|
|
8-bit microcontroller. P87C591 Datasheet |
|
|
|
INTEGRATED CIRCUITS
DATA SHEET
P8xC591
Single-chip 8-bit microcontroller
with CAN controller
Preliminary Specification
File under Integrated Circuits, IC28
2000 Jul 26
|
Philips Semiconductors
Preliminary Specification
Single-chip 8-bit microcontroller with CAN controller
P8xC591
CONTENTS
1 FEATURES
1.1 80C51 Related Features of the 8xC591
1.2 CAN Related Features of the 8xC591
2 GENERAL DESCRIPTION
3 ORDERING INFORMATION
4 BLOCK DIAGRAM
5 FUNCTIONAL DIAGRAM
6 PINNING INFORMATION
6.1 Pinning diagram
6.2 Pin description
7 MEMORY ORGANIZATION
7.1 Program Memory
7.2 Addressing
7.3 Expanded Data RAM addressing
7.4 Dual DPTR
8 I/O FACILITIES
9 OSCILLATOR CHARACTERISTICS
10 RESET
11 LOW POWER MODES
11.1
Stop Clock Mode
11.2
Idle Mode
11.3
Power-down Mode
12 CAN, CONTROLLER AREA NETWORK
12.1
Features of the PeliCAN controller
12.2
PeliCAN structure
12.3 Communication between PeliCAN controller
and CPU
12.4 Register and Message Buffer description
12.5
CAN Registers
13 SERIAL I/O
14 SIO0 STANDARD SERIAL INTERFACE UART
14.1
14.2
14.3
14.4
14.5
Multiprocessor Communications
Serial Port Control Register
Baud Rate Generation
More about UART Modes
Enhanced UART
15 SIO1, I2C SERIAL IO
15.1
15.2
15.3
Modes of Operation
SIO1 Implementation and Operation
Software Examples of SIO1 Service Routines
16 TIMER 2
16.1
Features of Timer 2
17
18
18.1
18.2
18.3
19
20
20.1
20.2
20.3
20.4
20.5
21
21.1
21.2
21.3
21.4
22
22.1
23
24
25
25.1
26
26.1
26.2
27
28
28.1
29
30
WATCHDOG TIMER (T3)
PULSE WIDTH MODULATED OUTPUTS
Prescaler Frequency Control Register (PWMP)
Pulse Width Register 0 (PWM0)
Pulse Width Register 1 (PWM1)
PORT 1 OPERATION
ANALOG-TO-DIGITAL CONVERTER (ADC)
ADC features
ADC functional description
10-Bit Analog-to-Digital Conversion
10-Bit ADC Resolution and Analog Supply
Power Reduction Modes
INTERRUPTS
Interrupt Enable Registers
Interrupt Enable and Priority Registers
Interrupt priority
Interrupt Vectors
INSTRUCTION SET
Addressing Modes
LIMITING VALUES
DC CHARACTERISTICS
AC CHARACTERISTICS
Timing symbol definitions
EPROM CHARACTERISTICS
Program verification
Security bits
PACKAGE OUTLINES
SOLDERING
Plastic leaded-chip carriers/quad flat-packs
DEFINITIONS
LIFE SUPPORT APPLICATIONS
2000 Jul 26
2
|
Philips Semiconductors
Single-chip 8-bit microcontroller with CAN controller
Preliminary Specification
P8xC591
1 FEATURES
1.1 80C51 Related Features of the 8xC591
• Full static 80C51 Central Processing Unit available as
OTP, ROM and ROMless
• 16 Kbytes internal Program Memory expandable
externally to 64 Kbytes
• 512 bytes on-chip Data RAM expandable externally to
64 Kbytes
• Three 16-bit timers/counters T0, T1 (standard 80C51)
and additional T2 (capture & compare)
• 10-bit ADC with 6 multiplexed analog inputs with fast
8-bit ADC option
• Two 8-bit resolution, Pulse Width Modulated outputs
• 32 I/O port pins in the standard 80C51 pinout
• I2C-bus serial I/O port with byte oriented master and
slave functions
• On-chip Watchdog Timer T3
• Extended temperature range: −40 to +85°C
• Accelerated (prescaler 1:1) instruction cycle time
500 ns @ 12 MHz
• Operation voltage range: 5 V ± 5%
• Security bits:
– ROM version has 2 bits
– OTP/EPROM version has 3 bits
• 32 bytes Encryption array
• 4 level priority interrupt, 15 interrupt sources
• Full-duplex enhanced UART with programmable
Baudrate Generator
• Power Control Modes:
– Clock can be stopped and resumed
– Idle Mode
– Power-down Mode
• ADC active in Idle Mode
• Second DPTR register
• ALE inhibit for EMI reduction
• Programmable I/O port pins (pseudo bi-directional,
push-pull, high impedance, open drain)
• Wake-up from Power-down by external interrupts
• Software reset bit (AUXR1.5)
• Low active reset pin
• Power-on detect reset
• Once mode
1.2 CAN Related Features of the 8xC591
• CAN 2.0B active controller, supporting 11-bit Standard
and 29-bit Extended indentifiers
• 1 Mbit/s CAN bus speed with 8 MHz clock achievable
• 64 byte receive FIFO (can capture sequential Data
Frames from the same source as required by the
Transport Layer of higher protocols such as DeviceNet,
CANopen and OSEK)
• 13 byte transmit buffer
• Enhanced PeliCAN core (from the SJA1000 stand-alone
CAN2.0B controller)
1.2.1 PELICAN FEATURES
• Four independently configurable Screeners
(Acceptance Filters)
• Each Screener has two 32-bit specifies:
– 32-bit Match and
– 32-bit Mask
• 32-bits of Mask per Screener allows unique Group
addressing per Screener
• Higher layer protocols especially supported in Standard
CAN format with:
– Up to four, 11-bit ID Screeners that also Screen the
two (2) Data Bytes
– i.e., Data Frames are Screened by the CAN ID and by
Data Byte content
• Up to eight, 11-bit ID Screeners half of which also
Screen the first Data Byte
• All Screeners are changeable “on the fly”
• Listen Only Mode, Self Test Mode
• Error Code Capture, Arbitration Lost Capture, readable
Error Counters
2000 Jul 26
3
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |