Emitting Diode. NTE3000 Datasheet

NTE3000 Diode. Datasheet pdf. Equivalent

Part NTE3000
Description Light Emitting Diode
Feature NTE3000 Light Emitting Diode Miniature, Clear Red Description: The NTE3000 is a red diffused Gallium.
Manufacture NTE
Datasheet
Download NTE3000 Datasheet



NTE3000
NTE3000
Light Emitting Diode
Miniature, Clear Red
Description:
The NTE3000 is a red diffused Gallium Arsenide phosphide diode in a two lead epoxy package with
a clear lens. The NTE3000 is intended for high volume indicator light applications. Major usage is
in applications such as diagnostic lights on printed circuit boards and panel lights. It can also be used
to displace subminiature lamps as small as T3/4 size.
Absolute Maximum Ratings:
Power Dissipation (TA = +25°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mW
Derate linearly from 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6mW/°C
Forward Current
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA
Peak (1 µsec pulse width, 0.3% duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +100°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +100°C
Lead Temperature (During Soldering, 5sec max, Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +230°C
Note 1. The leads of the device were immersed in molten solder at +230°C to a point 1/16 (1.6mm)
inch from the body of the device per MIL S–750, with a dwell time of 5 seconds.
Typical Thermal Characteristics:
Wavelength Temperature Coefficient (Case Temperature) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3nm/°C
Forward Voltage Temperature Coefficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –2.0mV/°C
Electro–Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Test Conditions
Min Typ Max Unit
Luminous Intensity
IF = 20mA, Note 2
0.5 1.4 – mcd
Peak Emission Wavelength
IF = 20mA
– 660 –
nm
Spectral Line Halfwidth
IF = 20mA
– 20 –
nm
Forward Voltage
IF = 20mA
– 1.65 2.0
V
Capacitance
V=0
– 80 –
pF
Rise & Fall Time
50System IF = 20mA
– 50 –
ns
Reverse Current
Reverse Breakdown Voltage
VR = 3.0V
IR = 100µA
– 5.0 –
5 15 –
nA
V
View Angle
Between 50% points
– 80 – degrees
Note 2. As measured with a Photo Research Corp. “SPECTRA” Microcandela Meter (Model IV–D).



NTE3000
.250
(6.35)
Min
.100 (2.54)
.020 (.508)
.025 (0.65)
.015 (0.39)
Green Mark
Indicates Cathode ()
.085 (2.18)
.038 (0.98) R
.055 (1.4)
.010 (.254)
15°
.095 (2.42)







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)