DatasheetsPDF.com

TRIAC. NTE5618 Datasheet

DatasheetsPDF.com

TRIAC. NTE5618 Datasheet
















NTE5618 TRIAC. Datasheet pdf. Equivalent













Part

NTE5618

Description

TRIAC



Feature


NTE5611 thru NTE5618 TRIAC – 10 Amp De scription: The NTE5611 through NTE5618 TRIACs are designed primarily for full wave AC control applications, such as light dimmers, motor controls, heating controls, and power supplies; or where ver full– wave silicon gate controlle d solid–state devices are needed. TRI AC type thyristors switch from a blocki ng to a conducting state f.
Manufacture

NTE Electronics

Datasheet
Download NTE5618 Datasheet


NTE Electronics NTE5618

NTE5618; or either polarity of applied anode volt age with positive or negative gate trig gering. Features: D All Diffused and Pa ssivated Junctions for Greater Paramete r Uniformity and Stability D Small, Rug ged, Thermopad Construction for Low The rmal Resistance, High Heat Dissipation and Durability. D Gate Triggering Guara nteed in Four Modes Absolute Maximum Ra tings: (Note 1) Re.


NTE Electronics NTE5618

petitive Peak Off–State Voltage (TJ = +100°C, Note 2), VDRM NTE5611 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V NTE5612 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V NTE5613 . . . .


NTE Electronics NTE5618

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V NTE5615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300V NTE5618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .





Part

NTE5618

Description

TRIAC



Feature


NTE5611 thru NTE5618 TRIAC – 10 Amp De scription: The NTE5611 through NTE5618 TRIACs are designed primarily for full wave AC control applications, such as light dimmers, motor controls, heating controls, and power supplies; or where ver full– wave silicon gate controlle d solid–state devices are needed. TRI AC type thyristors switch from a blocki ng to a conducting state f.
Manufacture

NTE Electronics

Datasheet
Download NTE5618 Datasheet




 NTE5618
NTE5611 thru NTE5618
TRIAC – 10 Amp
Description:
The NTE5611 through NTE5618 TRIACs are designed primarily for full–wave AC control applica-
tions, such as light dimmers, motor controls, heating controls, and power supplies; or wherever full–
wave silicon gate controlled solid–state devices are needed. TRIAC type thyristors switch from a
blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate
triggering.
Features:
D All Diffused and Passivated Junctions for Greater Parameter Uniformity and Stability
D Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation
and Durability.
D Gate Triggering Guaranteed in Four Modes
Absolute Maximum Ratings: (Note 1)
Repetitive Peak Off–State Voltage (TJ = +100°C, Note 2), VDRM
NTE5611 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
NTE5612 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
NTE5613 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V
NTE5615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300V
NTE5618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V
On–State Current RMS (TC = +75°C), IT(RMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10A
Peak Surge Current (One Full Cycle, 60Hz, TJ = –40° to +100°C), ITSM . . . . . . . . . . . . . . . . . . 100A
Circuit Fusing Considerations (TJ = –40° to +100°C, t = 1.0 to 8.3ms), I2t . . . . . . . . . . . . . . . . 40A2s
Peak Gate Power, PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10W
Average Gate Power, PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5W
Peak Gate Current, IGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +100°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Mounting Torque (6–32 Screw, Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12in. lb.
Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2°C/W
Thermal Resistance, Case–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50°C/W
Note 1. NTE5618 is a discontinued device and no longer available.
Note 2. Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant
current source for blocking capability such that the voltage applied exceeds the rated block-
ing voltage.
Note 3. Torque rating applies with use of torque washer. Mounting torque in excess of 8 in. lbs. does
not appreciably lower case–to–sink thermal resistance. Anode lead and heatsink contact
pad are common.
Note 4. For soldering purposes (either terminal connection or device mounting), soldering tempera-
tures shall not exceed +230°C.




 NTE5618
Electrical Characteristics: (TC = +25°C unless otherwise specified)
Parameter
Symbol
Peak Blocking Current (Either Direction)
(Rated VDRM, TJ = 100°C, Gate Open)
IDRM
OnState Voltage (Either Direction)
(ITM = 14A Peak)
Gate Trigger Current (Continuous DC)
(Main Terminal Voltage = 12V, RL = 100)
MT2 (+), G (+); MT2 (), G ()
MT2 (+), G (); MT2 (), G (+)
Gate Trigger Voltage (Continuous DC)
(Main Terminal Voltage = 12V, RL = 100)
MT2 (+), G (+); MT2 (), G ()
MT2 (+), G (); MT2 (), G (+)
Gate Trigger Voltage (Continuous DC All Modes)
(Main Terminal Voltage = Rated VDRM, RL = 100, TJ = +100°C)
Holding Current (Either Direction)
(Main Terminal Voltage = 12Vdc, Gate Open, IT = 100mA)
TurnOn Time
(ITM = 14A, IGT = 100mA)
Blocking Voltage Application Rate at Commutation
(At VDRM, TJ = +75°C, Gate Open)
VTM
IGT
VGT
VGD
IH
ton
dv/dt
Min Typ Max Unit
mA
––2
V
1.3 1.8
mA
– – 50
– – 75
V
0.9 2.0
1.0 2.5
V
0.2 – –
mA
– – 50
µs
1.5
V/µs
5
.530 (13.4) Max
.143 (3.65) Dia Thru
.668
(17.0)
Max
MT1
Gate
.655
(16.6)
Max
Heat Sink Contact
Area (Bottom)
MT2 (Heat Sink Area)
.166 (4.23)
.150 (3.82) Max








Recommended third-party NTE5618 Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)