DatasheetsPDF.com

2.5V Output. HLS30ZD Datasheet

DatasheetsPDF.com

2.5V Output. HLS30ZD Datasheet






HLS30ZD Output. Datasheet pdf. Equivalent




HLS30ZD Output. Datasheet pdf. Equivalent





Part

HLS30ZD

Description

HLS30 Series . 30A Half-Brick DC/DC Converter 48V Input 5.0V/ 3.3V/ 2.5V Output



Feature


HLS30 Series – 30A Half-Brick DC/DC Co nverter 48V Input 5.0V, 3.3V, 2.5V Outp ut Data Sheet Features • • • • • • • • • • Low profi le (-11mm) single board design 1500VDC input to output isolation meets basic i nsulation High efficiency - to 92% at f ull load Start-up into high capacitive load Low conducted and radiated EMI Out put overcurrent protection Output overvolt.
Manufacture

Power-One

Datasheet
Download HLS30ZD Datasheet


Power-One HLS30ZD

HLS30ZD; age protection Overtemperature protectio n Remote sense Set point accuracy ± 1% Remote on/off (primary referenced), po sitive or negative logic Output voltage trim adjust, positive or negative UL 1 950 Recognized, CSA 22.2 No. 950-95 cer tified, TUV IEC950 Applications • • • Distributed power architectur es Telecommunications equipment LAN/WAN applications Data processi.


Power-One HLS30ZD

ng applications • • Description Th e new HLS30 series of high-density, sin gle-output DC/DC converters, convert st andard telecom and datacom voltages int o isolated low voltage outputs. High ef ficiencies and a patent-pending board d esign create superior thermal transfer that enhances product reliability and e liminates the need for a heatsink. Sel ection Chart Model Inp.


Power-One HLS30ZD

ut voltage VDC 36-75 36-75 36-75 Input c urrent, max ADC 4.8 3.3 2.5 Output volt age VDC 5.0 3.3 2.5 Output rated curren t I rated ADC 30 30 30 Output Ripple/No ise, mV p-p 100 75 50 Typical Efficienc y @ I rated % 91 89 88 HLS30ZG HLS30ZE HLS30ZD This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipm.

Part

HLS30ZD

Description

HLS30 Series . 30A Half-Brick DC/DC Converter 48V Input 5.0V/ 3.3V/ 2.5V Output



Feature


HLS30 Series – 30A Half-Brick DC/DC Co nverter 48V Input 5.0V, 3.3V, 2.5V Outp ut Data Sheet Features • • • • • • • • • • Low profi le (-11mm) single board design 1500VDC input to output isolation meets basic i nsulation High efficiency - to 92% at f ull load Start-up into high capacitive load Low conducted and radiated EMI Out put overcurrent protection Output overvolt.
Manufacture

Power-One

Datasheet
Download HLS30ZD Datasheet




 HLS30ZD
HLS30 Series – 30A Half-Brick DC/DC Converter
48V Input
5.0V, 3.3V, 2.5V Output
Data Sheet
Features
Applications
Distributed power architectures
Telecommunications equipment
LAN/WAN applications
Data processing applications
Low profile (-11mm) single board design
1500VDC input to output isolation meets
basic insulation
High efficiency - to 92% at full load
Start-up into high capacitive load
Low conducted and radiated EMI
Output overcurrent protection
Output overvoltage protection
Overtemperature protection
Remote sense
Set point accuracy ± 1%
Remote on/off (primary referenced), positive
or negative logic
Output voltage trim adjust, positive or
negative
UL 1950 Recognized, CSA 22.2 No. 950-95
certified, TUV IEC950
Description
The new HLS30 series of high-density, single-output DC/DC converters, convert standard telecom and
datacom voltages into isolated low voltage outputs. High efficiencies and a patent-pending board design
create superior thermal transfer that enhances product reliability and eliminates the need for a heatsink.
Selection Chart
Model
Input
Input
Output Output rated
Output
Typical
voltage
VDC
current,
max
ADC
voltage
VDC
current I rated Ripple/Noise,
ADC
mV p-p
Efficiency
@ I rated %
HLS30ZG
36-75
4.8
5.0
30
100 91
HLS30ZE
36-75
3.3
3.3
30
75 89
HLS30ZD
36-75
2.5
2.5
30
50 88
This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment
should be followed.
Rev. 10/01
Page 1 of 8




