Four Lines. SMDA12C Datasheet

SMDA12C Lines. Datasheet pdf. Equivalent

SMDA12C Datasheet
Recommendation SMDA12C Datasheet
Part SMDA12C
Description Bidirectional TVS Array for Protection of Four Lines
Feature SMDA12C; SMDA05C THRU SMDA24C Bidirectional TVS Array for Protection of Four Lines PROTECTION PRODUCTS Descri.
Manufacture Semtech Corporation
Datasheet
Download SMDA12C Datasheet




Semtech Corporation SMDA12C
SMDA05C THRU SMDA24C
Bidirectional TVS Array
for Protection of Four Lines
PROTECTION PRODUCTS
Description
The SMDAxxC series of TVS arrays are designed to
provide bidirectional protection for sensitive electronics
from damage or latch-up due to ESD, lightning and
other voltage-induced transient events. Each device
will protect four data or I/O lines. They are available
with operating voltages of 5V, 12V, 15V and 24V.
TVS diodes are solid-state devices designed specifically
for transient suppression. They offer desirable charac-
teristics for board level protection including fast re-
sponse time, low operating and clamping voltage and
no device degradation. The low profile SO-8 package
allows the user to protect up to four independent lines
with one package. The SMDAxxC series is suitable
protection for sensitive semiconductors components
such as microprocessors, ASICs, transceivers, trans-
ducers, and CMOS memory.
Features
u Transient protection for data lines to
IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 12A (8/20µs)
u Bidirectional protection
u Small SO-8 package
u Protects four I/O lines
u Working voltages: 5V, 12V, 15V and 24V
u Low leakage current
u Low operating and clamping voltages
u Solid-state silicon avalanche technology
Mechanical Characteristics
u JEDEC SO-8 package
u Molding compound flammability rating: UL 94V-0
u Marking : Part number, date code, logo
u Packaging : Tube or Tape and Reel per EIA 481
The SMDAxxC series devices may be used to meet the
ESD immunity requirements of IEC 61000-4-2, level 4
for air and contact discharge.
Applications
u Data and I/O Lines
u Microprocessor based equipment
u Notebooks, Desktops, and Servers
u Instrumentation
u LAN/WAN equipment
u Peripherals
u Serial and Parallel Ports
Schematic & PIN Configuration
Revision 9/2000
18
27
36
45
SO-8 (Top View)
1 www.semtech.com



Semtech Corporation SMDA12C
SMDA05C THRU SMDA24C
PROTECTION PRODUCTS
Absolute Maximum Rating
Rating
Peak Pulse Power (tp = 8/20µs)
ESD Voltage (HBM per (IEC 61000-4-2)
Lead Soldering Temperature
Operating Temperature
Storage Temperature
Electrical Characteristics
SMDA05C
Parameter
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Maximum Peak Pulse Current
Junction Capacitance
Symbol
VRWM
VBR
IR
VC
VC
IPP
Cj
Symbol
Ppk
TL
TJ
TSTG
Value
300
>25
260 (10 sec.)
-55 to +125
-55 to +150
Units
Watts
kV
°C
°C
°C
Conditions
It = 1mA
VRWM = 5V, T=25°C
IPP = 1A, tp = 8/20µs
IPP = 5A, tp = 8/20µs
tp = 8/20µs
VR = 0V, f = 1MHz
Minimum
6
Typical
Maximum
5
20
9.8
11
17
350
Units
V
V
µA
V
V
A
pF
SMDA12C
Parameter
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Maximum Peak Pulse Current
Junction Capacitance
Symbol
VRWM
VBR
IR
VC
VC
IPP
Cj
Conditions
Minimum
It = 1mA
VRWM = 12V, T=25°C
IPP = 1A, tp = 8/20µs
IPP = 5A, tp = 8/20µs
tp = 8/20µs
VR = 0V, f = 1MHz
13.3
Typical
Maximum
12
1
19
24
12
120
Units
V
V
µA
V
V
A
pF
ã 2000 Semtech Corp.
2
www.semtech.com



Semtech Corporation SMDA12C
SMDA05C THRU SMDA24C
PROTECTION PRODUCTS
Electrical Characteristics (Continued)
SMDA15C
Parameter
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Maximum Peak Pulse Current
Junction Capacitance
Symbol
VRWM
VBR
IR
VC
VC
IPP
Cj
Conditions
Minimum
It = 1mA
VRWM = 15V, T=25°C
IPP = 1A, tp = 8/20µs
IPP = 5A, tp = 8/20µs
tp = 8/20µs
VR = 0V, f = 1MHz
16.7
Typical
Maximum
15
1
24
30
10
75
Units
V
V
µA
V
V
A
pF
SMDA24C
Parameter
Reverse Stand-Off Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Maximum Peak Pulse Current
Junction Capacitance
Symbol
VRWM
VBR
IR
VC
VC
IPP
Cj
Conditions
Minimum
It = 1mA
VRWM = 24V, T=25°C
IPP = 1A, tp = 8/20µs
IPP = 5A, tp = 8/20µs
tp = 8/20µs
VR = 0V, f = 1MHz
26.7
Typical
Maximum
24
1
43
55
5
50
Units
V
V
µA
V
V
A
pF
ã 2000 Semtech Corp.
3
www.semtech.com





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)