Operational Amplifier. CA3140 Datasheet

CA3140 Amplifier. Datasheet pdf. Equivalent

Part CA3140
Description 4.5MHz / BiMOS Operational Amplifier
Feature ® CA3140, CA3140A Data Sheet July 11, 2005 FN957.10 4.5MHz, BiMOS Operational Amplifier with MOSFE.
Manufacture Intersil
Datasheet
Download CA3140 Datasheet



CA3140
®
Data Sheet
CA3140, CA3140A
July 11, 2005
FN957.10
4.5MHz, BiMOS Operational Amplifier with
MOSFET Input/Bipolar Output
The CA3140A and CA3140 are integrated circuit operational
amplifiers that combine the advantages of high voltage
PMOS transistors with high voltage bipolar transistors on a
single monolithic chip.
The CA3140A and CA3140 BiMOS operational amplifiers
feature gate protected MOSFET (PMOS) transistors in the
input circuit to provide very high input impedance, very low
input current, and high speed performance. The CA3140A
and CA3140 operate at supply voltage from 4V to 36V
(either single or dual supply). These operational amplifiers
are internally phase compensated to achieve stable
operation in unity gain follower operation, and additionally,
have access terminal for a supplementary external capacitor
if additional frequency roll-off is desired. Terminals are also
provided for use in applications requiring input offset voltage
nulling. The use of PMOS field effect transistors in the input
stage results in common mode input voltage capability down
to 0.5V below the negative supply terminal, an important
attribute for single supply applications. The output stage
uses bipolar transistors and includes built-in protection
against damage from load terminal short circuiting to either
supply rail or to ground.
The CA3140A and CA3140 are intended for operation at supply
voltages up to 36V (±18V).
Features
• MOSFET Input Stage
- Very High Input Impedance (ZIN) -1.5T(Typ)
- Very Low Input Current (Il) -10pA (Typ) at ±15V
- Wide Common Mode Input Voltage Range (VlCR) - Can be
Swung 0.5V Below Negative Supply Voltage Rail
- Output Swing Complements Input Common Mode
Range
• Directly Replaces Industry Type 741 in Most Applications
Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Ground-Referenced Single Supply Amplifiers in
Automobile and Portable Instrumentation
• Sample and Hold Amplifiers
• Long Duration Timers/Multivibrators
(µseconds-Minutes-Hours)
• Photocurrent Instrumentation
• Peak Detectors
• Active Filters
http://www.DataSheet4U.net/
Comparators
• Interface in 5V TTL Systems and Other Low
Supply Voltage Systems
• All Standard Operational Amplifier Applications
• Function Generators
• Tone Controls
• Power Supplies
• Portable Instruments
• Intrusion Alarm Systems
Pinout
CA3140 (PDIP, SOIC)
TOP VIEW
OFFSET
NULL
1
INV. INPUT 2
NON-INV.
INPUT
3
V- 4
-
+
8 STROBE
7 V+
6 OUTPUT
5
OFFSET
NULL
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Harris Corporation 1998, Copyright Intersil Americas Inc. 2002, 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
datasheet pdf - http://www.DataSheet4U.net/



CA3140
CA3140, CA3140A
Ordering Information
PART NUMBER
(BRAND)
CA3140AE
CA3140AEZ*
(See Note)
TEMP.
RANGE (°C)
PACKAGE
-55 to 125 8 Ld PDIP
-55 to 125 8 Ld PDIP
(Pb-free)
PKG.
DWG. #
E8.3
E8.3
CA3140AM
(3140A)
-55 to 125 8 Ld SOIC
M8.15
CA3140AM96
(3140A)
-55 to 125 8 Ld SOIC Tape and Reel
CA3140AMZ
-55 to 125 8 Ld SOIC
(3140A) (See Note)
(Pb-free)
M8.15
CA3140AMZ96
-55 to 125 8 Ld SOIC Tape and Reel
(3140A) (See Note)
(Pb-free)
CA3140E
-55 to 125 8 Ld PDIP
E8.3
CA3140EZ*
(See Note)
-55 to 125 8 Ld PDIP
(Pb-free)
E8.3
CA3140M
(3140)
-55 to 125 8 Ld SOIC
M8.15
CA3140M96
(3140)
-55 to 125 8 Ld SOIC Tape and Reel
CA3140MZ
(3140) (See Note)
-55 to 125 8 Ld SOIC
(Pb-free)
M8.15
CA3140MZ96
(3140) (See Note)
-55 to 125 8 Ld SOIC Tape and Reel
(Pb-free)
*Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures
that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
http://www.DataSheet4U.net/
2 FN957.10
July 11, 2005
datasheet pdf - http://www.DataSheet4U.net/





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)