-55 to +125
14 Ld Flatpack
K14.A
5962R9581204VXC
HS9-302EH-Q
-55 to +125
14 Ld Flatpack
K14.A
HS9-302RH/PROTO
HS9-302RH/PROTO
-55 to +125
14 Ld Flatpack
K14.A
HS0-302RH/SAMPLE
HS0-302RH/SAMPLE
-55 to +125
Die
NOTES:
1. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations.
2. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed in the
“Ordering Information” table on page 2 must be used when ordering..
2 FN4603.3
July 31, 2013







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)