40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators
|Total Page||15 Pages|
|Features||Datasheet pdf MAX9140/MAX9141/ MAX9142/MAX9144 40ns, Low-Power, 3V/5V, Rail-to-Rail Single-S upply Comparators General Description The MAX9140/MAX9141 are single and the MAX9142/ MAX9144 are dual/quad high-spe ed comparators optimized for systems po wered from a 3V or 5V supply. The MAX91 41 features latch enable and device shu tdown. These devices combine high speed , low power, and rail-to-rail inputs. P ropagation delay is 40ns, while supply current is only 150μA per comparator. The input common-mode range of the devi ces extends beyond both power-supply ra ils. The outputs pull to within 0.3V of either supply rail without external pu llup circuitry, making these devices id eal for interface with both CMOS and .|
|Keywords||MAX9141, datasheet, pdf, Maxim, 40ns, /, Low-Power, /, 3V/5V, /, Rail-to-Rail, Single-Supply, Comparators, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|
40ns, Low-Power, 3V/5V, Rail-to-Rail
The MAX9140/MAX9141 are single and the MAX9142/
MAX9144 are dual/quad high-speed comparators optimized
for systems powered from a 3V or 5V supply. The MAX9141
features latch enable and device shutdown. These devices
combine high speed, low power, and rail-to-rail inputs.
Propagation delay is 40ns, while supply current is only
150μA per comparator.
The input common-mode range of the devices extends beyond
both power-supply rails. The outputs pull to within 0.3V of
either supply rail without external pullup circuitry, making these
devices ideal for interface with both CMOS and TTL logic. All
input and output pins can tolerate a continuous short-circuit
fault condition to either rail. Internal hysteresis ensures clean
output switching, even with slow-moving input signals.
The devices are higher-speed, lower-power, and lower-
cost upgrades to industry-standard comparators MAX941/
The MAX9140 are offered in tiny 5-pin SC70 and SOT23
packages. The MAX9141 and MAX9142 are available in
8-pin SOT23 and SO packages, while the MAX9144 is
available in both 14-pin SO and TSSOP packages.
●● Line Receivers
●● Battery-Powered Systems
●● Threshold Detectors/Discriminators
●● 3V/5V Systems
●● Zero-Crossing Detectors
●● Sampling Circuits
●● Fast, 40ns Propagation Delay (10mV Overdrive)
●● Low Power
• 150μA Supply Current Per Comparator (3V)
●● Optimized for 3V and 5V Applications
●● Rail-to-Rail Input Voltage Range
●● Low, 500μV Offset Voltage
●● Internal Hysteresis for Clean Switching
●● Outputs Swing 300mV of Power Rails
●● CMOS/TTL-Compatible Outputs
●● Output Latch (MAX9141 Only)
●● Shutdown Function (MAX9141 Only)
●● Available in SC70 and SOT23 Packages
Note: All E-grade devices are specified over the -40°C to +85°C
operating temperature range. All A-grade devices are specified
over the -40°C to +125°C operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
-Denotes a package containing lead(Pb).
T = Tape and reel.
MAX9140 5 VCC
8 N.C. OUTA 1
7 OUT INA- 2
19-2064; Rev 6; 10/15