Multilayer Varistors. 23225731xxx Datasheet

23225731xxx Varistors. Datasheet pdf. Equivalent

Part 23225731xxx
Description Surface Mount Multilayer Varistors
Feature 2322 573 1.... Vishay BCcomponents Surface Mount Multilayer Varistors FEATURES ∑ Surface mount mult.
Manufacture Vishay Siliconix
Datasheet
Download 23225731xxx Datasheet

2322 573 1.... Vishay BCcomponents Surface Mount Multilayer 23225731xxx Datasheet
Recommendation Recommendation Datasheet 23225731xxx Datasheet




23225731xxx
2322 573 1....
Vishay BCcomponents
Surface Mount Multilayer Varistors
QUICK REFERENCE DATA
PARAMETER
Maximum continuous voltage:
DC
AC
Maximum clamping voltage at 1 A
Capacitance range
Maximum transient energy (10 ¥ 1000 ms)
Maximum peak current (8 ¥ 20 ms)
Response time
Operating temperature range
Storage temperature range
Maximum continuous dissipation
VALUE
3.2 to 31
2.5 to 25
12 to 65
60 to 480
0.1
30
0.5
-55 to 125
-25 to 45
5
UNIT
V
V
V
pF
J
A
ns
C
C
mW
FEATURES
Surface mount multilayer surge suppressor
Inherent bidirectional clamping
Low capacitance types available
Excellent energy/volume ratio
Suitable for wave or reflow soldering
Compliance to IEC 1000-4-2
Size 0603 (1608M) multilayer chip varistor with
AgPd terminations.
APPLICATIONS
Data lines and I/O port protection
Protection against EMI and ESD transients
On-board protection of ICs and transistors
Modem protection
LCD protection
PACKAGING
Available in 8 mm paper tape on reel packaging and in bulk
on request.
ELECTRICAL DATA AND ORDERING INFORMATION
MAXIMUM
OPERATING VOLTAGE
RMS(1)
(V)
DC
(V)
VOLTAGE(2)
at 1 mA
MIN.
(V)
MAX.
(V)
MAXIMUM
CLAMPING
VOLTAGE
at 1 A
(V)
CAP.
at 1 kHz
(pF)
TOL.
(%)
CATALOG NUMBERS
2322 573.....
2.5 3.2 4.1 6.0
4.0 5.5 6.4 9.6
10.0 14.0 15.3 21.0
14.0 18.0 19.8 25.7
17.0 22.0 24.3 29.7
20.0 26.0 29.7 38.6
25.0 31.0 35.1 45.6
12
21
35
40
46
56
65
480 typ.
290 typ.
110 typ.
80 typ.
75 typ.
70 typ.
60 typ.
12583
10403
11003
11403
11703
12003
12503
Notes
1. The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based
on multiplying the peak voltage by a factor of 0.707.
2. The voltage measured at 1 mA meets the requirements of “paragraph 4.3 of CECC specification 42000”.
Document Number: 29041
Revision: 14-Jun-04
For technical questions contact: nlr.europe@vishay.com
www.vishay.com
5



23225731xxx
2322 573 1....
Vishay BCcomponents
DIMENSIONS in millimeters
T
L
V/I CHARACTERISTIC
Surface Mount Multilayer Varistors
LW
W
1.6 ±0.15
0.8 ±0.15
T
MAX.
1.0
MAX. LEAKAGE CURRENT
100
MAX. CLAMPING VOLTAGE
MAX. LEAKAGE CURRENT
1000.000
MAX. CLAMPING VOLTAGE
10 100.000
1
1.0E-05
1.0E-04
1.0E-03
1.0E-02
1.0E-01
CURRENT (A)
1.0E+00
1.0E+01 1.0E+02
57xx1003
57xx0403
57xx2583
10.000
1.0E-05
1.0E-04
1.0E-03
1.0E-02
1.0E-01
CURRENT (A)
1.0E+00
1.0E+01 1.0E+02
57xx2503
57xx2003
57xx1703
57xx1403
TESTS AND REQUIREMENTS
TEST / CONDITIONS OF TEST
D OR ND*
Sub-group A1
ND
Visual examination “IEC 4.3.1”
Sub-group A2
ND
Voltage (CECC 4.3); Clamping voltage (CECC B.2.7)
Sub-group A3
ND
Dimensions (gauging) “IEC 4.3.3”
Sub-group B1
D
Solderability:
Test Td of “IEC 60068-2-20”, solder bath method
* D = Destructive, N = Non-destructive
PROCEDURE
at 1 mA
235 C ±5 C for 5 ±0.5 s; at 1 mA
PERFORMANCE
no visible damage
as specified
see 4.3.3
no visible damage;
as in 9.2.1;
as specified
www.vishay.com
6
For technical questions contact: nlr.europe@vishay.com
Document Number: 29041
Revision: 14-Jun-04





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)