150mA / Low-Dropout Linear Regulator with Power-OK Output
|Total Page||8 Pages|
|Features||Datasheet pdf 19-1576; Rev 0; 10/99 150mA, Low-Dropou t Linear Regulator with Power-OK Output General Description The MAX8885 low-dr opout (LDO) linear regulator operates f rom a +2.5V to +6.5V input voltage rang e and delivers up to 150mA. It uses a P -channel MOSFET pass transistor to allo w a low 85µA supply current—which is independent of the load—as well as L DO voltage. The MAX8885 is optimized to operate with low-cost, high-ESR output capacitors such as small case-size tan talum capacitors. It is ideal for cost- sensitive portable equipment such as PC S and cellular phones. For a pin-compat ible, functionally equivalent device fo r use with a low-ESR, ceramic output ca pacitor, refer to the MAX8875 data sheet..|
|Keywords||MAX8885, datasheet, pdf, Maxim, 150mA, /, Low-Dropout, Linear, Regulator, with, Power-OK, Output, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|
19-1576; Rev 0; 10/99
150mA, Low-Dropout Linear Regulator
with Power-OK Output
The MAX8885 low-dropout (LDO) linear regulator operates
from a +2.5V to +6.5V input voltage range and delivers up
to 150mA. It uses a P-channel MOSFET pass transistor to
allow a low 85µA supply current—which is independent of
the load—as well as LDO voltage. The MAX8885 is opti-
mized to operate with low-cost, high-ESR output capaci-
tors such as small case-size tantalum capacitors. It is ideal
for cost-sensitive portable equipment such as PCS and
cellular phones. For a pin-compatible, functionally equiva-
lent device for use with a low-ESR, ceramic output capaci-
tor, refer to the MAX8875 data sheet.
The MAX8885 features a power-OK output that indicates
when the output is out of regulation, and is available in
preset output voltage versions of 5.0V, 3.3V, 3.0V, 2.7V,
and 2.5V. Other features include 1µA (max) shutdown cur-
rent, short-circuit protection, thermal shutdown protection,
and reverse-battery protection. The MAX8885 is available
in a miniature 5-pin SOT23 package.
Output Voltage Selector Guide
Note: Other output voltages between 2.5V and 5.0V are avail-
able in 100mV increments—contact factory for information.
Minimum order quantity is 25,000 units.
o Optimized for Low-Cost Tantalum Capacitors
o Pin Compatible with MIC5206
o Undervoltage Power-OK Output
o Preset Output Voltages (±1% accuracy)
o Guaranteed 150mA Output Current
o 85µA No-Load Supply Current
o Low 110mV Dropout at 100mA Load (165mV at
o Thermal-Overload and Short-Circuit Protection
o Reverse-Battery Protection
o 60dB PSRR at 100Hz
o 1µA max Shutdown Current
MAX8885EUK25 -40°C to +85°C
MAX8885EUK27 -40°C to +85°C
MAX8885EUK30 -40°C to +85°C
MAX8885EUK33 -40°C to +85°C
MAX8885EUK50 -40°C to +85°C
Note: See Output Voltage Selector Guide for more information.
Typical Operating Circuit
+2.5V TO +6.5V
2.5V TO 5.0V
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.