Binary Counter. MM74HC4060 Datasheet
Revised February 1999
14 Stage Binary Counter
The MM74HC4060 is a high speed binary ripple carry
counter. These counters are implemented utilizing
advanced silicon-gate CMOS technology to achieve speed
performance similar to LS-TTL logic while retaining the low
power and high noise immunity of CMOS.
The MM74HC4060 is a 14-stage counter, which device
increments on the falling edge (negative transition) of the
input clock, and all their outputs are reset to a low level by
applying a logical high on their reset input. The
MM74HC4060 also has two additional inputs to enable
easy connection of either an RC or crystal oscillator.
This device is pin equivalent to the CD4060. All inputs are
protected from damage due to static discharge by protec-
tion diodes to VCC and ground.
s Typical propagation delay: 16 ns
s Wide operating voltage range: 2–6V
s Low input current: 1 µA maximum
s Low quiescent current: 80 µA maximum (74 Series)
s Output drive capability: 10 LS-TTL loads
Order Number Package Number
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Pin Assignments for DIP, SOIC, SOP and TSSOP
© 1999 Fairchild Semiconductor Corporation DS005354.prf