DatasheetsPDF.com

TELEFILTER. TFS380G Datasheet

DatasheetsPDF.com

TELEFILTER. TFS380G Datasheet






TFS380G TELEFILTER. Datasheet pdf. Equivalent




TFS380G TELEFILTER. Datasheet pdf. Equivalent





Part

TFS380G

Description

TELEFILTER



Feature


Filename: tfs380g.doc version 1.1 10.0 9.2003 VI TELEFILTER Filter Specifica tion TFS 380G 1/5 Measurement condit ion Ambient temperature: 23 °C Input p ower level: 0 dBm Terminating impedance at fc *: input: 880 Ω II – 4,5 pF output: 850 Ω II – 3,7 pF Characte ristics Remark: The reference level for the relative attenuation arel of TFS 3 80G is the minimum of the p.
Manufacture

ETC

Datasheet
Download TFS380G Datasheet


ETC TFS380G

TFS380G; ass band attenuation amin. This value is defined as the insertion loss ae. The centre frequency fc is the arithmetic m ean value of the upper and lower freque ncies at the 1 dB filter attenuation le vel relative to the insertion loss ae. The given values for the relative atten uation arel and the group delay ripple have to be reached at the frequencies g iven below, even i.


ETC TFS380G

f the centre frequency fc is shifted due to the temperature coefficient of freq uency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data Ins ertion loss ae = amin typ. value 12,6 dB 380 MHz limit max. 14 380 dB MHz N ominal frequency fN Centre frequency fc Relative attenuation arel fN fN ± fN fN fN fN fN fN fN .


ETC TFS380G

fN ... fN ± 1,72 kHz ... fN ± kHz MHz MHz MHz MHz MHz MHz MHz ... fN ± ... f N ± ... fN ± ... fN ... fN ... fN ... fN + ... fN + 1,72 1,92 3 4 6 50 14,5 6 50 3 MHz MHz MHz MHz MHz MHz MHz MHz MHz GHz MHz MHz 0,5 dB 1,0 dB 8 28 41 6 0 53 45 43 45 65 dB dB dB dB dB dB dB d B ns max. max. min. min. min. min. min. min. min. min. 1 dB 1,5 dB 5 22 35 55 50 40 40 40 dB dB dB dB.

Part

TFS380G

Description

TELEFILTER



Feature


Filename: tfs380g.doc version 1.1 10.0 9.2003 VI TELEFILTER Filter Specifica tion TFS 380G 1/5 Measurement condit ion Ambient temperature: 23 °C Input p ower level: 0 dBm Terminating impedance at fc *: input: 880 Ω II – 4,5 pF output: 850 Ω II – 3,7 pF Characte ristics Remark: The reference level for the relative attenuation arel of TFS 3 80G is the minimum of the p.
Manufacture

ETC

Datasheet
Download TFS380G Datasheet




 TFS380G
Filename: tfs380g.doc
VI TELEFILTER
version 1.1
Filter Specification
TFS 380G
10.09.2003
1/5
Measurement condition
Ambient temperature:
23
Input power level:
0
Terminating impedance at fc *: input: 880
output: 850
°C
dBm
II – 4,5 pF
II – 3,7 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of TFS 380G is the minimum of the pass band attenuation amin. This value is defined as the
insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level
relative to the insertion loss ae. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies
given below, even if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and
due to a production tolerance for the centre frequency fc.
Data
typ. value
limit
Insertion loss
ae = amin
12,6 dB
max. 14 dB
Nominal frequency fN
Centre frequency fc
-
380 MHz
380 MHz
-
Relative attenuation arel
fN ... fN ±
fN ± 1,72 kHz ... fN ±
fN ±
fN ±
fN ±
fN -
fN -
fN -
fN +
fN +
2,5
3
4
375
50
14,5
6
50
kHz ... fN ±
MHz ... fN ±
MHz ... fN ±
MHz ... fN -
MHz ... fN -
MHz ... fN -
MHz ... fN +
MHz ... fN +
1,72
1,92
3
4
6
50
14,5
6
50
3
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
GHz
0,5 dB
1,0 dB
8 dB
28 dB
41 dB
60 dB
53 dB
45 dB
43 dB
45 dB
max. 1 dB
max. 1,5 dB
min. 5
min. 22
min. 35
min. 55
min. 50
min. 40
min. 40
min. 40
dB
dB
dB
dB
dB
dB
dB
dB
Group delay ripple in fN ± 1,92 MHz
65 ns
max. 100 ns
Phase linearity
in fN ± 1,92 MHz
0,8 deg rms
max. 3 deg rms
Input power level
- max. + 20 dBm
VSWR
within fN ± 1,92 MHz
Operating temperature range
16 dB
-
min. 12 dB
-10 °C...+ 85 °C
Storage temperature range
- - 35 °C.. + 85 °C
Temperature coefficient
TC **
- 0,04 ppm/K²
-
Frequency inversion temperature T0
45 °C
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team
**) f(Hz) = TCf(ppm/K) x (T-T0)² x fTo(MHz)
generated:
checked / approved:
TELEFILTER GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS380G
Filename: tfs380g.doc
VI TELEFILTER
version 1.1
Filter Specification
TFS 380G
10.09.2003
2/5
Construction and pin connection
(All dimensions in mm)
9,3 Max.
876
95
10 R37 4
123
Date code
2,54 ±0,12,54 ±0,1
60° 1 2 3 0,10
10 4
95
876
0,8
7,1
1 ground
2 ground
3 ground
4 output
5 output rf return
6 ground
7 ground
8 ground
9 input
10 input rf return
date code
N
P
R
...
year + week
2001
2002
2003
50 test circuit
Input
50 Ohm
L1 9
C1
SAW
4 L2
C2
1,2,3,5,6,7,8,10
Output
50 Ohm
TELEFILTER GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS380G
Filename: tfs380g.doc
VI TELEFILTER
version 1.1
Filter Specification
TFS 380G
10.09.2003
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
4;
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W : 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
E : 1,75 ± 0,1
F : 7,5 ± 0,1
G (min) : 0,60
P2 :
P1 :
D1(m in) :
2 ± 0,1
8 ± 0,1
1,5
Ao : 5,30 ± 0,1
Bo : 9,70 ± 0,1
CT : 13,5 ± 0,1
CT
COVER TAPE
EMBOSSED CARRIER TAPE
D o Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A : 330
W1 :
W 2 (max) :
N (min) :
C:
16,40 +2,0
22,4
50
13,0 + 0,5/-0.2
C
A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
TELEFILTER GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.



Recommended third-party TFS380G Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)