|
|
Purpose Photocoupler. PC817X Datasheet |
|
|
PC817X Series
∗4-channel package type is also available.
(model No. PC847X Series)
PC817X Series
DIP 4pin General Purpose
Photocoupler
■ Description
PC817X Series contains an IRED optically coupled
to a phototransistor.
It is packaged in a 4pin DIP, available in wide-lead
spacing option and SMT gullwing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V(*) and CTR is 50%
to 600% at input current of 5mA.
■ Features
1. 4pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. High collector-emitter voltage (VCEO:80V(*))
4. Current transfer ratio (CTR : MIN. 50% at IF=5 mA,
VCE=5V)
5. Several CTR ranks available
6. High isolation voltage between input and output
(Viso(rms) : 5.0 kV)
(*) Up to Date code "P7" (July 2002) VCEO : 35V.
From the production Date code "J5" (May 1997) to "P7" (July
2002), however the products were screened by BVCEO≥70V.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC817)
2. Package resin : UL flammability grade
(94V-0)
■ Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials and impedances
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03101EN
1 Date Sep. 30. 2003
© SHARP Corporation
|
|
■ Internal Connection Diagram
14
23
1 Anode
2 Cathode
3 Emitter
4 Collector
PC817X Series
■ Outline Dimensions
1. Through-Hole [ex. PC817X]
Anode mark
Rank mark
Factory identification mark
Date code
14
PC817
23
6.5±0.5
7.62±0.3
4.58±0.5
(Unit : mm)
2. SMT Gullwing Lead-Form [ex. PC817XI]
Anode mark
1
Rank mark
Factory identification mark
Date code
4
2 PC817 3
6.5±0.5
7.62±0.3
4.58±0.5
Epoxy resin
0.26±0.1
θ
θ : 0 to 13˚
θ
0.5±0.1
3. Wide Through-Hole Lead-Form [ex. PC817XF]
Rank mark
Factory identification mark
Anode mark
Date code
14
2 PC817 3
6.5±0.5
7.62±0.3
4.58±0.5
1.0+−00.4
Epoxy resin
10.0+−00.5
1.0+−00.4 2.54±0.25
4. Wide SMT Gullwing Lead-Form [ex. PC817XFP]
Rank mark
Anode mark
Factory identification mark
Date code
14
2 PC817 3
6.5±0.5
7.62±0.3
4.58±0.5
Epoxy resin
10.16±0.5
0.26±0.1
0.5±0.1
0.75±0.25
Epoxy resin
10.16±0.5
12.0MAX
0.75±0.25
0.5±0.1
Product mass : approx. 0.21g
Sheet No.: D2-A03101EN
2
|
Date code (2 digit)
A.D.
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
1st digit
Year of production
Mark A.D
A 2002
B 2003
C 2004
D 2005
E 2006
F 2007
H 2008
J 2009
K 2010
L 2011
M 2012
N ···
Mark
P
R
S
T
U
V
W
X
A
B
C
···
repeats in a 20 year cycle
2nd digit
Month of production
Month
Mark
January
1
February
2
March
3
April
4
May 5
June 6
July 7
August
8
September
9
October
O
November
N
December
D
Factory identification mark
Factory identification Mark
Country of origin
no mark
Japan
Indonesia
Philippines
China
* This factory marking is for identification purpose only.
Please contact the local SHARP sales representative to see the actural status of the
production.
Rank mark
Refer to the Model Line-up table
PC817X Series
Sheet No.: D2-A03101EN
3
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |