TOSHIBA BIPOLAR DIGITAL IC SILICON MONOLITHIC
THREE−CHANNEL SMALL−SIGNAL IGBT GATE DRIVER
The TD62930P and TD62930F are drivers using 5 V−signal input
to output the signals required to drive IGBT gates.
TD62930P / F is the most suitable for low−side drive of a
miniature IGBT to use for inverter for the household electric
The outputs are separated into high−side and low−side outputs.
This separation simplifies the IGBT gate on / off timing control.
Two output signals are assigned for one input signal.
The high−side output is high−level for high−level input, and high
impedance for low−level input. The low−side output is high
impedance for high−level input, and low−level for low−level
Power supply voltage (absolute maximum rating)
High−voltage block power supply voltage VCC = 30 V
Low−voltage block power supply voltage VDD = 7 V
Output current (absolute maximum rating)
High−side peak current IOUT = −0.4 A (max)
Low−side peak current IOUT = 0.4 A (max)
Input−output response speed tpHL, tpLH ≤ 1 µs (max)
Package : DIP16 / SSOP16 (1.00 mm pitch)
DIP16-P-300-2.54A: 1.11 g (typ.)
SSOP16-P-225-1.00A: 0.14 g (typ.)