OPERATIONAL AMPLIFIER. TS3V914 Datasheet


TS3V914 AMPLIFIER. Datasheet pdf. Equivalent


TS3V914


3V RAIL TO RAIL CMOS QUAD OPERATIONAL AMPLIFIER
TS3V914
3V RAIL TO RAIL CMOS QUAD OPERATIONAL AMPLIFIER

. . . . . . . .

DEDICATED TO 3.3V APPLICATIONS AND BATTERY-SUPPLIED (fully specified at VCC = 3V and 5V) RAIL TO RAIL INPUT AND OUTPUT VOLTAGE RANGES SINGLE (OR DUAL) SUPPLY OPERATION FROM 2.7V TO 16V EXTREMELY LOW INPUT BIAS CURRENT : 1pA TYP LOW INPUT OFFSET VOLTAGE : 5mV max. SPECIFIED FOR 600Ω AND 100Ω LOADS LOW SUPPLY CURRENT : 200µA/Ampli SPICE MACROMODEL INCLUDED IN THIS SPECIFICATION

N DIP14 (Plastic Package)

D SO14 (Plastic Micropackage)

ORDER CODES
Part Number TS3V914I/AI Temperature Range -40, +125 C
o

Package N • D •

PIN CONNECTIONS (top view)

DESCRIPTION The TS3V914 is a RAIL TO RAIL quad CMOS operational amplifier designed to operate with a single 3V supply voltage. The input voltage range Vicm includes the two supply rails VCC+ and VCC-. The output reaches : • VCC- +50mV VCC+ -50mV with RL = 10kΩ • VCC- +350mV VCC+ -350mV with RL = 600Ω This product offers a broad supply voltage operating range from 2.7V to 16V and a supply current of only 200µA/amp. (VCC = 3V). Source and sink output current capability is typically 40mA (at VCC = 3V), fixed by an internal limitation circuit. SGS-THOMSON is offering a dual op-amp with the same features : TS3V912.
October 1997

Output 1 Inverting Input 1 Non-inve rtin g Input 1 V CC + Non-inve rting Input 2 Invert ing Input 2 Output 2

1 2 3 4 5 6 7 + + + +

14 13 12 ...



TS3V914
TS3V914
3V RAIL TO RAIL
CMOS QUAD OPERATIONAL AMPLIFIER
. DEDICATED TO 3.3V APPLICATIONS AND
BATTERY-SUPPLIED (fully specified at
VCC = 3V and 5V)
. RAIL TO RAIL INPUT AND OUTPUT
VOLTAGE RANGES
. SINGLE (OR DUAL) SUPPLY OPERATION
FROM 2.7V TO 16V
. EXTREMELY LOW INPUT BIAS CURRENT :
1pA TYP
. LOW INPUT OFFSET VOLTAGE : 5mV max.
. SPECIFIED FOR 600AND 100LOADS
. LOW SUPPLY CURRENT : 200µA/Ampli
. SPICE MACROMODEL INCLUDED IN THIS
SPECIFICATION
N
DIP14
(Plastic Package)
D
SO14
(Plastic Micropackage)
ORDER CODES
Part Number
TS3V914I/AI
Temperature Range
-40, +125oC
Package
ND
••
PIN CONNECTIONS (top view)
DESCRIPTION
The TS3V914 is a RAIL TO RAIL quad CMOS
operational amplifier designed to operate with a
single 3V supply voltage.
The input voltage range Vicm includes the two
supply rails VCC+ and VCC-.
The output reaches :
VCC- +50mV VCC+ -50mV with RL = 10k
VCC- +350mV VCC+ -350mV with RL = 600
This product offers a broad supply voltage operat-
ing range from 2.7V to 16V and a supply current of
only 200µA/amp. (VCC = 3V).
Source and sink output current capability is typi-
cally 40mA (at VCC = 3V), fixed by an internal
limitation circuit.
SGS-THOMSON is offering a dual op-amp with the
same features : TS3V912.
Output 1 1
Inverting Input 1 2
Non-inve rtin g Input 1 3
VCC + 4
Non-inve rting Input 2 5
Invert ing Input 2 6
Output 2 7
-
+
+
-
October 1997
14 Output 4
- 13 Invertin g Input 4
+ 12 Non-inve rtin g Input 4
11 VCC -
+ 10 Non-inve rtin g Input 3
- 9 Invertin g Input 3
8 Output 3
1/12

TS3V914
TS3V914
SCHEMATIC DIAGRAM (1/4 TS3V914)
Non-inverting
Input
Inverting
Input
Inte rnal
Vre f
VCC
O utput
VCC
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Value
VCC Supply Voltage - (note 1)
18
Vid Differential Input Voltage - (note 2)
±18
Vi Input Voltage - (note 3)
-0.3 to 18
Iin Current on Inputs
±50
Io Current on Outputs
±130
Toper
Operating Free Air Temperature RangeI
-40 to +125
Tstg Storage Temperature
-65 to +150
Notes :
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC+ +0.3V.
OPERATING CONDITIONS
Symbol
VCC
Vicm
Parameter
Supply Voltage
Common Mode Input Voltage Range
Value
2.7 to 16
VCC- -0.2 to VCC++0.2
Unit
V
V
V
mA
mA
oC
oC
Unit
V
V
2/12




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)