89C5122 AT89C5122 Datasheet

89C5122 Datasheet, PDF, Equivalent


Part Number

89C5122

Description

AT89C5122

Manufacture

ATMEL Corporation

Total Page 30 Pages
Datasheet
Download 89C5122 Datasheet


89C5122
Features
80C51 Core :
– 6 Clocks per Instruction
– Speed up to 16 MHz
768 Bytes RAM
AT83C5122: 32 Kbytes ROM
AT83C5123: 30 Kbytes ROM
AT85C5122: 32 Kbytes Code RAM and 32 Kbytes ROM
AT89C5122 : 32 Kbytes Flash
AT85EC5122, AT83EC5123, AT83EC5122: Additional 512 Bytes EEPROM (AT24C04)
Multi-protocol Smart Card Interface
Certified According to ISO7816, EMV2000, GIE-CB and WHQM Standards
Asynchronous Protocols T = 0 and T = 1, with Direct and Inverse Modes
Step-up/Down Converter with Programmable Voltage Output: 5V and 3V (60 mA),
1.8V (20 mA)
4 kV ESD Protection (MIL/STD 833 Class 3)
Alternate Card Support with CLK, IO and RST
USB Module with 7 Endpoints Programmable with In or Out Directions and with ISO,
Bulk or Interrupt Transfers
wwUwA.DRaTtawShitehetI4nUte.cgormated Baud Rate Generator (BRG)
8 MHz On-chip Oscillator Analog PLL for 96 MHz Synthesis, Possible 48 MHz Clock
Input
Two 16-bit Timer/Counters: T0 and T1
Hardware Watchdog and Power-fail Detector (PFD)
Idle and Power-down Modes
Self Powered USB
Low Power
30 mA Maximum Operating Current (at 32 MHz X1)
100 µA Maximum Power-down Current at 5.4V (without Smart Card and USB)
Voltage Range: 3.6 to 5.5V
For AT8xC5122 version:
Keyboard Interrupt Interface on Port 5 (8 Bits)
Five 8-bit I/O Ports, One 6-bit
SPI Interface (Master Slave)
Packages: VQFP64, PLCC28
Seven LED Outputs with Programmable Current Sources: 2-4-10 mA
For AT8xC5123 version:
Four LED Outputs with Programmable Current Sources: 2-4-10 mA
Two 8-bit I/O Ports, One 6-bit I/O port, One I/O bit (on LQP32 package)
Packages: LQFP32, PLCC28
C51
Microcontroller
with USB and
Smart Card
Reader
Interfaces
AT83C5122
AT83EC5122
AT85C5122
AT85EC5122
AT89C5122
AT83C5123
AT83EC5123
Preliminary
Rev. 4202B–SCR–07/03
1

89C5122
Description
www.DataSheet4U.com
AT8xC5122 is a high-performance CMOS derivative of the 80C51 8-bit microcontrollers
optimized for USB keyboard with smart card reader applications.
AT8xC5122 retains the features of the Atmel 80C51 with 32 Kbytes ROM capacity, 768
bytes of internal RAM, a 4-level interrupt system, two 16-bit timer/counters (T0/T1), a full
duplex enhanced UART (EUART) with baud rate generator (BRG) and an on-chip
oscillator.
In addition, AT8xC5122 has a USB 2.0 full-speed function controller with seven End-
points, a multi-protocol smart card interface, a dual data pointer, seven programmable
LED current sources (2-4-10 mA) and a hardware watchdog.
AT8xC5122 Flash RAM version and AT8xC5122 Code RAM version with 32 Kbytes
memory can be loaded by In-System Programming (ISP) software residing in the on-
chip ROM from USB or UART.
AT8xC5122 have 2 software-selectable modes of reduced activity for further reduction
in power consumption.
AT8xC5123 is a low pin count of the AT8xC5122. This version doesnt have the key-
board and the SPI interfaces. The PLCC28 packages for AT8xC5122 and AT8xC5123
have the same pinout. The AT8xC5123 is also proposed in a VQFP32 package.
AT8xC5122 and AT8xC5123 are proposed with a 512 bytes EEPROM (AT24C04) and
respectively named AT8xEC5122 and AT8xEC5123.
2 AT8xC5122/23
4202BSCR07/03


Features Features • 80C51 Core : – 6 Clocks p er Instruction – Speed up to 16 MHz 768 Bytes RAM • AT83C5122: 32 Kbyt es ROM • AT83C5123: 30 Kbytes ROM • AT85C5122: 32 Kbytes Code RAM and 32 K bytes ROM • AT89C5122 : 32 Kbytes Fla sh • AT85EC5122, AT83EC5123, AT83EC51 22: Additional 512 Bytes EEPROM (AT24C0 4) • Multi-protocol Smart Card Interf ace – Certified According to ISO7816, EMV2000, GIE-CB and WHQM Standards – Asynchronous Protocols T = 0 and T = 1 , with Direct and Inverse Modes – Ste p-up/Down Converter with Programmable V oltage Output: 5V and 3V (60 mA), 1.8V (20 mA) – 4 kV ESD Protection (MIL/ST D 833 Class 3) • Alternate Card Suppo rt with CLK, IO and RST • USB Module with 7 Endpoints Programmable with In o r Out Directions and with ISO, Bulk or Interrupt Transfers www.DataSheet4U.com • UART with Integrated Baud Rate Gen erator (BRG) • 8 MHz On-chip Oscillat or Analog PLL for 96 MHz Synthesis, Pos sible 48 MHz Clock Input • Two 16-bit Timer/Counters: T0 and T1 • Hardware Watchdog and Power-fail .
Keywords 89C5122, datasheet, pdf, ATMEL Corporation, , AT89C5122, 9C5122, C5122, 5122, 89C512, 89C51, 89C5, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)