DC/DC Converter. TEM2-0521 Datasheet

TEM2-0521 Converter. Datasheet pdf. Equivalent

Part TEM2-0521
Description DC/DC Converter
Feature DC/DC Converter TEM 2 Series Features 24–Pin DIP Plastic Package Tightly regulated Output Very low O.
Manufacture Traco Electronic AG
Datasheet
Download TEM2-0521 Datasheet

DC/DC Converter TEM 2 Series Features 24–Pin DIP Plastic Pac TEM2-0521 Datasheet
Recommendation Recommendation Datasheet TEM2-0521 Datasheet




TEM2-0521
Features
24–Pin DIP Plastic Package
Tightly regulated Output
Very low Output Noise
Short-Circuit Protection
Internal Filter
Industry Standard Pinout
2 Year Product Warranty
DC/DC Converter
TEM 2 Series
2 Watt
The TEM-2 series is a family of isolated dc/dc converters in a
DIP-24 package. They offer tight line/ load regulation and 500
VDC I/O-isolation. Standard features include an internal filter to
reduce reflected input ripple current and to guarantee low output
noise. This product series provides a cost effective solution by
many industrial or consumer electronics applications.
Models
Ordercode
TEM 2-0511
TEM 2-0512
TEM 2-0521
TEM 2-0522
TEM 2-1211
TEM 2-1212
TEM 2-1221
TEM 2-1222
TEM 2-2411
TEM 2-2412
TEM 2-2421
TEM 2-2422
Input voltage
5 VDC ± 10%
12 VDC ± 10%
24 VDC ± 10%
www.tracopower.com
Output voltage
5 VDC
12 VDC
±12 VDC
±15 VDC
5 VDC
12 VDC
±12 VDC
±15 VDC
5 VDC
12 VDC
±12 VDC
±15 VDC
Output current max.
400 mA
165 mA
± 80 mA
± 65 mA
400 mA
165 mA
± 80 mA
± 65 mA
400 mA
165 mA
± 80 mA
± 60 mA
Efficiency typ.
50 %
54 %
53 %
51 %
50 %
56 %
59 %
59 %
51 %
61 %
61 %
61 %
Page 1



TEM2-0521
DC/DC Converter
TEM 2 Series
2 Watt
Input Specifications
Input current (no load)
5 Vin models
12 Vin models
24 Vin models
Input current (full load)
5 Vin models
12 Vin models
24 Vin models
Surge voltage (1 sec. max.)
5 Vin models
12 Vin models
24 Vin models
Input filter
Output Specifications
Voltage set accuracy
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
– single output models
– dual output models balanced load
– dual output models un balanced load
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Output current limitation
Short circuit protection
Capacitive load
– single output models
– single output models
General Specifications
Temperature ranges – Operating
– Case
– Storage
5VDC output models:
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 E)
Isolation voltage
Input/Output
Isolation capacity
Input/Output
Isolation resistance Input/Output (500 VDC)
Switching frequency
80 mA typ.
40 mA typ.
20 mA typ.
770 mA typ.
300 mA typ.
145 mA typ.
7.5 VDC
15.0 VDC
30.0 VDC
Pi-Filter
±3%
± 0.3 % max.
± 0.5 % max.
± 1.0 % max.
± 3.0 % max.
50 mVpk-pk max.
± 0.02 % / °C
> 120% Iout max., constant current
indefinite
470 µF max.
220 µF max.
– 25 °C ... + 70 °C
– 25 °C ... + 60 °C
+ 95 °C max.
– 40 °C ... + 125 °C
95 % rel H max.
> 800’000 h @ + 25 °C
500 VDC
100 pF typ
> 1‘000 M Ohm
80 kHz typ.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)