 HLS30ZD
HLS30 Series – 30A Half-Brick DC/DC Converter
48V Input
5.0V, 3.3V, 2.5V Output
Data Sheet
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely effect
long-term reliability and cause permanent damage to the converter.
Parameter
Input voltage
Operating Temperature
Storage Temperature
ON/OFF Control Voltage
Conditions/Description
Continuous
Transient, 100mS
At 100% load
Referenced to -Vin
Min Max Units
75 VDC
100 VDC
-40 100
°C
-40 125
°C
50 VDC
Environmental and Mechanical Specifications
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Shock
Sinusoidal Vibration
Weight
Water Washing
MTBF
Conditions/Description
Halfsine wave, 3 axes
GR-63-Core, Section 5.A.2
Standard process
Per Bellcore TR-NWT-000332
Min Nom Max Units
50 g
1
1.6/46
Oz/g
Yes
1,780
kHrs
Isolation Specifications
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Insulation Safety Rating
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Conditions/Description
Min
1500
10
1100
Nom
Basic
Max Units
VDC
MOhm
pF
Input Specifications
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Input Voltage
Turn-On Input Voltage
Turn-Off Input Voltage
Turn-On Time
Input Reflected Ripple Current
Inrush Transient
Conditions/Description
Continuous
Ramping Up
Ramping Down
To Output Regulation Band
100% Resistive Load
Full Load, 12uH source
inductance
Vin=Vin.max
Min Nom
36 48
33
32
5
0.1
Max Units
75 VDC
VDC
VDC
mS
80 mA p-p
A2s
Rev. 10/01
Page 2 of 8




 HLS30ZD
HLS30 Series – 30A Half-Brick DC/DC Converter
48V Input
5.0V, 3.3V, 2.5V Output
Data Sheet
Output Specifications
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Conditions/Description
Min Nom Max Units
Output Voltage Setpoint Accuracy
Vin=Vin.nom, Full Load
-1
1 %Vout
Output Current*
3 30 ADC
Line Regulation
Vin.min to Vin.max, Iout.max
0.2 %Vout
Load Regulation
Vin=Vnom, Iout.min to
0.2 %Vout
Iout.max
Total output voltage regulation Over all input voltage, load,
-2
2 %Vout
and temperature conditions
Remote Sense Headroom
0.5 VDC
Dynamic Regulation
50-75% load step change
Peak Deviation
8 %Vout
Settling Time
to 1% error band
150 µS
Admissible Load Capacitance
Output Current Limit Threshold**
Iout.max, Nom Vin
Vout0.97Vout.nom
30,000
110
µF
140 %Iout
Switching Frequency
270 kHz
Overvoltage Protection,
Over all input voltage and
120
140 %Vout
Non Latching
load conditions
Trim Range
Iout.max, Vin=Vnom
90
110 %Vout
* At Iout<Iout.min, the output may contain low frequency component that exceeds ripple specifications.
** Overcurrent protection is non-latching with auto recovery.
Feature Specifications
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Shutdown (ON/OFF)
Negative Logic
- Converter ON
- Source Current
- Converter OFF
-Open Circuit Voltage
Positive Logic
- Converter ON
- Open Circuit Voltage
- Converter OFF
- Source Current
Overtemperature
Protection
Conditions/Description
On/Off signal is low – converter is ON
ON/OFF pin is connected to -Vin
ON/OFF pin is floating
On/Off signal is low –converter is OFF
ON/OFF pin is floating
ON/OFF pin is connected to -Vin
Average PCB Temp. – Shut down
- Recover
Min
-1.0
3.5
3.5
-1.0
Nom
0.85
2
3
90
Max Units
1.8 VDC
mADC
50 VDC
VDC
50 VDC
VDC
1.8 VDC
0.46 mADC
°C
Rev. 10/01
Page 3 of 8



Recommended third-party HLS30ZD Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)