ALN0859 Amplifier Datasheet

ALN0859 Datasheet, PDF, Equivalent


Part Number

ALN0859

Description

Low Noise Amplifier

Manufacture

ETC

Total Page 1 Pages
Datasheet
Download ALN0859 Datasheet


ALN0859
Features
37.5 dB Gain at 859 MHz
18 dBm P1dB
37 dBm Output IP3
0.65 dB Noise Figure
Operating at Single 5 V Supply
110 mA Current Consumption
Specifications
Description
The plerowTM ALN-series is the compactly designed sur-
face-mount module for the use of the LNA with or without
the following gain blocks in the infrastructure equipment of
the mobile wirelss (CDMA, GSM, PCS, PHS, WCDMA,
DMB, WLAN, WiBro, WiMAX), GPS, satellite communica-
tion terminals and so on. It has an exceptional performance
of low noise figure, high gain, high OIP3, and low bias cur-
rent. The stability factor is always kept less than unity over
the application band in order to confirm its unconditionally
stable implementation to the application system environ-
ment. The surface-mount module package including the
completed matching circuit and other components neces-
sary just in case allows very simple and convenient imple-
mentation onto the system board in mass production level.
Parameter
Unit
Specification
Frequency Range
Gain
Gain Flatness
Noise Figure
Output IP3
S11 / S22
Output P1dB
Supply Current
Supply Voltage
Impedance
Max. RF Input Power
@ CDMA 20FA
Package Type & Size
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
dBm
mm
824 ~ 894
37.5
± 0.5
0.65
37
-14 / -14
18
110
5
50
5
SMT, 13Wx13Lx3.8H
1) Measurement conditions are as follows: T = 25°C, VCC = 5 V, Freq. = 859 MHz, 50 ohm system.
2) OIP3 is measured with two tones at an output power of +8 dBm / tone separated by 1 MHz.
3) Note: We recommend that the VSWR toward a source and load be less than 1:4 to avoid an unwanted oscillation.
PlerowTM ALN0859
Low Noise Amplifier
2-stage Single Type
More Information
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
Outline Drawing
plerow
ALN
ASB Inc.
TOP
BOTTOM
Pin Number
3
8
10
Others
Function
RF In
RF Out
+Vcc
Ground
SIDE
: Soldering area
: 0.4 plated thru holes to
ground plane
(Unit: mm)
1/1
SUGGESTED FOOTPRINT
www.asb.co.kr
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
August 2005


Features PlerowTM ALN0859 Low Noise Amplifier Fea tures ¡¤ 37.5 dB Gain at 859 MHz ¡¤ 18 dBm P1dB ¡¤ 37 dBm Output IP3 ¡ 0.65 dB Noise Figure ¡¤ Operating a t Single 5 V Supply ¡¤ 110 mA Current Consumption Description The plerow AL N-series is the compactly designed surf ace-mount module for the use of the LNA with or without the following gain blo cks in the infrastructure equipment of the mobile wirelss (CDMA, GSM, PCS, PHS , WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals and so on. It has an exceptional performanc e of low noise figure, high gain, high OIP3, and low bias current. The stabili ty factor is always kept less than unit y over the application band in order to confirm its unconditionally stable imp lementation to the application system e nvironment. The surface-mount module pa ckage including the completed matching circuit and other components necessary just in case allows very simple and con venient implementation onto the system board in mass production level. TM .
Keywords ALN0859, datasheet, pdf, ETC, Low, Noise, Amplifier, LN0859, N0859, 0859, ALN085, ALN08, ALN0, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)