(PDF) IC11S-BUR-PEJL Datasheet PDF | Hirose





IC11S-BUR-PEJL Datasheet PDF

Part Number IC11S-BUR-PEJL
Description Single Slot SMT Connectors For Card-Bus Based PC Cards
Manufacture Hirose
Total Page 30 Pages
PDF Download Download IC11S-BUR-PEJL Datasheet PDF

Features: Datasheet pdf Single Slot SMT Connectors For Card-Bus Based PC Cards IC11S Series PC Card Sta ndard Compliant Reduced height : 5.6mm high sFeatures 1. PC Card Standard com pliant: • Grounding is required to me et the high speed signal requrements of the PC card standard. Grounding reliab ility is achieved with a grounding plat e and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered. Terminals for ground clipping are pr ovided. Wide variety of options (1)Boa rd Mounting ➀Standard type ➁Reverse type (2)Types of eject button ➀Rigid button ➁Foldering button ➂Pop-up b utton (3)Position of eject buttons ➀R ight ➁Left (4)Standoffs ➀None ➁2. 2mm 2. Space saving Smaller size reduc es occupied area on PC boards as compar ed to previous products. 3. Reduced He ight: Connector height is minimized to 5.6mm, making possible thinner product designs. 4. Eject mechanism with high- level functionality Hirose Electric's o riginal ejection mechanism provides an higher degree of card ejection over existing pro.

Keywords: IC11S-BUR-PEJL, datasheet, pdf, Hirose, Single, Slot, SMT, Connectors, For, Card-Bus, Based, PC, Cards, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

IC11S-BUR-PEJL datasheet
Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series
PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
Grounding is required to meet the high speed signal
requrements of the PC card standard. Grounding reliability is
achieved with a grounding plate and 8 grounding contacts.
Type 1, type 2 and type 3 cards are covered.
Terminals for ground clipping are provided.
2. Space saving
Smaller size reduces occupied area on PC boards as
compared to previous products.
3. Reduced Height:
Connector height is minimized to 5.6mm, making possible
thinner product designs.
4. Eject mechanism with high-level functionality
Hirose Electric's original ejection mechanism provides an
higher degree of card ejection over existing products. This
improves the operational qualities of card removal. (Patents
pending)
5. Wide Variety of Options Available
Standard type mounts to the top of the PC board and reverse
type mounts on the underside of the board
Three types of eject buttons; rigid, flexible and POP-UP.All
types can be installed on the right or left side of the ejector.
Available with standoff to utilize space under the connector for
mounting other parts.
6. Light-weight
Weight of 12.7g for normal button type helps achieve the
reduced weight required in today’s products.
Wide variety of options
(1)Board Mounting
Standard type
Reverse type
(2)Types of eject button
Rigid button
Foldering button
Pop-up button
(3)Position of eject buttons
Right
Left
(4)Standoffs
None
2.2mm
A2

IC11S-BUR-PEJL datasheet
sProduct Specifications
Ratings
Current rating
Voltage rating
0.5A
125V AC
Operating temperature -55ç to +85ç(Note.1) Storage temperature -40ç to +70ç(Note.2)
Operating humidity
Relativehumidity 95%
(With no dew-fall)
max.
Storage
humidity
40% to 70%(Note.2)
Item Specification
1.Insulation resistance 1000M ohms min.
2.Withstanding voltage No flashover or insulation breakdown.
3.Contact resistance 60m ohms max. (initial value)
4.Vibration
No electrical discontinuity of 100ns or more
500V DC
500V AC
1mA
Conditions
Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or
acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.
5.Humidity (Steady state) Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6.Temperature cycle Insulation resistance: 100M ohms min.
7.Durability
Variations from initial contact resistance: 20m
(Insertion/withdrawal) ohms max.
8.Resistance to
Soldering heat
No deformation of components affecting
performance.
(-55ç:30min./+5ç to 35ç:MAX 5min/85ç:30min/+5
-35ç:MAX 5min.) 5 cycles
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterial
SMT unit
Insulator
Parts
Contact
Card connected section
Ground plate
Eject metal fittings
Guide unit
Item
Guide plate
Push rod
Rigid button type resin section
Foldering
button type
Eject Button
resin section
spring
spring pin
resin section
frame metal
POP-UP type
spring
pin
Nut
Material
PPS
Brass
Phosphor bronze
Stainless steel
Material
Stainless steel
Stainless steel
PBT
PBT
Stainless steel
Stainless steel
PBT
Stainless steel
Steel
Brass
Steel
Finish
Black
Contact section: gold plating
Lead section: solder plating
Contact section: gold plating
Lead section: solder plating
----------
Finish
----------
----------
Color : Black
Color : Black
----------
----------
Color : Black
----------
----------
Nickel plating
----------
Remarks
UL94V-0
----------
----------
----------
Remarks
----------
----------
UL94V-0
UL94V-0
----------
----------
UL94V-0
----------
----------
----------
M2X0.4
A3





Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)