|
|
BH18FB1WG Regulators Datasheet |
|
|
| Part Number | BH18FB1WG |
| Description | Standard CMOS LDO Regulators |
| Manufacture | Rohm |
| Total Page | 9 Pages |
| PDF Download |
CMOS LDO Regulator Series for Portable Equipments
Standard CMOS LDO Regulators
BH ŜŜ FB1WG series, BHŜŜ FB1WHFV series,
BH ŜŜ LB1WG series, BHŜŜ LB1WHFV series
Large Current 300mA
CMOS LDO Regulators
BH ŜŜ MA3WHFV Series
No.10020ECT02
Description
The BHŜŜFB1W, BHŜŜLB1W and BHŜŜMA3W series are low dropout CMOS regulators with 150 mA and 300 mA
output that have ±1% high accuracy output voltage.
The BHŜŜFB1W series combines 40µA low current consumption and a 70 dB high ripple rejection ratio by utilizing output
level CMOS technology. The components can be easily mounted into the small standard SSOP5 and the ultra-small
HVSOF5/HVSOF6 packages.
Features
1) High accuracy output voltage: ±1%
2) High ripple rejection ratio: 70 dB (BHŜŜFB1WHFV/WG, BHŜŜLB1WHFV/WG)
3) Low dropout voltage: 60 mV (when current is 100 mA) (BHŜŜMA3WHFV)
4) Stable with ceramic output capacitors
5) Low Bias current : 40µA (IO = 50 mA) (BHŜŜFB1WHFV/WG)
6) Output voltage ON/OFF control
7) Built-in over-current protection and thermal shutdown circuits
8) Ultra-small power package: HVSOF5 (BHŜŜFB1WHFV, BHŜŜLB1WHFV)
9) Ultra-small power package: HVSOF6 (BHŜŜMA3WHFV)
Applications
Battery-driven portable devices and etc.
Line up
150mA BHŜŜFB1W and BHŜŜLB1W Series
Part Number
1.5 1.8 1.85 2.5 2.8 2.9 3.0 3.1 3.3 Package
BHŜŜFB1WG
---
SSOP5
BHŜŜFB1WHFV - - -
HVSOF5
BHŜŜLB1WG
- - - - - - - SSOP5
BHŜŜLB1WHFV
- - - - - - HVSOF5
300mA BHŜŜMA3WHFV series
Part Number
1.5 1.8 2.5 2.8 2.9 3.0 3.1 3.3
Package
BHŜŜMA3WHFV
HVSOF6
Part Number: B H ŜŜ F B 1 W Ŝ , B H ŜŜ L B 1 W Ŝ
a ba b
Part Number: B H ŜŜ M A 3 W Ŝ
ab
Symbol
Details
Output Voltage Designation
ŜŜ Output Voltage (V) ŜŜ Output Voltage (V)
15 1.5V (Typ.) 29 2.9V (Typ.)
a 18 1.8V (Typ.) 30 3.0V (Typ.)
1J 1.85V (Typ.) 31
3.1V (Typ.)
25 2.5V (Typ.) 33 3.3V (Typ.)
28 2.8V (Typ.)
b Package: G : SSOP5 HFV : HVSOF5
Symbol
Details
Output Voltage Designation
ŜŜ Output Voltage (V) ŜŜ Output Voltage (V)
15 1.5V (Typ.) 29
2.9V (Typ.)
a
18 1.8V (Typ.) 30
3.0V (Typ.)
25 2.5V (Typ.) 31
3.1V (Typ.)
28 2.8V (Typ.) 33
3.3V (Typ.)
b Package: HFV : HVSOF6
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/8
2010.07 - Rev. C
|
BH ĄĄFB1WG series, BHĄĄFB1WHFV series,
BH ĄĄLB1WG series, BHĄĄLB1WHFV series, BH ĄĄMA3WHFV series
Absolute maximum ratings (Ta = 25 C)
Parameter
Applied supply voltage
Symbol
VMAX
Power dissipation
Pd
Operating temperature range Topr
Storage temperature range Tstg
Limits
-0.3 ~ +6.5
680 (HVSOF6)
410 (HVSOF5)
540 (SSOP5)
-40 ~ +85
-55 ~ +125
Unit
V
mW
C
C
Technical Note
Recommended operating range
Parameter
Power supply voltage
BH MA3W
Output current BH FB1W
BH LB1W
Symbol
VIN
IOUT
Recommended operating conditions
Parameter
Symbol
Input capacitor
CIN
Output capacitor
Co
Noise decrease capacitor Cn
Min.
