STARTER SWITCH. Y1112 Datasheet

Y1112 Datasheet PDF, Equivalent


Part Number

Y1112

Description

THE FLUORACTOR Y1112 FLUORESCENT LAMP STARTER SWITCH

Manufacture

Power Innovations Limited

Total Page 4 Pages
PDF Download
Download Y1112 Datasheet PDF


Y1112 Datasheet
Copyright © 1997, Power Innovations Limited, UK
THE FLUORACTOR® Y1112
FLUORESCENT LAMP STARTER SWITCH
JUNE 1984 - REVISED SEPTEMBER 1997
q V(BR) 1200 to 1500 V
q IH > 175 mA
q IGT < 2 mA
description
This product is intended for use as a T8/T12
fluorescent tube starter switch on 200-240 V a.c.
supplies with tube sizes up to 5ft with leading
and lagging ballast circuits.
TO-220 PACKAGE
(TOP VIEW)
K1
A2
G3
Pin 2 is in electrical contact with the mounting base.
MDC1ACA
absolute maximum ratings at 25°C case temperature (unless otherwise noted)
RATING
Crest working off-state voltage (Full wave rectified 50 Hz a.c.)
Peak reverse gate voltage
On-state current
— continuous
— repetitive peak
— non-repetitive peak
Peak gate current
Average gate power
Operating case temperature range
Storage temperature range
Lead temperature during soldering 1.6 mm from the case for 10 seconds
SYMBOL
VDWM
VRGM
IT
ITRM
ITSM
IGRM
PG(av)
TC
Tstg
Tlead
VALUE
375
6
1.5
2
10
0.5
0.3
-5 to +85
-10 to +110
230
UNIT
V
V
A
A
W
°C
°C
°C
electrical characteristics at 25°C case temperature (unless otherwise noted)
PARAMETER
ID
VT
V(BR)
IH
IGTM
VGTM
Off-state current
On-state voltage
Clamping voltage
Holding current
Peak gate
trigger current
Peak gate
trigger voltage
TEST CONDITIONS
VD = VDWM
IT = 2 A
IBR = 5 mA
See application circuit
Tj = 65°C
tp < 200 µs, 2% duty cycle
VAA = 10 V
RL = 10
VAA = 10 V
RL = 10
MIN
1200
175
TYP
MAX
1
3.1
1500
2
UNIT
mA
V
V
mA
mA
3V
thermal characteristics
RθJA
RθJC
PARAMETER
Junction to free air thermal resistance
Junction to case thermal resistance
MIN TYP MAX UNIT
62.5 °C/W
3.5 °C/W
PRODUCT INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1

Y1112 Datasheet
THE FLUORACTOR® Y1112
FLUORESCENT LAMP STARTER SWITCH
JUNE 1984 - REVISED SEPTEMBER 1997
applications data
The conventional method of starting fluorescent tubes employs the use of an electromechanical canister. This
consists of a bimetallic strip which opens as it cools and in conjunction with the ballast inductor, provides the
tube striking voltage. However, the random nature of the pulsing results in repeated striking attempts and
degradation of both the tube and starter. The tube degradation is illustrated by its progressively blackening
ends and ultimately required tube replacement.
The Y1112, “Fluoractor®”, has been specifically introduced for use in electronic starters. This unique device
offers the lighting industry an opportunity to develop electronic starters small enough to be retrofit
replacements for the established electromechanical canisters. Its double thyristor structure with integrated
zener clamp diode and current mirror provides the technology for a starter with enhanced features such as
controlled flicker free start up, automatic tube shutdown at end of tube life and reduced degradation of tube
ends leading to extended life. The increased functionality, lifetime and reliability of these starters has led in
some cases to them being embodied in the ballast itself, a development not feasible with the old
electromechanical canisters.
150 k
D1 to 4 (see Note A)
4 x 1N4007
R2
68 k
R3
6.8 k
Figure 1. Two terminal starter circuit
NOTE 1: These rectifiers need to be voltage selected for VR V(BR)max + 150 V
Y1112
D5
D5 to 7
3 x 1N4001
D6
D7
FLSCCT1
PRODUCT INFORMATION
2


Features Datasheet pdf THE FLUORACTOR® Y1112 FLUORESCENT LAMP STARTER SWITCH Copyright © 1997, Power Innovations Limited, UK JUNE 1984 - RE VISED SEPTEMBER 1997 q q q V(BR) 1200 to 1500 V IH > 175 mA IGT < 2 mA K A G TO-220 PACKAGE (TOP VIEW) 1 2 3 des cription This product is intended for u se as a T8/T12 fluorescent tube starter switch on 200-240 V a.c. supplies with tube sizes up to 5ft with leading and lagging ballast circuits. Pin 2 is in electrical contact with the mounting ba se. MDC1ACA absolute maximum ratings a t 25°C case temperature (unless otherw ise noted) RATING Crest working off-sta te voltage (Full wave rectified 50 Hz a .c.) Peak reverse gate voltage On-state current — continuous — repetitive peak — non-repetitive peak Peak gate current Average gate power Operating ca se temperature range Storage temperatur e range Lead temperature during solderi ng 1.6 mm from the case for 10 seconds SYMBOL VDWM VRGM IT ITRM ITSM IGRM PG(a v) TC Tstg Tlead VALUE 375 6 1.5 2 10 0.5 0.3 -5 to +85 -10 to +110 230 .
Keywords Y1112, datasheet, pdf, Power Innovations Limited, THE, FLUORACTOR, Y1112, FLUORESCENT, LAMP, STARTER, SWITCH, 1112, 112, 12, Y111, Y11, Y1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)