DatasheetsPDF.com

Development specification. TFS183B Datasheet

DatasheetsPDF.com

Development specification. TFS183B Datasheet






TFS183B specification. Datasheet pdf. Equivalent




TFS183B specification. Datasheet pdf. Equivalent





Part

TFS183B

Description

Development specification



Feature


Filename: tfs183b.doc version 1.0 20.0 8.2003 VI TELEFILTER Measurement condi tion Ambient temperature: Input power l evel: Terminating impedances * Input: O utput: 22 0 t.b.d. t.b.d. Development specification TFS 183B 1/5 °C dBm Characteristics Remark: The reference l evel for the relative attenuation arel of TFS183B is the minimum of the pass b and attenuation ami.
Manufacture

ETC

Datasheet
Download TFS183B Datasheet


ETC TFS183B

TFS183B; n. This value is defined as the insertio n loss ae. The centre frequency fc is t he arithmetic mean value of the upper a nd lower frequencies at the 20 dB filte r attenuation level relative to the ins ertion loss ae. The given values for th e relative attenuation arel and the gro up delay ripple have to be reached at t he frequencies given below, even if the centre frequency .


ETC TFS183B

fc is shifted due to the temperature coe fficient of frequency TCf in the operat ing temperature range and due to a prod uction tolerance for the centre frequen cy fc. Data Insertion loss Nominal fre quency Centre frequency Passband ae = a min fN fc typ. value 183,6 MHz tolera nce / limit max. 9 dB 183,6 MHz fN ± max. 0,3 MHz 1,25 dB PB Amplitude var iation within PB Re.


ETC TFS183B

lative attenuation fN fN ± fN ± fN ± fN + fN ... fN ± 0,3 MHz ... fN ± 0,9 9 12 172,6 MHz MHz MHz MHz 0,3 MHz 0,6 15 MHz MHz MHz MHz MHz TCf **) 2 max. max. min. min. min. min. max. 1,25 dB 5 dB 33 38 45 45 dB dB dB dB ... fN 9 ... fN ± 12 ... fN + 183,6 ... fN 12 PB Phase linearity within Input pow er level 2,8 ° rms dBm max. + 10 Op erating temperature range .

Part

TFS183B

Description

Development specification



Feature


Filename: tfs183b.doc version 1.0 20.0 8.2003 VI TELEFILTER Measurement condi tion Ambient temperature: Input power l evel: Terminating impedances * Input: O utput: 22 0 t.b.d. t.b.d. Development specification TFS 183B 1/5 °C dBm Characteristics Remark: The reference l evel for the relative attenuation arel of TFS183B is the minimum of the pass b and attenuation ami.
Manufacture

ETC

Datasheet
Download TFS183B Datasheet




 TFS183B
Filename: tfs183b.doc
VI TELEFILTER
version 1.0
Development specification
TFS 183B
20.08.2003
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances *
Input:
Output:
22
0
t.b.d.
t.b.d.
°C
dBm
Characteristics
Remark:
The reference level for the relative attenuation arel of TFS183B is the minimum of the pass band attenuation amin. This value is defined as the insertion
loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 20 dB filter attenuation level relative to the insertion
loss ae. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below, even if the centre
frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the
centre frequency fc.
Data
typ. value
tolerance / limit
Insertion loss
Nominal frequency
Centre frequency
ae = amin
fN
fc
-
-
183,6
MHz
max. 9 dB
183,6 MHz
-
Passband
PB
Amplitude variation within PB
- fN ± 0,3 MHz
- max. 1,25 dB
Relative attenuation
fN ... fN ± 0,3 MHz
fN ± 0,3 MHz ... fN ± 0,615 MHz
fN ± 0,9 MHz ... fN ± 9
fN ± 9 MHz ... fN ± 12
fN + 12 MHz ... fN + 183,6
fN - 172,6 MHz ... fN - 12
MHz
MHz
MHz
MHz
Phase linearity within PB
- max. 1,25 dB
- max. 5 dB
- min. 33 dB
- min. 38 dB
- min. 45 dB
- min. 45 dB
- max. 2,8 ° rms
Input power level
- max. + 10 dBm
Operating temperature range
- - 30 °C ... + 85 °C
Operable temperature range
- - 40 °C ... + 85 °C
Storage temperature range
Temperature coefficient of frequency
Frequency inversion temperature
TCf **)
T0
-
- 0,036 ppm/K2
t.b.d.
- 40 °C ... + 85 °C
-
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) f(Hz) = TCf(ppm/K²) x (T-T0)² x fTo(MHz)
generated:
checked / approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS183B
Filename: tfs183b.doc
VI TELEFILTER
version 1.0
Development specification
Construction and pin connection
(all dimensions in mm)
9,3 Max.
876
9 TFS 183B 5
10
R34 4
123
Date code
TFS 183B
20.08.2003
2/5
1 Ground
2 Ground
3 Ground
4 Output
5 Output RF-Return
6 Ground
7 Ground
8 Ground
9 Input
10 Input RF-Return
2,54 ±0,12,54 ±0,1
60° 1 2 3 0,10
10 4
95
876
0,8
7,1
50 test circuit
t.b.d.
Date code:
N
P
R
...
Year + week
2001
2002
2003
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS183B
Filename: tfs183b.doc
VI TELEFILTER
version 1.0
Development specification
TFS 183B
20.08.2003
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W : 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
E : 1,75 ± 0,1
F : 7,5 ± 0,1
G (min) : 0,60
P2 :
P1 :
D1(m in) :
2 ± 0,1
8 ± 0,1
1,5
Ao : 5,30 ± 0,1
Bo : 9,70 ± 0,1
CT : 13,5 ± 0,1
CT
Reel (all dimensions in mm):
A : 330
W1 :
W 2 (max) :
N (min) :
C:
16,40 +2,0
22,4
50
13,0 + 0,5/-0.2
COVER TAPE
EMBOSSED CARRIER TAPE
D o Po
P2
Ao
D1
Bo
E
F
W
G
P1
W2
C
A
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.



Recommended third-party TFS183B Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)