0.1
1.0
-
Min.
2.5
-
-
-
Typ.
-
-
0.01
Typ.
-
-
-
-
Max.
-
-
0.22
Max.
5.5
300
150
150
Unit
V
mA
mA
mA
Unit Conditions
μF Ceramic capacitor recommended
μF Ceramic capacitor recommended
μF Ceramic capacitor recommended
BH FB1WHFV/WG , BH LB1WHFV/WG
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Output voltage
1 VOUT VOUT 0.99 VOUT VOUT 1.01 V IOUT=1mA
Circuit current
I GND
-
40 70
μA IOUT=50mA
Circuit current(STBY)
I STBY -
- 1.0 μA STBY=0V
Ripple rejection ratio
RR - 70 - dB VRR=-20dBv, fRR=1kHz, IOUT=10mA
Load response 1
LTV1
-
50
-
mV IOUT=1mA to 30mA
Load response 2
LTV2
-
50
-
mV IOUT=30mA to 1mA
Dropout voltage
3 VSAT
-
250 450 mV VIN=0.98 VOUT, IOUT=100mA
Line regulation
VDL1
-
2
20 mV VIN=VOUT+0.5V to 5.5V
4
Load regulation (1)
VDL01
-
10 30 mV IOUT=1mA to 100mA
Load regulation (2)
Over current protection
limit current
VDL02
ILMAX
- 15 90 mA IOUT=1mA to 150mA
150 3 250 3 420 3
150 5 300 5 450 5 mA Vo=VOUT 0.98
Short current
I SHORT
-
-
50 3
40 5
-
-
mA Vo=0V
STBY pull-down resistor
RSTB 550
1100 2200
kΩ
STBY
ON VSTBH 1.5 - Vcc V
control voltage
OFF VSTBL -0.3
-
0.3
V
5 BH25,28,29,30,31,33WHFV/G
BH MA3WHFV
Parameter
Symbol
VOUT
I GND
I STBY
RR
VSAT1
VDL1
VDL01
VDL02
ILMAX
I SHORT
Min.
-
-
-
-
-
-
-
-
-
-
Typ.
VOUT
65
-
60
60
2
6
18
±100
600
100
Max.
95
1.0
-
90
20
30
90
-
-
-
Unit Conditions
V IOUT=1mA
μA IOUT=1mA
μA STBY=0V
dB VRR=-20dBv, fRR=1kHz, IOUT=10mA
mV VIN=0.98 X VOUT, IOUT=100mA
mV VIN=VOUT+0.5V to 5.5V
mV IOUT=1mA to 100mA
mV IOUT=1mA to 300mA
ppm/ C IOUT=1mA, Ta=-40 to +85 C
mA Vo=VOUT X 0.85
mA Vo=0V
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/8
2010.07 - Rev. C
|
| Features | CMOS LDO Regulator Series for Portable E quipments Standard CMOS LDO Regulators BH ŜŜ FB1WG series, BHŜŜ FB1WHFV se ries, BH ŜŜ LB1WG series, BHŜŜ LB1W HFV series Large Current 300mA CMOS LDO Regulators BH ŜŜ MA3WHFV Series No. 10020ECT02 Description The BHŜŜFB1W, BHŜŜLB1W and BHŜŜMA3W series are l ow dropout CMOS regulators with 150 mA and 300 mA output that have ±1% high a ccuracy output voltage. The BHŜŜFB1W series combines 40µA low current consu mption and a 70 dB high ripple rejectio n ratio by utilizing output level CMOS technology. The components can be easil y mounted into the small standard SSOP5 and the ultra-small HVSOF5/HVSOF6 pack ages. Features 1) High accuracy output voltage: ±1% 2) High ripple rejection ratio: 70 dB (BHŜŜFB1WHFV/WG, BHŜŜL B1WHFV/WG) 3) Low dropout voltage: 60 m V (when current is 100 mA) (BHŜŜMA3WH FV) 4) Stable with ceramic output capac itors 5) Low Bias current : 40µA (IO = 50 mA) (BHŜŜFB1WHFV/WG) 6) Output voltage ON/OFF control 7) . |
| Keywords | BH18FB1WG, datasheet, pdf, Rohm, Standard, CMOS, LDO, Regulators, H18FB1WG, 18FB1WG, 8FB1WG, BH18FB1W, BH18FB1, BH18FB, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute |
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |