OET025YGJJ-A WATT Datasheet

OET025YGJJ-A Datasheet, PDF, Equivalent


Part Number

OET025YGJJ-A

Description

TRIPLE OUTPUT / 25 WATT

Manufacture

Power-One

Total Page 3 Pages
Datasheet
Download OET025YGJJ-A Datasheet


OET025YGJJ-A
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
OET SERIES - TRIPLE OUTPUT, 25 WATT
DESCRIPTION
FEATURES
OET triple output DC/DC converters provide 25
• Triple Output 2” x 2” • Input Undervoltage
Watts of output power in an industry standard
package. The OET series features excellent efficiency
and industry-leading power density. The OET features
open-frame packaging to provide maximum useable
power with minimal thermal constraints. These units
Open-Frame
Construction
1.5 Million Hours
Short Circuit and
MTBF
Lockout
24V or 48V Input
Versions
1500V Isolation
are fully compatible with production board washing
Overvoltage Protection • 100°C Baseplate
processes.
Operation
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
Turn On Voltage 24V/48V Models
Turn On Hysteresis
Reflected Ripple Input Current
Input Reverse Voltage Protection
Input
18 - 36 VDC
34 - 75 VDC
<17V / <34V
1V Nominal
50 mA pk-pk
Shunt Diode
Output
Setpoint Accuracy
±1%
Line Regulation Vin Min. - Vin Max., Iout Rated
0.2% Vout
Load Regulation Iout Min. - Iout Max., Vin Nom.
0.5% Vout
Secondary Output Regulation, All Line/Load Conditions
10% Vout
Minimum Output Current
10 % Iout rated
Dynamic Regulation, Loadstep
25% Iout
Pk Deviation
Settling Time
4% Vout
500 µs
Short Circuit And Overcurrent Protection
Shutdown and Self-Recovering
Power LimitThreshold Range
110 - 130%
Short Circuit
OVP Trip Range
OVP Type
200% Iout Nom.
115 - 140% Vout Nom.
Self-Recovering
General
Switching Frequency
Turn-On Time
Remote Shutdown
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF(Bellcore TR-NWT-000332)
Safety
Weight (approx.)
500 kHz
10ms
Positive Logic
1500 VDC
1050 VDC
1050 VDC
0.03%/°C
-40 to +100°C
-40 to +125°C
105 to 115°C
95%
5 g, 10 - 55 Hz
1.5 x 106 hrs
UL, CUL, TUV
1.3 oz
1
Efficiency vs. Load (48V Input)
90
85
80
75
EFF. OETZGHH-A
70 EFF. OETZGJJ-A
65
60
10 20 30 40 50 60 70 80 90 10
LOAD %
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.

OET025YGJJ-A
OET SERIES - TRIPLE OUTPUT, 25 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
24 18 - 36 1.4 3.3, –12
24 18 - 36 1.4 3.3, –15
24 18 - 36 1.8 5, –12
24 18 - 36 1.8 5, –15
48 34 - 75 0.7 3.3, –12
48 34 - 75 0.7 3.3, –15
48 34 - 75 0.9 5, –12
48 34 - 75 0.9 5, –15
Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
MECHANICAL DRAWING
3.5, –0.35
3.5, –0.28
3.5, –0.31
3.5, –0.25
3.5, –0.35
3.5, –0.28
3.5, –0.31
3.5, –0.25
Ripple & Noise
Pk-Pk (mV)
50/120/120
50/150/150
50/120/120
50/150/150
50/120/120
50/150/150
50/120/120
50/150/150
Efficiency
Typ. **
85%
85%
86%
86%
85%
85%
85%
85%
Model
OET020YEHH-A
OET020YEJJ-A
OET025YGHH-A
OET025YGJJ-A
OET020ZEHH-A
OET020ZEJJ-A
OET025ZGHH-A
OET025ZGJJ-A
2.00"
(50.8mm)
0.600"(15.2mm)
0.400"(10.2mm)
0.200"(5.1mm)
0
1
2
3
4
-0.50"(-12.7mm)
-0.10" 0
(-2.5mm)
BOTTOM VIEW
5 1.100"(27.9mm)
6 0.700"(17.8mm)
2.00"
(50.8mm)
7 0.300"(7.6mm)
8 -0.100"(-2.5mm)
1.800"
(45.7mm)
0.18"
(4.6mm)
DIA 0.040"
(1.02mm)
0.375"
(9.5mm)
Thermal Impedance
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
11.0 °C/W
7.5 °C/W
5.0 °C/W
3.7 °C/W
3.1 °C/W
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
Pin Function
1 +Vin
2 -Vin
3 case
4 enable
5 +Vout (aux)
6 +Vout (main)
7 common
8 -Vout (aux)
2
Tolerances
Inches:
.XX ± 0.020
.XXX ± 0.010
(Millimeters)
.X ± 0.5
.XX ± 0.25
Pin:
± 0.002
± 0.05
(Dimensions as listed unless otherwise
specified.)


Features (888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com OET SERIES - TRI PLE OUTPUT, 25 WATT DESCRIPTION OET tri ple output DC/DC converters provide 25 Watts of output power in an industry st andard package. The OET series features excellent efficiency and industry-lead ing power density. The OET features ope n-frame packaging to provide maximum us eable power with minimal thermal constr aints. These units are fully compatible with production board washing processe s. TECHNICAL SPECIFICATIONS Input Volta ge Range 24 VDC Nominal 48 VDC Nominal Turn On Voltage 24V/48V Models Turn On Hysteresis Reflected Ripple Input Curre nt Input Reverse Voltage Protection Out put Setpoint Accuracy ±1% Line Regulat ion Vin Min. - Vin Max., Iout Rated 0.2 % V out Load Regulation Iout Min. - Iou t Max., Vin Nom. 0.5% V out Secondary O utput Regulation, All Line/Load Conditi ons 10% Vout Minimum Output Current 10 % Iout rated Dynamic Regulation, Loadst ep 25% Iout Pk Deviation 4% Vout Settling Time 500 µs Short Circ.
Keywords OET025YGJJ-A, datasheet, pdf, Power-One, TRIPLE, OUTPUT, /, 25, WATT, ET025YGJJ-A, T025YGJJ-A, 025YGJJ-A, OET025YGJJ-, OET025YGJJ, OET025YGJ, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)